Delta

Tub Spout - Pull-Down Diverter

Model#: RP17453SS

Download Image

RP17453SS is rated 3.3 out of 5 by 12.
  • y_2019, m_6, d_15, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_12
  • loc_en_US, sid_RP17453SS, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 45ms
  • REVIEWS, PRODUCT
  • Pull-down diverter adds convenience to your tub
  • Polished chrome finish adds a sleek touch to your bathroom
  • Backed by Delta Faucet’s Lifetime Limited Warranty
California Prop 65 WARNING
Finish: Stainless
List Price*: $94.15
Base Parts
RP17453SS
List Price*: $94.15

  • Pull down to Divert
  • 6 1/8" total length
  • Sweat onto 1/2" C.W.T. or thread onto 1/2" IPS

Special Features

Product Support, Repair Parts & Technical Specifications


Installation Information


  • Spout Length: 5-1/4"
Rated 2 out of 5 by from Broke too soon. Finished basement bath less than two years ago spews water everywhere.
Date published: 2019-04-11
Rated 2 out of 5 by from Can’t take shower. Less than a year old and water spews everywhere when we try to pull the pull down diverted to take a shower.
Date published: 2018-12-24
Rated 1 out of 5 by from Lasted just under two years This spout lasted just under two years before failing. Once I pull down on the diverter, water spews everywhere with no pressure at all to the shower head. Very difficult to shower to say the lest.
Date published: 2018-10-19
Rated 1 out of 5 by from Both broke Got 2 of the spouts for my bathrooms. Both of them broke within a week of each other. The inner plastics piece just crack and broke and spews water everywhere. Makes it difficult to shower when the spout breaks suddenly on you.
Date published: 2018-08-09
Rated 5 out of 5 by from Great product. Best I have found on the market No requirement for an access panel behind the shower. Delta can be repaired from the front side , Faucet cartridges or the diverter. Fewer moving parts mean longer lasting.
Date published: 2017-10-13
Rated 1 out of 5 by from This product has failed us twice... Later in 2016 I wanted to take a shower and as I pulled the nozzle down, it started spewing out water.. once we removed it we found a crack inside of the spout and we had just replaced our old one probably in the summer of 2016. We have since replaced it again with the same product and just now (it is now May 6th 2017) it has cracked again. Perhaps it is just bad luck? Or maybe it's just made with extremely cheap materials but then sold for a steep price? I'm not sure but definitely would not recommend and quite disappointed.
Date published: 2017-05-06
Rated 5 out of 5 by from Easy to use I like the overall design and ease of use. The hidden quality of the pull down diverter is especially appealing. Very good and well made product.
Date published: 2016-05-05
Rated 4 out of 5 by from Almost Perfect (Which is what I expected) I ordered this item as a replacement of my existing tub spout. The order was processed and shipped very expeditiously; I received it within 3 business days. It was exactly what I needed (a direct replacement for what I had) and installed easily. Up to this point all was excellent; however when I tested it, it leaked a small amount of water from the spout when in showerhead flow mode. I expected a 100% flow rate for something that was brand new. Several weeks after installation, the leakage issue remains (the same as initially experienced, not better, no worse). My disappointment prevents me from giving your product a 5-star rating.
Date published: 2016-04-10
  • y_2019, m_6, d_15, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_12
  • loc_en_US, sid_RP17453SS, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 13ms
  • REVIEWS, PRODUCT

we have a RP17453 in our bathroom.Guests at times can't figure out how to turn on the shower. When installed this came with a sticker to be installed on the spout where water flows into the tub. Can we get a replacement sticker from you?

Asked by: Michele
Hello Michele, Thank you for your question. The RP17829 and RP17472 are the stickers that inform others of how to use the RP17453. These stickers can be purchae from any local or online dealer that sells Delta products. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2019-05-04

What is the difference between the RP17453 & RP17454

Asked by: Jim
Hi Jim, Thank you for your question. The tub spouts are the same except for the materials used to make them. The RP17454 is metal, the RP17453 is non-metallic. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2013-12-12

The item RP17453 is fit for pipe protruding 3.5" from the wall?

