Has this pot filler been tested to see if it is compatible with reverse osmosis?
Hello, Heidi. Thank you for your question. We do not recommend using our Pot Fillers with reverse osmosis systems. At this time, only our Beverage Faucets can be used with reverse osmosis.
Best regards, Jon
Date published: 2018-11-05
If this faucet lead free?
Thank you for your question, TC. Yes, all of our faucets intended to dispense drinking water (kitchen, specialty, and lavatory faucets) have lead free waterways.
Date published: 2017-11-06
Can the pot filler be hooked up to either hot or cold water lines. Does it matter
Thank your for your question! We do not recommend using hot water for the Delta Wall Mount Pot Filler 1177LF, for safety protection reasons. This unit is designed for cold water only connection.
Date published: 2018-02-26
Is this pot filler ASTM AB1953 certified, and if so, can you please provide the Massachusetts approval code? Thank you.
Hi Erica, Thank you for your question. Attached is the spec sheet for the model 1177LF that covers the lead free legislation compliance and a link to the Massachusets product approval website for this product..
Date published: 2015-02-23
Delta Wall Mounted Pot Filler Handle Options?
Does Delta have any different handle options for the Pot Filler? Is it possible to order different handles as an extra? If so, what options are available?
Thank you for your question. Delta Faucet model # 1177LF does not have any other handles available at this time.
Date published: 2013-10-22
How high above the counter top should a pot filler be installed at ?
Thank you for your question. There is not a required measurement from the stove top to the Delta 1177LF pot filler. We do leave that decision up to the end user. Here is a link to the technical specifications for measurements for the faucet:
Date published: 2019-02-02
What sink faucet system best matches the traditioinal wall mount pot filler?
Thank you for your question! Since the Pot Filler is not part of a specific design collection, any of our Traditional style faucets will match some of the design aspects. Please click the link below to browse our selection of kitchen faucets with a Traditional design style.
Date published: 2016-06-28
What are the sizes of each arm for the Filler?
Thank you for your question. Included here is the spec sheet for Delta Faucet model # 1177LF-RB.
Date published: 2017-06-09
What is the total width of this product when it is folded up?
Thank you for your question. The faucet body is 14" wide when parallel with the wall. When the handle is turned outward, the total width is 16".
Date published: 2016-03-15
Why is this product not available in and not shipped to CA?
I can't buy it here in CA and nobody will ship it here - why?
Hello Phil W,
Thank you for your question. Due to recent California mandates, faucets installed in the kitchen and lavatory are required to have a flow rate of 1.2 GPM or less. Delta model 1177LF-SS has a flow rate of 4.0 GPM.
Date published: 2016-11-21
What is the closest match to
Brushed nickel ?
Thank you for your question, Chris! The Stainless Steel finish is a very close match to brushed nickel.
Best regards, Jon
Date published: 2018-11-27
Is this pot filler all metal or are there some plastic parts?
Aside from gaskets it is all metal
Date published: 2017-09-24
At what height does Delta recommend installing a pot filler ?
Thank you for your question. We do not have a recommended height to install the Delta 1177LF pot filler. We leave this decision up to the user.
Date published: 2019-02-27
I have the pot filler 1177LF-SS in brilliance stainless. I am looking to purchase a kitchen faucet that matches that finish and style. Is there another finish that matches the brilliance stainless?
Thank you for your question and for your interest in our Delta faucets. The style of this 1177LF-SS is Traditional. You can find matching, Traditional-style faucets under the 'Kitchen Faucets' link here:
You can choose to filter out options such as 'Style', 'Finish', 'Type', etc.
The Brilliance Stainless Steel finish will match up with faucets that have 'SS' (Stainless Steel) in the model number.
Date published: 2018-04-19
Is there a kitchen sink faucet that matches the pot filler faucet?
Thank you for your question. The Delta Pot Filller 1177LF-AR does not have a specific matching collection style. Any of the Delta kitchen faucets in the Arctic Stainless (AR) finish could be installed with this pot filler.
Date published: 2018-03-12
Is this unit made from Brass & ok to use with an RO system?
Can this be hooked up to an Reverse Osmosis water filter?
I have seen other manufacturers not recommend using their pot fillers with RO water because it does not interact well with the brass insides of the fixtures.
Hi sjhanksaz, Thank you for your question. We would not recommend using an RO system with our model 1177LF-SS pot filler for the reasons stated in your question.
Date published: 2015-03-27
Does artic stainless or stainless match best with Wolf Professional appliances with a brushed stainless finish?
