Delta

Tub Spout - Pull-Up Diverter

Model#: RP48718

Download Image

  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 65ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
California Prop 65 WARNING
Finish: Chrome
List Price*: $73.35
Base Parts
RP48718
List Price*: $73.35

  • Pull up to divert
  • 6" total length
  • Slip onto 1/2" CWT

Product Support, Repair Parts & Technical Specifications


Installation Information


  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 10ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

Copper pipe length for RP64721 tub spout

To install a slip on tub spout RP64721 what should the length be of the copper pipe coming out of the wall? Right now it is too long so I need to cut it (5"), but I put the spout on to try it and it seemed like it stopped after about an inch, seems like it should go further into the spout to me.
Asked by: Derek
Hi Derek, Thank you for your question. When installing the RP64721 slip-on tub spout, the tubing should be cut 1 ½ – 2 ¾” from the finished wall with a tubing cutter. Prior to inserting the tube into the adapter, the end should be chamfered free of burrs (on outside of the tube) to prevent cutting or nicking of o-ring. Do not over-tighten set screw. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2018-10-01

directions for soldering adapter to copper pipe unclear where to solder adapter

Asked by: ken
Thank you for your question. When installing Delta Faucet model # RP48718, the tubing should be cut 2 3/4" - 4 1/4" from the finished wall with a tubing cutter. Prior to inserting the tube into the adapter, the end should be chamfered free of burrs on the outside of the tube to prevent cutting or nicking of O-ring.
Answered by: Delta1
Date published: 2013-10-22

does the rp48718 just push on or push so far and then screws on? thanks.

Asked by: jackleg
Hi, Jackleg! Thank you for your question. The RP48718 slips onto the 1/2" c.w.t. and then tightened by a set screw on the bottom of the tub spout assembly. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2018-02-24

How long does the 1/2 copper pipe from the wall have to be?

replacement part # for the Tub Spout RP48718
Asked by: Mat
Thank you for your question. When using the Delta Faucet part # RP48718, the copper pipe should be from 5/8 to 1 5/8 inches from the wall. That measurement is from the wall to the end of the pipe threads.
Answered by: Delta1
Date published: 2013-10-22

Can you do an iron pipe installation with this spout? If so, how far should the threaded pipe nipple extend from the finished wall?

Also, if you are able to do an iron pipe installation, how do you remove the parts for the copper pipe installation? I have tried to remove the parts but i'm afraid i'm going to break something. Should the copper pipe installation parts just screw back out? Any help or suggestions would be greatly appreciated.
Asked by: BJB
Thank you for your question. Delta Faucet model # RP48718 can only be used as a slip on to a copper pipe. It can not be used with an iron pipe.
Answered by: Delta1
Date published: 2013-10-22

Need 1" SAE threads - does this spout have it.

Asked by: Anu
Thank you for your question. Delta Faucet model # RP48718 uses 1/2 inch threads.
Answered by: Delta1
Date published: 2013-10-22

The lenght of the copper pipe from the tile only measure 3/4 of an inch. In one of your answer, you said that 5/8 of an inch was sufficient.

in another answer yo say that the pipe should be cut at 2 3/4 inches from the wall?? Bottom line, I don't want to call plumber to extend my pipe from the wall, would it fit on my short pipe? thanks for your help.
Asked by: marc
Hi Marc, Thank you for your question. The copper tube should be at least 2-3/4" long and no longer than 4-1/4" to work with the model RP48718 spout. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2013-12-23

If order Delta Tub Spout - Pull-Up Diverter (Model #:RP48718SS) will it work with Model #142910-SS?

I purchased set Model #142910-SS (shower head and valve only) around 2010-2011. We have now decided to do a bath/shower combo rather than a shower only. Therefore, we now require the tub spout. A few questions: 1. If we order Delta Tub Spout - Pull-Up Diverter (Model #:RP48718SS) as found from parent set Model #144910-SS, will it work with the original ordered set Model #142910-SS? 2. Do we need any other parts to make the bath tub fill functionality work? 3. Does Delta Tub Spout - Pull-Up Diverter (Model #:RP48718SS) match the original set Model #142910-SS?
Asked by: Philip Dufrene
Hi Philip Dufrene, Thank you for your question! The RP48718SS tub spout will work with the 142910-SS shower trim. The unit should of included the standard R10000-UN shower valve which has a connection for a tub spout. Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2016-07-25
  • y_2018, m_12, d_14, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_12
  • loc_en_US, sid_RP48718, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 17ms
  • QUESTIONS, PRODUCT