Asked by: Raymond
Thank you for your question, Raymond! This tub spout will sweat onto a smooth copper pipe extending 2 - 4" from the finished wall, or thread onto a 1/2" IPS nipple extending 5/8 - 1 5/8" from the finished wall. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-06-10

Hello,  I am trying to replace the faucet in my tub,  But the brass fitting it screws onto is larger than all of the standard size one's.  When I measure the plastic thread hole in the old one, it measures 1 1/4" (inches)

Asked by: JJWeb
Thank you for your question, JJWeb! RP17453 connects by either sweating onto 1/2" C.W.T. (copper water tube) or threading onto 1/2" IPS (iron pipe size). If your previous tub spout was installed onto another manufacturers adapter, this will need to be removed before using this tub spout. Best regards, Edward
Answered by: DeltaFaucet234
Date published: 2018-05-22

what size o ring do i need for this part RP17453

Asked by: rick
Dear Rick, Thank you for your inquiry! The Delta Pull-Down Diverter Tub Spout RP17453 comes with an the RP1745 O-ring that measures 15/16" x 1/8" x 3/32". Best regards, Tanya
Answered by: Tanya
Date published: 2017-08-05

Does this the 17453 faucet have a matching escutcheon? I have a 1/4" gap between the base of the faucet and the tub that I am trying to cover.

Asked by: Dale
Thank you for your question. Delta Faucet model # RP17453 does not have a matching escutcheon. However, we do manufacture tub spouts that contain escutcheons that might work for your application. Both Delta Faucet models RP52148 and RP53419 have escutcheons.
Answered by: Delta
Date published: 2013-10-22

How long of a 1/2" pipe stub is needed for the adapter?

The distance from the wall to the end of the 1/2" copper pipe on my bathtub is 1 1/4". Is this long enough to use with the brass adapter that comes with this Delta tub spout? If not, what is the recommended way to install the spout? I looked on-line for detailed installation instructions, but could not find any.
Asked by: AW
Hi AW, Thank you for your question. You will need at a minimum 1-1/2" and preferably 1-3/4" of copper to solder on the adapter. The only other option is if you can solder on a 1/2" copper male adapter keeping your overall length to 1-1/4" at the maximum, 1/2" at the minimum and then threading the tub spout adapter on.
Answered by: DeltaFaucet2
Date published: 2013-10-30

do you sell 3/4 in. threaded diverters?

Asked by: steve
Hi Steve, Thank you for your question! All of our tub spouts have 1/2 In connections. Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2016-02-17

will the spout work for my situation explained below?

My 1/2" copper pipe extends exactly 4" from the wall and has threads on the end. threads are 1/2' long. will the spout thread onto the pipe and be tight against the wall and be facing down?
Asked by: Jack
Thank you for your question, Jack. The tub spout will thread onto a 1/2" pipe that extends 5/8" to 1 5/8" from the finished wall or sweat onto a 1/2" copper pipe that is 2" to 4". Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-11-24

I have an old Delta Tub spout that screwed on using this fitting will it fit on this?

Here is a photo of the old "stub" that is sweated on to a copper pipe. This is a 25 year old Delta 600 series tub set. I would like to fit a stainless steel tub spout on this without removing and replacing. Open to other spout models in stainless.
Asked by: PaulR
Thank you for your question. Delta Faucet model # RP17453SS can either be sweat onto a 1/2" copper pipe or threaded onto a 1/2" iron pipe. It does include an adapter assembly.
Answered by: Delta1
Date published: 2014-09-28

Does this replace an old 600 series pull down faucet without altering the copper plumbing?

"W e are replacing our tub fixtures to nickel or stainless (Delta 600 series). Our current pull down diverter faucet is 6" long, and looks like the drawing. When the spout is removed, the copper pipe comes out 3" with an o ring on the end. The screw fixture is about 1" from the wall. Will this spout fit directly on the current copper pipe as described, i.e. is this a direct oem replacement for the old spout or will it require changeing the copper pipe.
Asked by: Mike
Thank you for your question. Delta Faucet model # RP17453NN can be used on your current pipe. You should be able to remove the adapter from your new tub spout and screw it onto where the old one was placed.
Answered by: Delta
Date published: 2013-10-22

this model faucet has failed for the second time. 6 mo ago it leaked back past the o ring and threads and into the wall, damaging my ceiling. I replaced it with another delta. it just did it again. Is there another one with brass threads internally?

Asked by: Brian Shelton
Hi, Brian. Thank you for your question, and I am sorry to hear that you are experiencing a leak at your Delta tub spout. We do have another tub spout that works with the brass adapter. The part is RP19820. Here is a link to the unit on our website: https://www.deltafaucet.com/bathroom/product/RP19820 Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2018-01-31

Which model would you recommend to replace faucet # RP17453, if I do not need a diverter? I have one in my tub that is stuck in the down position, but I do not need a diverter because the shower is a separate stall and has its own water supply.