Thank you for your question. Yes, either our Arctic Stainless or Brilliance Stainless Steel finishes should be the closest matching finishes we manufacture to a Wolf Professional Appliance Brushed Stainless finish.
Date published: 2018-11-28
The home I recently purchased is four years old. It has a Delta pot-filler above the gas range. I have noticed the spout drips some. Could you make suggestions as to how to remedy the problem?
Thank you for your question, Grumpy! I'm sorry to hear this pot filler is leaking and we would be happy to help. Under each handle is a valve cartridge. You can gain access to this by removing the button cover on the top of the handle. A screw holds the handle in place. The water must be turned off to the unit, or room before removing these cartridges. Even though the warranty only covers the original owner of the model, please know that any repair parts purchased would then be covered under our lifetime limited warranty. You will need to order RP74972SS if you have Stainless Steel as this will also include new handles.
Best regards, Edward
Date published: 2018-11-26
at what height should i leave the 1/2 pipe sticking out of the wall
delta 1177LF-SS pot filler
Hi Bob, Thank you for your question. We do not have a recommended height at which to install the 1177LF-SS pot filler. Appliance height, cabinet height, and other variables affect the placement of the faucet.
Date published: 2018-03-21
I am installing a new kitchen and with a wolf cook top. I am in a Delta DL1177LF-CZ how high above the cook top do recommend installing the 1/2" supply.
Thank you for your inquiry, Jack! Yes, the Delta Traditional Pot Filler 1177LF-CZ is recommended to be connected to a 1/2" IPS supply line that extends 1/2" past the finished wall surface.
Date published: 2019-01-10
Is this pot filler compatible with reverse osmosis-filtered water?
Thank you for your question. Unfortunately, this faucet has not been tested with a reverse osmosis system. The faucet can be used, but low PH water provided by the R/O system may affect the internal o-rings over time.
Date published: 2017-01-19
Can a water filter such as PUR be attached to this pot filler?
Thanks for your question. A water filter can be installed onto this 1177LF Pot Filler faucet as long as it has compatible connections. However, we do not recommend to add a water filter to a Pot Filler faucet as it will greatly decrease the flow of water to fill a pot, etc.
Date published: 2018-03-02
If I want the filler end to be centered on the range after install, what is the offset required for the installation of the nipple out of the wall?
Thank you for your question. In the fully extended or folded (parallel with the wall) position, the spout end will be centered with the supply nipple.
Date published: 2018-04-15
If the pot filler is placed in the middle of the stovetop/range, would the heat from the range damage the valve of the pot filler?
Hi Ali, Thank you for your question. As long as the external temperature does not exceed 150 degrees the model 1177LF-SS faucet will not be affected. We recommend folding the pot filler back to the wall and away from the stove top when not in use.
Date published: 2015-03-05
Inverted nstall possible?
Is it possible to install "inverted" like this picture? The delta spout would of course be rotated 180 degrees. This would make sure the first arm could clear even the ttallest pot that may be next to the wall while filling a pot on the front side of the stove.
Thank you for your question. Both arms can be rotated over 180 degrees, so the spout can be positioned on the right or left. I hope this answers your question!
Date published: 2016-01-31
Does the wall mount kit (RP64634) come with the pot fill or is it ordered separately?
Thank you for your question. The Delta RP64634 wall mounting kit is included with the Delta 1177LF-RB faucet.
Date published: 2019-01-09
What is the measurement from the center of wall nipple to bottom of faucet?
I am setting the plumbing and want the bottom of the faucet to be 14" above the deck. Need to know exactly where to stub out the nipple. Thank you
Hi Rick, Thank you for your question. The distance from the bottom of the faucet to the center of the pipe nipple is 3.12".
Date published: 2015-11-04
What is the distance from the stove top to pot filler wall connection
Thank you for your question. There is not a required measurement from the stove top to the Delta 1177LF-PN pot filler. We do leave that decision up to the end user. Here is a link to the technical specifications for measurements for the faucet itself:
Date published: 2018-10-16
How high above the surface of the stove do you normally install he Pot Filler?
Thank you for your question. Delta Faucet model # 1177LF-RB does not have a recommended height for installation. It is customer preference to the size of the pots they will be filling.
Date published: 2016-10-22
I know the top arm will swivel all the way left or right but does the bottom are swivel both ways as well?
Thank you for your inquiry, Debby! Both arms of the Delta Traditional Pot Filler 1177LF-RB unit, can be rotated over 180 degrees.
Date published: 2018-04-16