i am installing a T50001 body spray, in my new shower.
In regards to rough in(R50001) installation, should the face of R50001 be flush with my new 1/2" thick marble tile?
Hi Sonny, Thank you for your question. The face of the R50001 will not be flush with the finished wall. The threads on the rough should be outside the finished wall. Here is a link to the spec sheet that shows the install.
Date published: 2014-10-02
Pattern and ballance loop for body sprayers?
I have 6 body sprayers for the H2Okinetic and have been debating different location in the shower. Originally I wanted 2 on 3 different walls. Possibly one wall at a different height. However I'm not sure how to fit this into a loop as I was thinking about being able to turn the different walls on separately.
Other patterns I have thought about are 3 on two walls or 4 on one and 2 another. Is there any place I can go to look at what the different location patterns for massaging, relaxation or common pattern? Also for how the piping for these options might look with what shutoff's or pressure regulators I would need?
Thank you for your question. When using the R50001 rough-in valve, it is a personal preference as to where they go. Included here is a guide to custom showering that may help in choosing where to put your valves. On page 40 of the guide is a height chart that will help.
Date published: 2016-11-11