Asked by: Donna
Hi Donna, Thank you for your inquiry! We do not make a non diverter tub spout that is designed exactly like the RP17453 one. However, we do manufacture several different non-diverter spouts, please the link below. https://www.deltafaucet.com/search-results?searchTerm=non+diverter+spouts Best regards, Tanya
Answered by: Delta Faucet
Date published: 2018-09-06

Is there a oil bronze replacement spout for the RP17453 with the RP12307 adapter?

Asked by: Calvin Evanoff
Hi Calvin, Unfortunately we do not have a replacement spout in the oil rubbed bronze finish with an RP12307 adapter. We do have an alternate tub spout in Venetian Bronze which is similar that works with the RP12307 adapter. The model number is RP34357RB. http://www.deltafaucet.com/bath/details/rp34357rb.html?showPhotoGallery=false Best Regards, Rosanna
Answered by: Rosanna
Date published: 2016-07-17

Can I use RP17453 to replace a spout?

I have a 3-3/4" threaded iron nipple. Will I be able to install this RP17453 without cutting the pipe? If not what other Delta spout can I use instead? Thanks.
Asked by: Art
Hi Art, Thank you for your question. The adapter used on the RP17453 tub spout requires that the pipe nipple extend beyond the finished wall between 5/8" to 1-5/8". Our tub spouts like the model RP63157 that the nipple threads into the nose of the spout require 3-7/8" to 4" of pipe from the finished wall. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2015-03-04

I'm installing a new RP17453 (plastic) tub spout to replace our 16-year old one that just started leaking. Is it necessary to use teflon tape before screwing the plastic threaded part onto our copper pipe? Instructions don't say, but our old one didn't.

Asked by: lori
Hello Lori, Thank you for your inquiry! The Delta Pull-Down Diverter Tub spout RP17453 does not need any putty or tape with installing it on the brass adapter/pipe. Best regards, Tanya
Answered by: Tanya
Date published: 2018-09-24

Do you have a pull-down diverter that just slips on over 1/2" copper pipe?

Would like polished brass. Thank you!!
Asked by: Papa Ron
Hi Papa Ron, Thank you for your question. Unfortunately, we do not make a Polished Brass pull-down diverter that slips onto 1/2" copper piping. Best Regards, Courtney
Answered by: DeltaFaucet12
Date published: 2016-06-01

What O ring is needed for the RP17453PB pull down diverter. I have a leak from the diverter behind the tiled wall.

Asked by: saggy floor girl
Hello Saggy Floor Girl, Thank you for your inquiry! The o-ring on the RP12307 adapter, that comes with the Pull-Down Diverter Tub Spout RP17453PB, is available as the RP1745. The o-ring is 15/16" ID x 1-1/8" OD x 3/32" thick. Please feel free to call, email, or message us on social, if there is anything else you need. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP1745 Best regards, Tanya Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com |
Answered by: Delta Faucet
Date published: 2019-01-02

Can I replace the spout by itself or do i have to replace the entire set?

I laid the toilet brush across my tub spout to dry out and it has tarnished the finish (see photos). My landlord says the spout, handle and shower head all have to be replaced and a plumber has to do it. I think the spout should be relatively simple to replace. Can I just purchase a replacement spout and install it without having to go into the entire shower set-up? Or, is there a product I can purchase that will clean the tarnish/discoloration and return it to "normal"? As you can see from the photos, the water is hard and the fixtures are already spotted with mineral deposits. Help! Please?!!! Thank you sooo much!
Asked by: Amanda
Thank you for your questions. We would recommend replacing just the tub spout. Delta Faucet part #RP17453 can be purchased and installed (instructions are included with the packaging).
Answered by: Delta1
Date published: 2013-10-22

Hi, is the Delta RP17454 interchangeable with the RP17453 and what are the benefits of each? Thanks

Asked by: Rob
Thank you for your question. Delta Faucet part # RP17454 and Delta Faucet part # RP17453 are interchangeable. The difference between the two is that RP17454 is metal and RP17453 is non-metallic. It is a personal preference for the consumer to pick one.
Answered by: Delta1
Date published: 2013-10-22

How do I adjust the water temp after installation

Asked by: Jo
Hello Jo, Thank you for your question. It sounds like the Rotational Limit Stop on your cartridge needs to be adjusted. I have included the link to our How-To video. https://www.deltafaucet.com/cms/render/live/en/sites/delta/home/video-gallery/video-page.html?videoId=n2_uZ7wgV1I Best Regards, Courtney
Answered by: DeltaFaucet12
Date published: 2016-11-09

I'm unclear on whether or not this will fit onto a 4" long threaded 1/2" pipe or not or if it will require a shorter pipe to install to

Asked by: Morad
Thank you for your question. Delta Faucet model # RP17453 uses an adapter model RP12307. When using the adapter, the distance from the end of the pipe to the finished wall is to be from 5/8"-1 5/8".
Answered by: Delta1
Date published: 2013-10-22

Is this item compatble with the adapter from my 18 year old Delta pull down spout? I am hoping to replace the spout without using a torch.

