This rough-in kit may be installed prior to choosing the specific trim and finish. Allows for construction or a renovation project to proceed without delays when narrowing down a design style. Trim kit is sold separately and is required to complete the unit. Save time, effort, and money on future renovation updates because there’s no need to alter plumbing beneath the deck.
Rough-in kit only
Must purchase trim kit to complete the unit
Solid fabricated brass end valves
Three hole installation
Flexible deck or ledge mounting arrangement
Tighten/adjust from above the deck
Uses PEX crimp ring type connections
Recommended minimum handle spacing is 10 in.
Recommended maximum handle spacing is 16 in.
5/8 in. O.D. corrugated copper supply outlet tubes
Rated 3 out of
Works but could use improvementThis rough in valve works well one installed. The ease of installation was the only hang up. If the kit included a sharkbite T and the copper flex tube was easier to bend it would have gotten the highest rating. I set my valves at the minimum spread and the copper flex tube took forever to bend correctly. Finally after some Chanel Locks and a hammer I got it bent correctly