Addison

Tub Spout - Pull-Up Diverter

Download Image

RP61269SS is rated 2.0 out of 5 by 1.
  • y_2018, m_10, d_16, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_RP61269SS, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 222ms
  • REVIEWS, PRODUCT
California Prop 65 WARNING
Finish: Stainless
List Price*: $133.15
Base Parts
RP61269SS
List Price*: $133.15

  • Pull up to divert
  • 7 1/2' total length
  • Sweat onto 1/2" CWT - 1/4" to 1" from wall surface
  • Thread onto 1/2" IPS nipple 5/8" to 1 5/8" from wall surface

Special Features

Product Support, Repair Parts & Technical Specifications


Installation Information


Rated 2 out of 5 by from It's Plastic!!! While the product is beautiful and matches perfectly with Delta's Addison Collection, the tub spout is a cheap version of the real thing. It's made of plastic and can only be cleaned with mild soap and water. Especially in a bathtub where tile spray and cleaners splatter and can ruin the plastic chrome finish it's very likely I will have to buy another one down the line.
Date published: 2011-01-24
  • y_2018, m_10, d_16, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_RP61269SS, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 31ms
  • REVIEWS, PRODUCT

Is the stainless steel spout metallic or non-metallic?

Asked by: Chris
Hi Chris, Thank you for your question. The spout is non-metallic. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2018-02-01

adapter

Does this fit with adapter RP12307?
Asked by: phil
Hi Phil, Thanks for your question! This tub spout uses the RP12307 adapter. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2016-07-07

Does the adapter need to be soldered on both ends or just the end that faces the tub? The other end is close to the wall and difficult to access.

Asked by: WeekendDIY
Hi WeekendDIY, Thank you for your question. The RP12307 tub spout adapter that comes with the model RP61269 tub spout will sweat on the copper pipe at the end of the adapter under the o-ring which is away from the wall. Make sure to remove the o-ring before sweating the fitting. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2015-02-02

Should the adapter be against wall for copper sweat installation?

The instruction doesn't explain if I need to install the adapter against wall or away from it. The picture shows some slack between the wall and the adapter, but it doesn't explain how far either. And also how long the copper pipe should be from the wall?
Asked by: S. Jin
Thank you for your question. When sweating on Delta Faucet model # RP61269, you will cut the tubing 2"-4" from the finished wall. After brazing, the adapter will be 1/4"-1/2" from the finished wall. When brazing on the adapter, remove the external o-ring first and cool the brass down prior to re-installing the o-ring. If desired, tubing may be cut off just beyond or flush with the end of the adapter. Thanks. Jody
Answered by: Delta1
Date published: 2013-10-22
  • y_2018, m_10, d_16, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_RP61269SS, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 207ms
  • QUESTIONS, PRODUCT