HydraChoice® Body Spray System
HydraChoice® Body Spray Rough
Model#: R50200
HydraChoice® Body Spray Rough
HydraChoice® Body Spray System
HydraChoice® Body Spray Rough
Model#: R50200

Finish:Not Applicable

List Price*: $85.15
This rough-in kit may be installed prior to choosing the specific trim and finish. Allows for construction or a renovation project to proceed without delays when narrowing down a design style. Trim kit is sold separately and is required to complete the unit. Save time, effort, and money on future renovation updates because there’s no need to alter plumbing behind the wall.
  • Rough-in kit only
  • Must purchase trim kit and spray heads separately to complete the unit
  • 1/2 in. rough-in
  • 2-9/16 in. thru hole in wall
  • Forged brass body
  • Includes test cap and plasterguard
  • Accommodates up to 3 in. wall thickness
  • Recommended trim kits T50010 and T50210
  • Recommended spray heads SH5000, SH5002, SH5003, or SH5005
  • Install with rough plumbing
  • Durable brass construction
  • Backed by Delta Faucet’s Lifetime Limited Warranty
California Prop 65 WARNING
Installation Information
Over All Height :
Connection Type :
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 7ms
  • reviews, product
  • bvseo-msg: Unsuccessful GET. status = 'ERROR', msg = 'Not Found.'; Unsuccessful GET. status = 'ERROR', msg = 'Not Found.';

Does the mounting flange on the R50200 have to be verticle, or can it be horizontal?

Asked by: Big Daddy
Hi Big Daddy, Thank you for your question. The valve may be installed horizontally. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2016-03-15

The valve was roughed in to far back. Is there some sort of extension kit or a deeper body spray that will work for this. 

Asked by: Nick
Unfortunately no we had to cut in to the wall and move it forward. It was a huge pain and I haven’t use that valve since. 
Answered by: Nick
Date published: 2019-07-12

Can the body spray rough in R50200 be mounted with the water supply line inlet pointing up instead of down?

Asked by: Kevin
Thank you for your question, Kevin! Although possible, we recommend installing these types of roughs with a pressure balance loop for adequate pressure to all of the body spray systems. This will work best with the rough-ins installed as shown in the installation manual below and would depend on the PSI to the system as well as how many other products water will need to be diverted to. If you have any further questions on this, please feel free to contact us directly. https://media.deltafaucet.com/MandI/75391%20Rev%20D.pdf Best regards, Edward
Answered by: Delta Faucet
Date published: 2019-02-19

I purchased the R50200 rough-in valve and the 50150 body spray. The rough-in valve opening is significantly larger than the 1/2" connector for the body spray. Both are female connections. Am I missing an adapter or is this the wrong rough-in valve?

Asked by: soppliger
Thank you for your question, soppliger! I'm sorry for any confusion and we would be happy to help. The 50150 body spray trim includes all necessary components and is meant to install directly to 1/2" male threaded pipe fitting to extend 1/4" beyond the finished surface. The HydraChoice rough-in R50200 is to be used with models (T50010 or T50210) and spray heads (SH5000, SH5002, SH5003, or SH5005). https://www.deltafaucet.com/search-results?searchTerm=HydraChoice#resultPage=0&offset=0 Best regards, Edward
Answered by: Delta Faucet
Date published: 2019-03-16

good afternoon. in your installation instructions you recomend "balance loops". I'm wondering what will happen without them?

The homeowner wanted a 4 jet square layout with the on/off temp adjust valve and diverter valve in the center
Asked by: MICHAEL
Hi Michael, Thank you for your question. We recommend using balance loops to help ensure that each body spray gets an equal amount of pressure. Without the balance loops, some sprays may have better flow than others. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-02-08

the r50200

I have finished a shower install. And found the plumber never picked any body spay when doing install. The shower is tiled so I am wondering do you have to use this. Exact rough in. I believe he just has a 90` 1/2" elbow.
Asked by: jim
Dear Jim, Thank you for your question. Any of the Delta HydraChoice Body Spray Trim and Body Spray units will work with the Delta HydraChoice Body Spray Rough R50200. https://www.deltafaucet.com/search-results?searchTerm=HydraChoice Best regards, Tanya
Answered by: Tanya
Date published: 2017-03-04

Surface of the finished wall

Referring to the R50200 Installation Guide, is the surface of the finished wall referring to the back of the finished wall (backer board) or the front of the wall (tiled)? Also, what does the stud face referring to? The open wall width is 3-1/2" and I calculate that my finished wall thickness will be 7/8". I'm trying to calculate where to place the stringer back plate to mount the shower body spray.
Asked by: mxplea10
Hi Mxplea10, Thank you for your question! The finished wall the instructions is referring to is the tile. Also, the face of the stud is the very front of the stud. Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2016-03-29

I bought 50102-SS body sprays.  The plumber I’m using is saying I need these for the install.  Is this the correct part or is a 1/2” IPS male threaded connector only needed?

Asked by: Plumbnewb
Dear Plumbnewb, Thank you for your question. I will be happy to assist! Model 50102-SS connects directly to the 1/2" copper or iron galvanized tube behind the wall. R50200 is used with a different type of body spray. I have included the M&I for 50102-SS below, please refer to page 2. 50102 M&I - https://media.deltafaucet.com/MandI/60865%20Rev%20F.pdf Please contact us directly if you need further assistance. Best Regards, Kyra
Answered by: Delta7
Date published: 2020-09-30
  • y_2021, m_3, d_5, h_16CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.14
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_en_US, sid_R50200, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 62ms
  • questions, product
Mike and Hanna
Delta logo thumb

Need help with installation? Mike & Hannah are here to help! Get advice from the pros on everything from installation to product care.

Delta BiLT app
BiltLogo IntelligentInstructions Horizontal

Installation made easy. Download the free BILT app to access step-by-step 3D interactive instructions.

* Actual pricing may vary and is determined by the selling retailer/wholesaler/dealer.