HydraChoice® Body Spray System
HydraChoice® Body Spray - H2Okinetic® Massaging Spray Head
Model#: SH5005-SS
- Valve is not included, must purchase separately
- Featuring Delta H2Okinetic Technology for 3X the coverage
- Backed by Delta Faucet’s Lifetime Limited Warranty
List Price*:
$28.80
H2Okinetic® Technology
Brilliance® Finish
Installation Information
- Spray Settings: H2Okinetic® Spray
Rated 1 out of
5
by
Lazy S from
Disappointed!!
Agree with review already posted. Except, I doubt it would work well even on a paper product. Adequate water flow; but NO massage action at all. Just a stream of water.
Looks great. But, where is the beef?? My last two homes were entirely Delta. Now, I am not so sure that loyalty will folllow to the next home.
Date published: 2018-12-06
What is the difference between the massaging and invigorating sprayheads?
Considering placing these sprays in my master bath shower renovation. I'd like to know what the difference is. I can guess on the touch clean and the soothing.
Hi Calisity, Thank you for your question. The soothing head offers a gentle wave pattern, the massaging head offers waves of water that converge in a hydro massage, the invigorating head uses forceful streams of water, and the touch clean is a full spray pattern.
Thanks,
Dave
Date published: 2014-10-06
What size pipe should be feeding the valves? We have 1/2 inch and there is not enough pressure to feel a massage, it just feels like a horizontal shower spray, very disappointing.
Hi, Bluetrout!
Thank you for your question. The Delta SH5005-SS body spray requires a 1/2"-14 NPT inlet to water supplies.
Best Regards,
Rosanna
Date published: 2018-12-14
I currently have shower jets 50100, I am looking to replace as I am looking for more of a massage versus hard spray. Can I use the existing rough in plumbing for this model if I was to leave the Hydro Spray (SH5005) in the extended position?
Hello smontag212,
Thank you for your question. Unfortunately, this will not work with the existing plumbing for the 50100 body spray. HydraChoice Spray Heads require an R50200 Rough and a HydraChoice Trim such as the T50010 or T50210.
https://www.deltafaucet.com/bathroom/product/R50200
https://www.deltafaucet.com/search-results?searchTerm=hydrachoice+trim
Best regards,
Jon
Date published: 2018-03-26
How far does the water shoot out from body jet Hydro Choice Body Choice System with SH5005?
Hi Shebra1979,
Thank you for your question. The distance that the water shoots out from the Delta HydraChoice H2Okinetic Body Spray would usually depend on the water pressure used. For instance, at 60 PSI this body spray will spray 3 feet before dropping off significantly.
https://www.deltafaucet.com/design-innovation/innovations/shower/hydrachoice-body-sprays#
Best regards,
Tanya
Date published: 2018-04-16
The sprays pop out when water is turned on with the pressure. After the water is turned off are the sprays supposed to go back in by themselves? Ours are not!
Thank you for your question, cd4osu! The spray head will stay in the same position when the water is turned off. You can leave it in this position or press it back into the spray body.
Best regards, Edward
Date published: 2019-02-03
Spray Head SH5005 extends when water turned on and can be adjusted in any direction. Will it stay in set position once water turned off ?
Hi Val,
Thank you for your question. The spray head will stay in the same position when the water is turned off. You can leave it in this position or press it back into the spray body.
Please click the link below for more information about our HydraChoice body sprays.
http://www.deltafaucet.com/shopping-tools/research/video-gallery/video.html?v=5vMMzIM5xok&cat=
Best regards,
Jon
Date published: 2016-05-17
Are the Delta and Brizo roughins and spray heads exactly the same? The Deltas are slightly less expensive.
Hi, dm!
Thank you for your question. The parts for both Delta and Brizo are the same and can be interchangeable, however prices may vary from brand to brand.
Best Regards,
Rosanna
Date published: 2017-10-06
What water pressure or GPM is needed for 4 of these heads?
Jeff L,
Thank you for your question! This unit is designed to run at 1.0 GPM. The flow rate may be reduced at pressures lower than 40 PSI.
Best regards,
Jon
Date published: 2018-01-10
More Product Options
Explore options to create the perfect product to fit your needs and design style.Featured Accessories
