Follow along as Hannah walks through how to install the Delta® Neo Angle Corner Shower Base (B79912-3838-WH), note that this video will also work for the Delta® Square Corner Shower Base (B111306-3232-WH). See our supply list and video shortcuts below to make installing even easier.
You'll Need:
- Phillips screwdriver
- Gloves
- 1/16" x 1/16" x 3/32" U-Notched Trowel
- Drill
- Safety Glasses
- Caulk Gun
- Level
- Carpenters Square
- Cardboard
- Caulk
- Hole Saw
- Utility Knife
- Masking Tape
- Phillips Screw Bit
- Tape Measure
- Pencil
Steps:
0:00 - Intro
2:21 - Check Studs Are Square & Level
3:43 - Dry Fit Shower Base
5:15 - Drill Pilot Holes
6:22 - Adhere Shower Base to the Subfloor
7:28 - Set Shower Base
Check out these related videos:
How to Install a Delta® Prefab Shower Drain - https://youtu.be/VK_5mjZHhHI
How to Prepare to Install a Delta® Corner Shower - https://youtu.be/RNbtPBC5fBE
How to Install the Delta® Adhesive Corner Shower Wall Set - https://youtu.be/tGQQyDFgZOg
How to Install the Delta® Neo Angle Corner Shower Enclosure - https://youtu.be/DCa8e1pijI8