Will this work on a a 2-1/4" copper stub from the wall no threads? Also can I get a link to the instructions before purchasing to make sure this will work?
Thank you for your question, Matt83! The tub spout RP19820 is a slip on tub spout. This installs on a 1/2" C.W.T. (copper water tube). If it is necessary to cut the
copper tube, the end must be chamfered free of burrs to prevent cutting or nicking O-ring inside the spout. This information can be found on page 5 of the installation manual and I will include a link below.
Best regards, Edward
Date published: 2018-07-02
What is the material?
Is this plastic or metal? How does it attach?
Thank you for your inquiry! The Delta Faucet Tub spout RP19820 is a non metallic slip-on spout, that comes with the RP33794 adapter, for a 1/2 inch copper pipe installation.
Date published: 2017-02-13
Will this work to replace my existing tub spout?
I have a delta tub spout in my house, which was built in the late 1990's. The plumbing is a copper stub with threads at the end and soldered into it is a brass fitting. The tub spout has a plastic piece that goes over the brass fitting and then the tub spout itself turns into the plastic piece.
The copper stub is too small to do anything with it, so I need to replace the tub spout with the exact same type. Will this tub spout work?
Thank you for your question. Delta Faucet model # RP19820 is a slip-on spout for a 1/2 inch copper pipe. As long as your old spout is a slip-on spout, then this new one will work.
Date published: 2015-05-13