Discontinued
- Pull down to divert
- 6 1/4" total length
- Sweat onto 1/2" CWT or thread onto 1/2" IPS nipple
Special Features
Brilliance® Finish
Installation Information
I see this is discontinued, what replacement part is recommended?
Hi Nancy, Thank you for your question!
The RP49758 pull down diverter tub spout has been replaced with the RP53419 pull up diverter tub spout.
Best regards,
Brandis
Date published: 2018-01-07
How do I remove the connector from the spout?
I just received a replacement spout but the connector is attached to the inside of the spout. The connector from my previous spout is soldered onto the pipe.
How do I unthread the connector from the replacement spout? I've tried twisting it with my finger but I ended up with cuts on my fingers instead.
Much thanks.
Hi travelrookie, Thank you for your question. Since you will not be using the adapter, try using a pair of pliers to grab the lip at the end of the adapter to loosen the part. You will have the pliers on the threaded inside portion and what will grab on the outside. The adapter will unscrew counter-clockwise.
Thanks,
Dave
Date published: 2014-01-30
Is this Made in the USA?
I am interested in this spout. Is it made in the USA? I only buy USA made products
Thank you for your question. We manufacture Delta faucets in our plant facilities in Greensburg, Indiana; Jackson, Tennessee; London, Ontario, CA (and Panyu, China). As a global manufacturer, we also source and assemble a number of parts around the world. No matter where in the world our products are sourced, manufactured or assembled, they are built to Delta Faucet Company’s exacting specifications and are quality tested to ensure long-lasting performance. The location information on the back of the packaging will tell you where your specific faucet model was made.
Date published: 2016-11-20
