Bath Waste Assembly
Delta
Model#: RP693PT
Delta Bath Waste Assembly is rated
out of
5 by
3.
Discontinued
Compare
Favorite
Add To A Project
View my Items
Print
Finish: Aged Pewter
Finish: Aged Pewter
List Price (US $):
$151.50
- Toe-operated drain mechanism for tub fill
- 13-1/2" maximum vertical adjustment
- 7-3/4" maximum horizontal adjustment
- Solid brass construction ensures quality and reliability
Installation Information
Rated 5 out of
5
by
Katie29 from
Looks great!
This part works great, simple to install, and makes my bathroom look more updated.
Date published: 2018-03-03
Rated 5 out of
5
by
Jimmy Q from
Great Product
Just what I was looking for! Looks great in my new tub!
Date published: 2015-07-13
Rated 4 out of
5
by
hotrod from
Nice quality with issues
The overall quality of the product is great but I have a few issues with it. The first issue is the beveled gasket is so thick that it cannot be tightened down on my tub to seal it. Between the surface of my tub and the overflow fitting is perfectly parallel and doesn't require a beveled gasket. I need a flat gasket or at least a beveled one that is one third as thick as the one provided in the kit. The second and most import issue is the overflow pipe is too short. The website shows a maximum of 13 1/2 inch max vertical adjustment. The website should explain the measurement can't be more than that from the drain to the top of the overflow hole. My new tub is not deep but it needs to be about two inches longer. The old original brass drain from the old steel tub is 14 1/2 inches long and the new delta is only 12 inches. It seems that for a kit costing over $100 dollars that there would be two overflow gaskets and a overflow tube that is a couple inches longer and could be cut to fit.
Date published: 2015-02-01
Is the actual drain pipe 1 1/4" or 1 1/2"? i.e. what size is the tail piece that goes into the trap?
Hi Vaughan,
Thank you for your question! The tail piece is 1 1/2".
Best regards,
Jon
Date published: 2016-09-01
Is this a 1 1/2" or 1 1/4" drain?
Hi Vaughan,
Thank you for your question. This drain requires a 1 5/8" minimum drain hole. The flange is 1 1/2".
Technical Specifications:
https://media.deltafaucet.com/SpecSheet/DSP-B-RP293_Rev_B.pdf
Best regards,
Jon
Date published: 2016-08-29
Trim only
I'm replacing the trim only. I don't need the entire waste assembly. Can I purchase just a trim set? If so, part number please.
Hi Iherring, Thank you for your question!
The RP693 does not come as a trim only. However, you can order only the parts needed. Below is the parts diagram.
http://www.deltafaucet.com/customersupport/documentation/rp693rb.html?document=pd&fromDetailArea=bath&documentIndex=0#flashWrapper
Best regards, Brandis
Date published: 2016-02-12
When will this be available?
I've noticed that the shipping date had been pushed back twice and I'm in the middle of a remodel and need this assembly asap. Thank you very much.
Thank you for your question. We do apologize that you have been waiting for your part for so long. We have been having some supplier issues for this model and are waiting on components in order to manufacture the part. Unfortunately there is nothing I can send you in the mean time to get you through until the real peice comes in. Hopefully we will get the peices in soon.
Date published: 2013-10-22
Will it fit KOHLER Villager Bath?
Thank you for your question. Delta Faucet model # RP693SS has a maximum vertical adjustment of 13 1/2" and a maximum horizontal adjustment of 7 1/2." You will need to check with Kohler to see if this will meet the specifications.
Date published: 2013-10-22
