If my Roman tub spout has an anti-swivel pin screwed in to bottom of spout can I only use the same spout that is on it now?
Hi Ron, Thank you for your question. The foot print of the roman tub spout with the anti swivel pin is larger than the other spouts. In most cases the new spout will connect to the rough, but not cover the larger hole needed by the spout with the anti swivel pin.
Date published: 2014-02-03
Replacing older style Delta fixtures with new style
If we are updating our Delta roman tub fixtures, from the old foundations style with the crystal/plastic handlesfrom about 15-20 years ago, to this newer style, can we just replace the fixtures, or do we also need to replace the rough in?
Thank you for your question. If the original spout is attached to the valve by a set screw on the back, then you can replace the trim without changing the rough-in valve.
Date published: 2016-04-28
Replace a faucet that had a swivel pin
I'm replacing a brass roman tub faucet that has the anti swivel pin. Does this use the anti-swivel pin? If not which model will?
Thank you for your question. The model T2710 uses the anti-swivel pin. No other models will use the pin or cover the hole for the anti-swivel pin.
Date published: 2016-06-24