Is the Windemere Roman tub trim model BT2796 available in brushed nickel finish?
Thank you for your question, Gordon! The Stainless Steel finish (BT2796-SS) is a close match to brushed nickel.
Best regards, Jon
Date published: 2018-05-17
Will this faucet fit on the rough valve for a Delta 2710PB.
I presently have a 2710PB tub faucet. Will the BT2796-OB install properly using the rough valve installed for the 2710PB?
I also need a diverter valve for the hand shower. Do you have a matching trim for the diverter valve?
It is not that the BT2796_OB won'y fit, as it Will But there will be a hole to the side of the spout, which possibly can be repaired with a garden tub repair kit for tile etc. This is what Delta CSR recently told me and I plan on trying it.
Date published: 2018-02-18
Can this trim kit be used to replace Delta "Victorian" trim? Rough in is not readily accessible. Any adjustments needed?
Thank you for your question. If your current roman tub faucet has a set screw in the back of your original spout assembly, you can use the BT2796-OB with your current rough valve in your deck.
Date published: 2018-01-17
What is the flow rate in gpm for this faucet?
We plan on using this faucet to fill a 36 x 72 whirlpool tub. We need a high flow rate. I could not find the flow rate on the web site.
Hello Skelton MD,
Thank you for your inquiry! The flow rate of the Delta Windemere Roman Tub BT2796-SS faucet has a flow rate of 18 PGM at 60 PSI.
Date published: 2018-04-23
Replacing current faucet and handles with new one
I am doing remodel and looking to replace current faucet and handles with Windmere Roman Tub trim. I have attached photos. Faucet is approximately 14 years old. Will the valve in place work, or will i need new ones?
Thank you for your question. Since the spout is held on by a set screw on the back, this trim will work with the existing valve.
Date published: 2017-06-19
I would like to make sure that this Windemere Roman Tub Trim is a proper replacement for the 12 year old delta faucet I currently have, thanks.
Thank you for your question. If your current tub spout has a set screw on the back side of the spout, then any of our trim kits that start with a T27 will interchange for you.
If your current tub spout does not have a set screw on the back side of the spout, then you would need to install a R2707 rough in valve below your tub decking to be able to use the new trim kits.
Date published: 2018-05-03
R2707 vs R2707-PX vs R2707-MF
What are the difference among R2707, R2707-PX, and R2707-MF and which one should I choose?
I am also wondering whether there are any other parts necessary besides one of those tub roughs when I install BT2796.
Thank you for your help in advance.
Thank you for your question, Jack. The rough-in is the only thing that you will need to install this trim kit. The differences between the rough-ins are the valve connections. R2707 has smooth copper pipe for soldering, R2707-PX uses PEX crimp connections, and R2707-MF uses PEX cold expansion.
Date published: 2016-12-20
Can I add a matching hand shower to my existing setup?
Hi, I currently have this Windemere Roman Tub trim and would like to know if I can add a matching hand shower to my existing setup. Is there anything that would closely resemble the Windemere? Thanks for your help.
Thank you for your question. Unfortunately, we do not have a Windemere Roman Tub trim with a hand shower. To add a hand shower, you would need to replace the R2707 valve with an R4707 (4 hole setup) or add a transfer valve such as the RP14979 (5 hole setup).
Date published: 2016-08-30