Pressure Balance Valve
The ARA- T14267 model doesn't allow for enough hot water to flow through the fixture. Is there a way to remove the pressure balance valve to create a free flow of hot water???
Thank you for your question! To get more water, please try adjusting the Rotational Limit Stop.
We do not advise to remove or modify the pressure balance mechanism.
Date published: 2016-09-15
What are the required parts such as rough-in to make this system work properly?
For the Ara 14 Series Shower Trim - T14267
Hi Khoudia, Thank you for your question. The T14267 shower trim needs our R10000 multichoice universal rough to make a complete faucet. For a shower only application you can use the model R10000-UNBXHF, or the R10000-UNWSHF.
The R10000-UNSWHF includes screwdriver stops that allow you to shut the water off at the faucet instead of turning off the water to the whole house if you need to repair or do maintenance on the faucet.
Date published: 2015-02-23
can the multi choice valve be used for a wand instead of tub
I have a shower (no tub) if I use your mulit choice valve, can I use it for a shower head and a wand on a bar instead of the tub fill.
Hi Bob, Thank you for your question!
A hand held shower can not be connected to the tub spout pipe nipple on the valve body.
Date published: 2016-02-29
I have T14267 ARA shower Trim
Doe this model require spacer to be inserted in the sleeve. What is the purpose of the spacer.
Also the valve is situated deeper behind the wall, i am unable to screw in the bracket on to the valve. Screw provided is short. Any suggestions on how to install the escutcheon.
how many far is the cartridge suppose to be sticking out from the tub surround wall.
Thank you for your question. The spacer inside of the sleeve helps to keep the sleeve snug on valve body. Distance from the stringer to the front of the plasterguard is 2 3/4" ± 1/4" (70 mm ± 6 mm). Note: This is the same distance
to the finished wall. Distance from the stringer to the frontof the bonnet is 3 7/8.
Date published: 2018-01-24
The hole in the tile is slightly larger on one side than shower flange (RP51034). Is there alternative flange of similar design (square) available?
Ara Monitor 14 Series Shower Trim
Shower Flange RP51034
Hi Michael, Thank you for your question!
The RP51034 is 2". We do manufacture the RP:46872 which is 2 1/2".
Date published: 2016-03-02