I have purchased a U3001-PK, but I did not find any instructions/pictures on how to install Hand Held Shower Wall Mount. Please advise.
Thank you for your question on the Delta Fixed Wall Mount for Hand Shower.
I am happy to assist you where I can today. The instructions for this mount should be listed on the back side of the mount itself.
If your model does not have instructions for how to install the mount listed on the back of the product, please feel free to either email or give us a call at 800-345-3358 and we will be happy to help you with obtaining the instructions.
Delta Faucet Company
Date published: 2017-12-22
Alsons 4252010pk compatiability?
Is this compatible with Alsons 4252010pk?
Thank you for your question. The U3001-PB-PK will work with your Alson's 4252010PK hand shower unit.
Date published: 2017-05-18
how to remove an adhesive mounted bracket from tile wall without damaging the tile.
I mounted the bracket on the wall and want to move it lower.
How do I get it off?
Thank you for your question. First, remove the cover from the base (it is snapped on). There are few things you can do to help remove the adhesive base. You can soften the adhesive by heating it with a hair drier for a minute or two. Then, use a dull knife to work between the backing and the wall as best as possible. Baby oil can help with this step and with removing any remaining adhesive. If there is any adhesive left on the wall you can use rubbing alcohol, vinegar, or products such as Goo Gone, or a Mr. Clean Magic Eraser.
Date published: 2018-01-11
is the angle of hand shower adjustable or fixed?
Hi Jeff, Thank you for your question. The angle of the the model U3001-PK wall mount is in a fixed position. There is no adjustability.
Date published: 2015-03-20
Adhesive mount on tile
I know this has an adhesive mount. Will it work on tiles that are slightly undulating instead of being smooth? These are ceramic tiles.
Hi Murali, Thank you for your question. The U3001-WH-PK can either be used as a screw mount or adhesive mount. The screw mount method would be the preferred mounting method in your case as the adhesive would not be in full contact with the undulating tile.
Date published: 2014-05-08
Compatibility with the In2ition shower head
Does this work with the In2ition handheld shower head?
Hi Murali, Thank you for your question. The U3001-WH-PK will work with the handheld shower portion of the In2ition showerhead.
Date published: 2014-05-10
How can I get the cover off?
I mounted one of these (chrome) using the adhesive, and after some time, and after I had installed the cover, the adhesive let loose.
I decided then to install it with screws. HOWEVER, the cover is locked on --- it interlocks with the head hanger. The cover now can't be removed without destroying it!!!
Is this normal?? Have you made improvement to this to allow cover removal?
Hi Avisys, We are sorry that you are experiencing a problem with your showermount. There is no easy way to remove the cover once snapped into place. Please contact our toll free Homeowners/Warranty line for further assistance with this product.
Date published: 2013-11-04
Where can I get installation/assembly instructions prior to purchase?
This unit does not have any installation instructions available online. Similar units such as: U4005-PK, have product breakdown pictures and installation instructions readily available under the "Product Support...." at your website for that product.
I notice that a previous questioner, seeking to learn how to move an already mounted U3001-PK, received an "expert" answer stating that it might be both mounted with an adhesive and concealed screws......but failed to tell the questioner where the concealed screws might be....or how to get to them.
The question wouldn't have needed to be asked if the installation/assembly instructions were readily available online at your website.
I am so sorry to hear that you are experiencing dificulty locating installation instructions. Here is what I have found for Delta Faucet model # U3001-PK:
1. Separate cover from base and remove protective sleeve.
2. Select wall position suitable for hose length.
3.Determine type of mount for your application, i.e. screw anchored to wall or adhesive mount to wall.
3a. Screw anchored into tile-drill 1/4" holes in grout and use enclosed anchors. For fiberglass/acrylic, use only small togglebolts. 3b. For adhesive, clean surface using steel wool, followed by lighter fluid or fingernail polish remover, wipe. Peel off green adhesive gacking film. Position with tapered holder upright, press firmly.
4. Snap shell cover over base on wall.
5. Allow adhesive mount to cure 24 hours before using.
Date published: 2018-01-11