Tub Spout - Pull-Down Diverter

Model#: RP17453PB

Download Image

RP17453PB is rated 3.5 out of 5 by 11.
  • y_2019, m_2, d_20, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_11
  • loc_en_US, sid_RP17453PB, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 72ms
  • Pull-down diverter adds convenience to your tub
  • Polished chrome finish adds a sleek touch to your bathroom
  • Backed by Delta Faucet’s Lifetime Limited Warranty
California Prop 65 WARNING
Finish: Polished Brass
List Price*: $94.15
Base Parts
List Price*: $94.15

  • Pull down to Divert
  • 6 1/8" total length
  • Sweat onto 1/2" C.W.T. or thread onto 1/2" IPS

Special Features

Product Support, Repair Parts & Technical Specifications

Installation Information

  • Spout Length: 5-1/4"
Rated 2 out of 5 by from Can’t take shower. Less than a year old and water spews everywhere when we try to pull the pull down diverted to take a shower.
Date published: 2018-12-24
Rated 1 out of 5 by from Lasted just under two years This spout lasted just under two years before failing. Once I pull down on the diverter, water spews everywhere with no pressure at all to the shower head. Very difficult to shower to say the lest.
Date published: 2018-10-19
Rated 1 out of 5 by from Both broke Got 2 of the spouts for my bathrooms. Both of them broke within a week of each other. The inner plastics piece just crack and broke and spews water everywhere. Makes it difficult to shower when the spout breaks suddenly on you.
Date published: 2018-08-09
Rated 5 out of 5 by from Great product. Best I have found on the market No requirement for an access panel behind the shower. Delta can be repaired from the front side , Faucet cartridges or the diverter. Fewer moving parts mean longer lasting.
Date published: 2017-10-13
Rated 1 out of 5 by from This product has failed us twice... Later in 2016 I wanted to take a shower and as I pulled the nozzle down, it started spewing out water.. once we removed it we found a crack inside of the spout and we had just replaced our old one probably in the summer of 2016. We have since replaced it again with the same product and just now (it is now May 6th 2017) it has cracked again. Perhaps it is just bad luck? Or maybe it's just made with extremely cheap materials but then sold for a steep price? I'm not sure but definitely would not recommend and quite disappointed.
Date published: 2017-05-06
Rated 5 out of 5 by from Easy to use I like the overall design and ease of use. The hidden quality of the pull down diverter is especially appealing. Very good and well made product.
Date published: 2016-05-05
Rated 4 out of 5 by from Almost Perfect (Which is what I expected) I ordered this item as a replacement of my existing tub spout. The order was processed and shipped very expeditiously; I received it within 3 business days. It was exactly what I needed (a direct replacement for what I had) and installed easily. Up to this point all was excellent; however when I tested it, it leaked a small amount of water from the spout when in showerhead flow mode. I expected a 100% flow rate for something that was brand new. Several weeks after installation, the leakage issue remains (the same as initially experienced, not better, no worse). My disappointment prevents me from giving your product a 5-star rating.
Date published: 2016-04-10
Rated 5 out of 5 by from Kind, Patient, and Specialized Staff. Phone technician was fantastic. He helped me find all of the products I needed and was very patient and kind. I received exactly what I was looking for. Thank you for having such specialized staff.
Date published: 2013-07-09
  • y_2019, m_2, d_20, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_11
  • loc_en_US, sid_RP17453PB, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 12ms

Do you have a pull-down diverter that just slips on over 1/2" copper pipe?

Would like polished brass. Thank you!!
Asked by: Papa Ron
Hi Papa Ron, Thank you for your question. Unfortunately, we do not make a Polished Brass pull-down diverter that slips onto 1/2" copper piping. Best Regards, Courtney
Answered by: DeltaFaucet12
Date published: 2016-06-01

What O ring is needed for the RP17453PB pull down diverter. I have a leak from the diverter behind the tiled wall.

Asked by: saggy floor girl
Hello Saggy Floor Girl, Thank you for your inquiry! The o-ring on the RP12307 adapter, that comes with the Pull-Down Diverter Tub Spout RP17453PB, is available as the RP1745. The o-ring is 15/16" ID x 1-1/8" OD x 3/32" thick. Please feel free to call, email, or message us on social, if there is anything else you need. Best regards, Tanya Phone: 1-800-345-3358 | Email: |
Answered by: Delta Faucet
Date published: 2019-01-02

What is the difference between the RP17453 & RP17454

Asked by: Jim
Hi Jim, Thank you for your question. The tub spouts are the same except for the materials used to make them. The RP17454 is metal, the RP17453 is non-metallic. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2013-12-12

The item RP17453 is fit for pipe protruding 3.5" from the wall?

Asked by: Raymond
Thank you for your question, Raymond! This tub spout will sweat onto a smooth copper pipe extending 2 - 4" from the finished wall, or thread onto a 1/2" IPS nipple extending 5/8 - 1 5/8" from the finished wall. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-06-10

Hello,  I am trying to replace the faucet in my tub,  But the brass fitting it screws onto is larger than all of the standard size one's.  When I measure the plastic thread hole in the old one, it measures 1 1/4" (inches)

Asked by: JJWeb
Thank you for your question, JJWeb! RP17453 connects by either sweating onto 1/2" C.W.T. (copper water tube) or threading onto 1/2" IPS (iron pipe size). If your previous tub spout was installed onto another manufacturers adapter, this will need to be removed before using this tub spout. Best regards, Edward
Answered by: DeltaFaucet234
Date published: 2018-05-22

what size o ring do i need for this part RP17453

Asked by: rick
Dear Rick, Thank you for your inquiry! The Delta Pull-Down Diverter Tub Spout RP17453 comes with an the RP1745 O-ring that measures 15/16" x 1/8" x 3/32". Best regards, Tanya
Answered by: Tanya
Date published: 2017-08-05

Does this the 17453 faucet have a matching escutcheon? I have a 1/4" gap between the base of the faucet and the tub that I am trying to cover.

Asked by: Dale
Thank you for your question. Delta Faucet model # RP17453 does not have a matching escutcheon. However, we do manufacture tub spouts that contain escutcheons that might work for your application. Both Delta Faucet models RP52148 and RP53419 have escutcheons.
Answered by: Delta
Date published: 2013-10-22

How long of a 1/2" pipe stub is needed for the adapter?

The distance from the wall to the end of the 1/2" copper pipe on my bathtub is 1 1/4". Is this long enough to use with the brass adapter that comes with this Delta tub spout? If not, what is the recommended way to install the spout? I looked on-line for detailed installation instructions, but could not find any.
Asked by: AW
Hi AW, Thank you for your question. You will need at a minimum 1-1/2" and preferably 1-3/4" of copper to solder on the adapter. The only other option is if you can solder on a 1/2" copper male adapter keeping your overall length to 1-1/4" at the maximum, 1/2" at the minimum and then threading the tub spout adapter on.
Answered by: DeltaFaucet2
Date published: 2013-10-30
  • y_2019, m_2, d_20, h_16CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_50
  • loc_en_US, sid_RP17453PB, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 67ms