Shower Head

Model#: RP62171BN
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 82ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

Download Image

Compare Favorite Add To A Project View my Items image/svg+xml Print
Finish: Brushed Nickel
List Price (US $):


  • Installs in minutes
  • Spray settings include: Full Body spray, Massaging spray
  • 2.00 gpm @ 80 psi, 7.6 L/min @ 550 kPa
  • Water-efficient showers help you conserve water and protect one of Earth’s most valuable natural resources—without compromising performance

Special Features

Product Support, Repair Parts & Technical Specifications

Installation Information

  • Flow Rate: 2.00 gpm @ 80 psi, 7.6 L/min @ 550 kPa
  • Spray Settings: Full Body Spray
  • Massaging Spray
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 13ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

Water trickles out of the shower head when the pull-up in the faucet has not been pulled up.

Asked by: Dick
Hi Dick, We are sorry that you are experiencing a problem with your faucet. Most likely, you are experiencing "shower-rise" where the water can’t get out of the spout as fast as it flows through the valve. This causes the water to back up and come out the shower head. There can be one of several reasons for this: The valve could be upside down The length from the valve to the tub spout is outside of the 8" to 18" rule There is more than one 90-degree angle Something other than copper or galvanized pipe was used going to the spout The most common reason is that there is something restricting the water flow to the spout, e.g. solder or something lodged in the pipe. Something is impeding the flow of water to the spout and causing it to back up and go out the shower head. If this is the cause of shower-rise it is possible to remove the blockage by removing the tub spout; then, feeding a plumber’s snake or a speedometer cable up through the tub drop. The act of feeding it causes it to twirl and loosen the blockage. Be sure to flush the valve before reinstalling the tub spout. Be sure to check the tub spout itself for blockage. If none of these help, you may need to call a plumber. After the shower has been installed and the wall has been closed, there is little that can be done to remedy this situation yourself. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2014-12-10

Is the RP6217OB assembled in USA ? and is the supply fitting plastic or Metal? or

Purchased and my pre purchase data states built in US !
Asked by: Tom
Hi Tom, Thank you for your question. We manufacture Delta faucets in our plant facilities in Greensburg, Indiana; Jackson, Tennessee; London, Ontario, CA (and Panyu, China). As a global manufacturer, we also source and assemble a number of parts around the world. No matter where in the world our products are sourced, manufactured or assembled, they are built to Delta Faucet Company’s exacting specifications and are quality tested to ensure long-lasting performance. The location information on the back of the box will tell you where your specific faucet model was made. The fitting that screws the showerhead onto the shower arm is metal. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2014-06-19
  • y_2018, m_3, d_16, h_1CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_RP62171BN, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 14ms