Foundations®
Single Handle Kitchen Faucet with Spray
Model#: 10901LF
List Price*:
$132.70
This Delta® faucet provides a practical, hardworking solution that will stand the test of time, every time. Delta is a reflection of your personality and is as individual as you are.
- Meets standards set by Americans with Disabilities Act
- Includes convenient side sprayer
- 4-hole installation
- Standard spout swivels 360degrees for complete sink access
Special Features
-
With Side Sprayer
-
ADA Compliant
Installation Information
4-hole 8" installation
- Flow Rate: 1.80 gpm @ 60 psi, 6.8 L/min @ 414 kPa
- Spout Height: 7-11/16"
- Spout Length: 9-7/16"
- Fittings Type: 1/2" IPS connection
- Valve Type: Stainless Steel Ball
Rated 4 out of
5
by
Thomas from
Great Value
Operates very smooth, easy install
Date published: 2019-04-12
Rated 1 out of
5
by
BEM08 from
Leaked immediately from sprayer connection
The plastic piece on the sprayer hose that connects to the copper piece under the handle leaked immediately. Figured that the only easy snap connection is the one i'm having problems with.
Date published: 2019-02-25
Rated 5 out of
5
by
Patrick from
Sleek chrome faucet
I needed to replace my kitchen faucet and decided on this Delta faucet and found it to be a great addition. The lever moves so smoothly as well as the spout. I'm looking forward to years of service from this faucet.
Date published: 2019-02-24
Rated 1 out of
5
by
JLee from
Spray handle leaks
I bought two of these in past 2 years. I thought delta was a decent brand but evidently i was wrong because both had the exact same problem. They both leaked water out behind the handle you push on the sprayer. first one i popped handle off and seen it was cracked behind it. Figured was just defect from molding process and bought second one which had same problem occur. Now im afraid im done with delta products.
Date published: 2019-02-21
Rated 5 out of
5
by
Rose from
It is a single handle.
The faucet was easy for me to install.
Date published: 2019-01-25
Rated 3 out of
5
by
Kenneth from
makes thump noise
I bought this @ 2 months ago and installed it for my daughter. The faucet makes a thump when turned on, and after being off for a few minutes ,will thump again when turned on,She is still using it,but the thump is annoying.What can be done to stop it?
Date published: 2018-11-29
Rated 1 out of
5
by
Dollarbilly from
Spout rusted through after only one year
Bought and installed this product in July 2017. Now I see water spraying out of the middle of the spout and find that the spout has rusted through causing a pinhole leak. For Delta's reputation and what I paid for this faucet I would have expected that it last a lot longer than that. So far Delta has been of little help honoring their "Limited Lifetime Warranty" on this product.
Date published: 2018-10-01
Rated 5 out of
5
by
Geneva from
Works fine but was expensive.
I have been using this faucet for about a week now with no problems. It works very well. I paid almost $70 for this faucet and expect it to last a long time.
Date published: 2018-07-05
Is the set screw sold separately for this model (10901LF)?
I don't need the entire handle assembly, just the set screw.
Hi Molly, Thank you for your question!
The set screw for the 10901LF single handle kitchen faucet is only available with the RP70834 handle kit.
Best regards,
Brandis
Date published: 2016-07-15
Delta 1090x Faucet -- How do I remove the Seats and Springs? I'm trying to install Repair Kit 44124. I've removed the Handle, Adjusting Ring, and Ball Assembly, but the Seats and Springs are stuck (or perhaps are not removable?) Any ideas?
Hi, Mark!
Thank you for your question. The seats and springs for the Delta 10901LF faucet can be removed by scooping them out with the end of a small Allen wrench. Place the end of the Allen wrench into the middle of the seats and springs and 'scoop' them out of the valve body.
Best Regards,
Rosanna
Date published: 2019-03-12
Delta 1090x Faucet -- How do I remove the Spout? I am trying to install the Repair Kit RP4412. I have removed the Handle, Adjusting Ring, and Ball Assembly, but NOT the Seats and Springs. The Spout does not slide off. How can I remove it?
Hi, Mark!
Thank you for your question. To remove the spout for the Delta 10901LF faucet, you will want to first, remove the handle and unscrew the bonnet nut. The spout will usually come straight off. Very occasionally, you may have to twist left to right and pull up to remove the spout if it is not coming straight off.
Best Regards,
Rosanna
Date published: 2019-03-12
What's the difference between this faucet and the B4410LF?
Hello Richard,
Thank you for your question. There are slight differences between Delta Faucet models 10901LF and B4410LF, the main one is the handle assembly.
Best regards,
Tanya
Date published: 2019-01-03
How do I dis-connect the hose from the water supply going to the water sprayer connected to the faucet the instructions tell how to connect which was
was very simple but does not explain how to dis-connect the item
Thanks
Hi Curly, Thank you for your question. To remove the sprayer connection squeeze the top part of the 2 tabs on the sides of the block connector. Push up slightly and pull down to remove.
Thanks,
Dave
Date published: 2014-08-18
My plastic quick connector (kitchen faucet model 10901LF) for the sprayer is leaking. How do I remove the connector and repair the leak?
Hi, Robert.
Thank you for your question, and I am sorry to hear that you are experiencing an issue with your Delta 10901LF faucet. To remove the sprayer hose, first press the two tabs in together like a clothespin. At the same time, push the hose assembly upon the hose. This will release the connection. Once released, pull the hose down and off.
Best Regards,
Rosanna
Date published: 2018-10-16
Whats the difference between 10901LF and B4410LF?
10901LF and B4410LF appear to be nearly identical. Their stainless steel prices are $190 and $150 so what accounts for the price difference?
Thank you for your question. There are slight differences between Delta Faucet models 10901LF and B4410LF with the main one being the handle.
As far as the price differences, we do not dictate what prices will be charged in the retailers or wholesalers. We give them a suggested retail price, and then they decide what to charge the consumer.
Date published: 2018-07-16
Are the copper lines suppose to swivel? I purchased new and during installation I noticed they move.
I was trying to install and noticed the lines will swivel around? All other faucet I have installed have never done this I also purchased the corresponding bathroom faucet in this set and it does not move.
Thank you for your question, RB. This is normal. The supply can spin until the faucet is installed.
Best regards,
Jon
Date published: 2017-10-31
Featured Accessories
RELATED PRODUCTS View Collection
