Single Handle Kitchen Faucet with Spray & Soap Dispenser

Bellini

Model#: 11946-SSSD-DST
11946-SSSD-DST is rated 4.2 out of 5 by 115.
  • y_2018, m_8, d_17, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_115
  • loc_en_US, sid_11946-SSSD-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 30ms
  • REVIEWS, PRODUCT

Download Image


Compare Favorite Add To A Project View my Items image/svg+xml Print
Finish: Stainless
List Price (US $): $330.00

BASE PARTS
11946-SSSD-DST
$330.00

  • Water-Efficient
  • No-Lead Compliant
  • DIAMOND Seal Technology features a valve embedded with diamonds to ensure like-new operation for the life of the faucet
  • Includes matching finish soap dispenser
  • Meets standards set by Americans with Disabilities Act
  • Includes convenient side sprayer
  • 4-hole 6-16 in. installation
  • Standard spout swivels 180degrees for greater convenience

Technology

Special Features

Installation Information


3 or 4-hole 8"-16" installation


  • Flow Rate: 1.80 gpm @ 60 psi, 6.8 L/min @ 414 kPa
  • Fittings Type: 3/8" compression fittings
  • Supply Lines: Included InnoFlex® Pex-C Supply Lines
  • Valve Type: DIAMOND Seal Valve
Rated 4 out of 5 by from 11946-SSSD-DST Review This is a nice appearing and functioning faucet. I especially like the way Delta has improved the installation features. Faucets I have installed in the past have large nuts that have to be tightened but they are up behind the sink with hoses running through them, very difficult to tighten. This faucet has features that make the installation much easier. I hope Delta keeps improving on the install. What confused me for a while was the package contained two items not used with this faucet but was not explained in the instructions. Also there are two different "Nylon" seal washers but have the same part number and one has a sticky back, the instructions did not explain which goes where. Hope I did it correctly. The spray hose feels light and cheaply made, we will see how that goes.
Date published: 2018-08-15
Rated 1 out of 5 by from No lifetime warranty since it rusts and crumbles after time it just falls apart. First the soap dispenser is junk, then the aerator just blew out in pieces, no one has a correct replacement for that as the listed one is and has been incorrect. Now the plate below the faucet that holds the on off handle tight and the all-thread that attaches it to the plate have completely rusted through. I'm guessing via a leak in the valve, since there are no other issues under the sink. theres literally a pile of rust under it. This was one of the most expensive options available when I purchased it, lesson learned, price does not equate to quality in this case. This one will be tossed to the dumpster along with the Delta Name... just for fun i checked the other faucets installed in this house new at the same time, they were budget models of a lesser name, reserving the Delta and the expensive stuff to the open kitchen. Well they all have nice brackets free of rust.
Date published: 2018-08-12
Rated 4 out of 5 by from disappointed Needed to buy this to replace another Delta set that we had bought some time ago & disappointed to find that this was the only one to choose from for a replacement.. Also VERY DISAPPOINTED that you no longer have the drinking water faucet that has the PUR filter that mounts the filter container under the counter..Also, the directions for this unit are terrible!!!
Date published: 2018-08-07
Rated 4 out of 5 by from Attractive style Bellini faucet needs improvement. Newly installed, it drips a little if you don't turn it off in just a certain way. Seems it shouldn't be that tricky.
Date published: 2018-07-13
Rated 5 out of 5 by from Exceptional Quality Faucet is easy to install and very well engineered! A great product!
Date published: 2018-06-11
Rated 5 out of 5 by from great design love this product from delta
Date published: 2018-06-09
  • y_2018, m_8, d_17, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_115
  • loc_en_US, sid_11946-SSSD-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 29ms
  • REVIEWS, PRODUCT

