Foundations®

Tub Spout - Pull-Up Diverter

Download Image

RP64721OB is rated 5.0 out of 5 by 3.
  • y_2018, m_12, d_14, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_RP64721OB, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 13ms
  • REVIEWS, PRODUCT
Finish: Oil Bronze
List Price*: $71.15
Base Parts
RP64721OB
List Price*: $71.15

Product Support, Repair Parts & Technical Specifications


Installation Information


Rated 5 out of 5 by from Great Buy This was the best purchase and just what we were looking for. Couldn't fine this in any big box stores in our area but found it on this site. Contractor put a tub spout in that was too short so Build.com had what we needed. Can't go wrong. Thanks [This review was collected as part of a promotion.]
Date published: 2018-02-03
Rated 5 out of 5 by from Classy and solid brass I wanted solid brass and this faucet is a tremendous value. I bought a long one so that if you want to wash your hair under the faucet, it would reach out far enough for you to stick your head under it. We are very happy with it
Date published: 2016-12-07
Rated 5 out of 5 by from I was just what I wanted This spout was just perfect. It arrived very quickly and the spout was easy to order from the web site
Date published: 2016-09-13
  • y_2018, m_12, d_14, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_RP64721OB, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 11ms
  • REVIEWS, PRODUCT

Is there a oil rubbed bronze or Venetian bronze spout that will work on a rp12307 adapter? Thanks

Asked by: 67Cougar
Thank you for your question, 67Cougar! Many of our Delta tub spouts work with this RP12703 adapter, such as the RP51303, RP34357, RP52148, etc. Please click the link below to browse our selection of tub spouts. On the product details page it will list the installation type. If the spout works with this adapter, the "Product Features & Benefits" tab show that it can "Sweat onto 1/2″ C.W.T." and "Thread onto 1/2″ IPS". http://www.deltafaucet.com/bath/showering-components/filter-results.html?sort=pricehighlow&type=type-showercomp-tubspouts&function=bath-showering-components&page=2&count=15 Best regards, Tanya
Answered by: Tanya
Date published: 2018-03-10

IS THERE A REPLACEMENT ORB TUB SPOUT WITH DIVERTER THAT IS THREDED IN THE NOSE???

Asked by: HIEDI
Hi Hiedi, Thank you for your question. The RP63157OB is our diverter tub spout in oil rubbed bronze that is threaded in the nose to screw onto 1/2" pipe threads. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2017-01-27

New House - Spout diverter defective

We moved into a new build and did not discover the bath tub spout diverter was bad until we tried to give our baby a bath and got soaked as the water flow leaked up out the shower head. Is there any warranty associated with new, defective parts?
Asked by: Kate
Hi Kate, Thank you for your question.Most likely, you are experiencing "shower-rise" where the water can’t get out of the spout as fast as it flows through the valve. This causes the water to back up and come out the shower head. There can be one of several reasons for this: The valve could be upside down The length from the valve to the tub spout is outside of the 8" to 18" rule There is more than one 90-degree angle Something other than copper or galvanized pipe was used going to the spout The most common reason is that there is something restricting the water flow to the spout, e.g. solder or something lodged in the pipe. Something is impeding the flow of water to the spout and causing it to back up and go out the shower head. If this is the cause of shower-rise it is possible to remove the blockage by removing the tub spout; then, feeding a plumber’s snake or a speedometer cable up through the tub drop. The act of feeding it causes it to twirl and loosen the blockage. Be sure to flush the valve before reinstalling the tub spout. Be sure to check the tub spout itself for blockage. If none of these help, you may need to call a plumber. After the shower has been installed and the wall has been closed, there is little that can be done to remedy this situation yourself. Thanks, Dave Read more: http://www.deltafaucet.com/customersupport/faq/showers/index.html#ixzz2lsUElemAhank you for your question.
Answered by: DeltaFaucet2
Date published: 2017-12-20

I need a tub spout with a diverter where the pipe extends 5-6 inches from the wall and is threaded at the nose

Asked by: pastor
Hi pastor, Thank you for your question! Unfortunately, our tub spouts that thread into the nose require a pipe that is 3 7/8 – 4” in length. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2016-02-23

Will this screw onto a 1 inch threaded adaptor? Does it screw on at the base?

Asked by: Prli
Prli, Thank you for your question. This faucet can slip onto 1/2" copper pipe or thread onto 1/2" IPS. It does not use a 1" adapter. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-10-24

Sweat On Installation

How far from the wall does the copper tubing need to protrude? Thanks
Asked by: khb33
Hi kbh33, Thank you for your question. When installing the RP64721 slip-on tub spout, the tubing should be cut 1 ½ – 2 ¾” from the finished wall. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2014-06-03

How does the tub spout RP64721SS slip on adapt to 1/2 pipe thread attachment?

Asked by: dumber 55
Thank you for your question, dumber 55! This tub spout can either be installed as a slip-on to 1/2" copper pipe and held on with a set screw or threaded directly onto 1/2" IPS. The spout includes a threaded adapter however this can be removed if it is not needed. Further information on installing this tub spout can be found in the Maintenance and Installation manual on page 5. https://media.deltafaucet.com/MandI/68881%20Rev%20M.pdf Best regards, Edward
Answered by: Delta Faucet
Date published: 2018-11-11

is this metal or plastic/acrylic?

Asked by: caroline
Thank you for your question, Caroline! The RP64721 tub spout is metallic. Best regards, Edward
Answered by: Delta Faucet
Date published: 2018-11-04
  • y_2018, m_12, d_14, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_16
  • loc_en_US, sid_RP64721OB, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 11ms
  • QUESTIONS, PRODUCT