good afternoon. in your installation instructions you recomend "balance loops". I'm wondering what will happen without them?
The homeowner wanted a 4 jet square layout with the on/off temp adjust valve and diverter valve in the center
Thank you for your question. We recommend using balance loops to help ensure that each body spray gets an equal amount of pressure. Without the balance loops, some sprays may have better flow than others.
Date published: 2017-02-08
I have finished a shower install. And found the plumber never picked any body spay when doing install. The shower is tiled so I am wondering do you have to use this. Exact rough in. I believe he just has a 90` 1/2" elbow.
Thank you for your question. Any of the Delta HydraChoice Body Spray Trim and Body Spray units will work with the Delta HydraChoice Body Spray Rough R50200.
Date published: 2017-03-04
Surface of the finished wall
Referring to the R50200 Installation Guide, is the surface of the finished wall referring to the back of the finished wall (backer board) or the front of the wall (tiled)? Also, what does the stud face referring to? The open wall width is 3-1/2" and I calculate that my finished wall thickness will be 7/8".
I'm trying to calculate where to place the stringer back plate to mount the shower body spray.
Hi Mxplea10, Thank you for your question!
The finished wall the instructions is referring to is the tile. Also, the face of the stud is the very front of the stud.
Date published: 2016-03-29