What is the inside diameter of the wand holder?
My current wand tappers from 3/4” to 1” will your wand holder accommodate this was Done?
Thank you for your question, Bill! All Delta hand shower mounts will have a 7/8" diameter tapering to a 13/16" so your hand shower hose should fit this mount.
Best regards, Edward
Date published: 2018-06-27
Does this item determine the flow-rate (gpm) for the attached handheld shower head? If so, what flow rate (GPM) does this Arm Mount provide?
Thank you for your inquiry! The Delta Adjustable Shower Arm Mount for Hand Shower U3401-PK does not determine a flow rate. It is designed to hold a hand shower and connect the hose to the water supply at the same time.
Date published: 2017-07-11
Looking for interior diagram
Need to reassemble and want to make sure interior parts (washers, rings) are correctly placed and ordered. (Also uncertain if split ring is intended to be split.)
Thank you for your question. The Delta Adjustable Shower Arm Mount U3401-PK is not designed to be taken apart and put back together. If your unit is broken we would be more than happy to assist you. Please call the toll-free Peerless Help Line at 1-800-438-6673 between the hours of 7:00 AM to 7:00 PM Monday ~ Friday as well as 9:00 AM to 6:00 PM Saturday CST. You can also contact us via email at firstname.lastname@example.org.
Date published: 2017-03-11
I bought this as an adjustable mount and have connected it to move it around. Is there a way to loosen it up so that it can pivot?
Thank you for your question!
The shower arm mount is able to be angled. It should already be loose enough where you can angle it but tight enough where you're able to keep the mount angled where you want it.
Date published: 2016-10-26
How do you adjust this?
I would like the handheld shower to point in a downward position but do not see any directions on how this is adjusted.
Thank you for your question. There is a ball joint just in front of the portion that screws onto the shower arm. Once you have it installed, you can pivot the mount up or down by about 30 degrees.
Date published: 2016-01-22
Will it make my Delta handheld easier to use?
I recently bought & installed Delta model 59345-PB-PK. But the added height of this handheld unit (versus where the old sprayer was) almost backs me up against the back wall of the shower because of the angle.
Will this adjustable mount alleviate that problem?
Thank you for your question! The 59345-PB-PK comes with the same adjustable hand shower mount.
Date published: 2015-12-03
I know the bracket that holds the handheld is chrome plated plastic. But from the looks of the picture, isn't the female inlet (the part that screws on to the shower arm# made of chrome plated brass? The 2 flats #made for a crescent wrench) indicate that. Usually the plastic female inlet doesn't have 2 flats on it, but knurls all the way around.
Hi Tracy, Thank you for your question. The portion of the U3401-PK that screws onto the shower arm with the pivoting ball is a metal component.
Date published: 2014-01-14
Can you tell me if this arm will accommodate a former product from Delta (it may have been discontinued)? The number is/was RP14990. Many thanks.
Thank you for your question. Delta Faucet model # U3401-PK will accomodate any standard Delta Faucet hose assembly.
Date published: 2013-10-22