Asked by: busted spout
Hi, Thank you for your question. This diverter tub spout assembly does work with and come with a RP12307 adapter. Best Regards, Rosanna
Answered by: Rosanna
Date published: 2018-03-13

I have a 1" threaded female adapter that is sodered onto the normal 1/2" threaded copper pipe coming from the wall. I am looking for an easy fix...

From my research I have found that the delta 17453 may work with the included adapter. It sounds like the adapter that comes with this is like the one that is sodered onto my existing pipe. Does this adapter easily come off of the 17453 spout so I can just thread in the 17453 onto my existing 1" adapter?
Asked by: Chris
Hi Chris, Thank you for your question! This tub spout comes with the RP12307 adapter. If you already have this adapter installed, simply unscrew the included adapter and screw on the spout. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-06-10

what spouts will replace my 1400 series?

I have a rp12307 adaptor sticking out of the wall from when the first delta was put in. Alot of the spouts I have looked at only have thread out at the end of the spout about 4" further out.
Asked by: Jeff
Hi Jeff, Thank you for your question! A majority of our tub spouts will fit the RP12307 adapter. The basic ones are the RP17453 and RP5834. Below is a link to browse our tub spouts. In order to see if it will work on our website, refer to the product features tab and make sure it says that it will thread onto 1/2" IPS nipple and that it will sweat onto 1/2" C.W.T. http://www.deltafaucet.com/bath/showering-components/filter-results.html?finish=cr&sort=pricehighlow&type=type-showercomp-tubspouts&function=bath-showering-components Best Regards, Daniel
Answered by: DeltaFaucet3
Date published: 2016-01-18

can you order the insides of spout.

Asked by: scott fox
Hi, Scott. Thank you for your question. The internal plastic piece for the Delta RP17453 Diverter Tub Spout assembly is not available on it's own. If the part is needed, the whole tub spout would need to be replaced. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2019-05-04

Do you make a spout with a pull down diverter and threads into the nose

I have a 4 inch nipple i do not want to change. I also want the positive sealing the pull down divertor provides
Asked by: Billi
Hi Bill, Thank you for your question. We do not offer a pull down tub spout diverter that will accept a pipe nipple into the nose of the spout. The pull down spouts use or RP12307 tub spout adapter that threads onto a pipe 5/8" to 1-5/8" from the finished wall. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2015-04-30

Can tub spout and diverter RP17453 be sweated on 1/2" copper tubing?

Asked by: Jerry
Thank you for your question. Delta Faucet model # RP17453 can either be sweated onto a 1/2" copper pipe or threaded onto a 1/2" iron pipe.
Answered by: Delta1
Date published: 2013-10-22

Replacement diverter for 4" threaded pipe

What Delta replacement tub diverter spout do I need to fit onto a 1/2 (inside diameter) copper pipe that protrudes exactly 4" from the wall? At the end of the pipe is a soldered threaded fitting on which the diverter screws directly. The combined distance from the wall of the pipe and the fitting is 4" exactly. The outside diameter of the threaded fitting looks to be about 3/4 inch. The original diverter that must be replaced is chrome metal (not plastic) and has a pull up knob on it. I don't want to cut the pipe or resolder a threaded fitting to a shorter length. thanks in advance.
Asked by: asm
Hi ASM, Thank you for your question. Our RP61357 is a metal diverter tub spout that will thread onto a pipe that is 3-7/8"-4" long. The pipe will thread into the nose of the spout. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2015-12-06

Delta Tub Spout - Pull down diverter

My delta pull down diverter is leaking. Can I simply replace it with a new RP17453 and keep the old adapter in place or do I need to install a new adapter as well?
Asked by: Sam
Hi Sam, Thank you for your question. You can take a new RP17453 tub spout and screw it on to your existing tub spout adapter. You will not need to install the new adapter. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2014-09-05
  • y_2019, m_6, d_15, h_24CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.12
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_55
  • loc_en_US, sid_RP17453SS, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 81ms
  • QUESTIONS, PRODUCT