match Delta T17286 Arzo Monitor
Hi i'm wanting to install this jetted module with the arzo style shower trim, but am struggling to see if they would look ok visually because of the round vs square
Thank you for your question. These units will have different design styles. However, we do not make a T18 trim to match the Arzo collection.
If you do not need the diverter and sprays on a single plate, you could use a T11986 6 Setting Diverter Trim and your choice of body sprays. You will also need the R11000 Diverter Rough-In Valve.
Date published: 2016-01-14
Does this diverter restrict the flow rate to the other components connected through it?
The product features section says "Total unit flows at 2.5 gpm @ 80 psi." Does this mean that the diverter will additionally restrict the flow to the components other than the integrated body sprays?
For instance, if the valve I use has a flow rate of ~6 gpm @60 psi, and I attach a 2 gpm shower head and a 2 gpm hand sprayer through the 2 additional outlets on the R1827-XO rough-in that this 6-way diverter trim controls, will I be able to get 4 gpm through it if I select the shower head + handshower diverter position, or will it restrict the flow to 2.5 gpm?
Thank you for your question, AndrewG! The flow rate mentioned in the product features refers to the body sprays rather than the output of the valve. You should get a maximum combined flow rate of approximately 5.0 GPM or more from the valve. This will be enough to run any combination of showering components at the full flow rate.
Date published: 2017-10-03
Am I able to add this to a 1755RB-716RB diverter kit
I have a 1755RB-716RB tub faucet set installed. I would like to add in a T18037-XO. Can this be done without replacing the existing diverter kit?
Thank you for your question. To be able to use the T18037-XO, you will need to install the R1827-XO. Because you are installing the XO model, you may also add another accessory to your shower system like a handheld shower, another jet or another showerhead.
Date published: 2013-10-22