I'd like to change the knob to a lever handle like model T13420. Is this possible? What parts do I need?
I have a clear acrylic knob (model T13422) and would like to update the look to single lever handle of a similar model. Assuming it is possible, what parts do I need to make the conversion?
It appears I would need the H79 handle. Would I need anything else?
Thank you for your question. The 13 or 14 series trim unit will allow you to change from a knob to a lever handle without any additional parts. You can use any H7_ handle, including the H79.
Date published: 2016-04-19
I have a T13422 fixture and would like to change the trim to a brushed metal look, is this possible?
Hi Steve, Thank you for your question. If your T13422 tub/shower faucet was installed after February 2006, any of our current trims will work with your existing rough in valve. If the faucet is older than February 2006 you will only be able to use the current 13/14 series trims to update your faucet.
Date published: 2014-08-18
I recently had an R1000-UNBX shower body installed together with a T13422 trim kit.
However, I would like to be able to control both water temperature and volume in our shower. Which would be the most economical fixture with which to replace the T13422? Would it require much skilled labor to make the replacement?
Thanks for your help.
- Jim Goulder
Thank you for your question. Because you have installed Delta Faucet model # R10000-UNBX, all you have to do is put on a new trim kit. Only the pieces on the outside of the wall will need replaced. Since you would like to control the volume and the temperature, you will need a 1700 series trim. We have several styles available so as long as the model starts with T17 you will find what you are looking for.
Date published: 2013-10-22