I need the installation instructions for a Delta Bellini 11946 SD Faucet

Asked by: Ritchard
Hello Ritchard, Thank you for your question. I have included below the Delta Bellini Kitchen 11946-SSSD-DST faucet Maintenance and Installation document link below. https://media.deltafaucet.com/MandI/X00064943_F.pdf Best regards, Tanya
Answered by: Tanya
Date published: 2018-08-14

Hi, can I order a replacement set screw and button for this faucet? I didn't see in the parts list. Thanks

Asked by: Clifo
Thank you for your inquiry, Clifo! The set screw RP40650 and button cover RP50786SS of the Delta Bellini Kitchen 11946-SSSD-DST can be purchased separately, from the full faucet. These parts can be purchase at any local or online dealer that sells Delta faucets. https://media.deltafaucet.com/PartsDiagram/DPD-K-11946-SD-DST.pdf Best regards, Tanya
Answered by: Tanya
Date published: 2018-08-14

On Model No: 11946-SD-DST (Bellini Faucet), can the control handle be mounted further than 4" from the spout. My deck holes are 8-1/2" on center.

Asked by: Wayne
Thank you for your question, Wayne! This faucet will work in a 3 o 4-hole installation on 8" to 16" center. Best regards, Jon
Answered by: Delta Faucet
Date published: 2018-07-27

Are replacement parts available for the Delta 11946-SSSD-DST Bellini Single Handle Kitchen Faucet with Spray and Soap Dispenser, Stainless? The knob that controls flow and temperature has worn down and is difficult to turn off water without drips.

Asked by: robert
Hi, Robert! Thank you for your question, and I am sorry to hear that you are experiencing a leak from your Delta faucet. We recommend to clean the bottom puck on the valve cartridge assembly and retighten the bonnet nut to stop the leak. To do this, turn the water off at your shut off valve. Remove the handle. Unscrew the bonnet nut. Pull the valve cartridge out and clean the bottom puck on the valve cartridge assembly. Reinstall the valve cartridge assembly and retighten the bonnet by turning clockwise, to the right. Install the handle back on and turn the water back on. Test the faucet. If the faucet still leaks, we recommend to replace both the valve cartridge assembly, RP50587, and the bonnet nut, RP51503. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2018-06-14

Installed faucet 18 mos ago. Seems to be losing hot water (only) flow as time goes on (50%).  Cold side good. No problem elsewhere in home. 

Asked by: Richpb23
Hello Richpb23, Thank you for your question. We would recommend flushing out each Innoflex PEX line to clear it out, as this is where debris and/or particles seem to accumulate. To do this, gather an adjustable wrench, some towels and a bucket. Shut off both water supplies. Disconnect the hot side Innoflex line and point it into a bucket. Move the handle to the full on position, middle temperature. Turn on the cold supply valve full. Let a gallon or two flow into the bucket. Shut off cold water supply. Check bucket for debris. If no debris, empty bucket and run one more time. Move the faucet handle handle to off position. Reattach the hot side line. To flush the cold side Innoflex line, just substitute cold for hot, and hot for cold in the steps. If you're still getting a few remnants of debris in your water, unscrew the spray head from your hose and turn the water on with the hose pointed into the drain to flush the spray hose. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2018-06-12

3 questions: 1.Do all parts accept 2.5" deck thick? 3.Is there an adapter that would allow a thicker deck thickness than 2.5"? That will be really close for existing counter reno we have? 3. And if so, is that adapter available for all 4 pieces

Asked by: Glenn
Hi, Glenn! Thank you for your question. All parts, spout, handle, sprayer and soap dispenser all have a maximum deck thickness of 2.5". Unfortunately, there is not an adapter/thick deck kit that will fit this faucet. I do apologize for this inconvenience. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2018-05-10

I want to put a swivel aerator on my Bellini kitchen faucet, but I can’t find an adapter that will connect. That includes a Delta RP51505. Is there an appropriate adapter or a swivel aerator that will fit? 

Asked by: Delegate
I have the RP51505 adapter, but it doesn’t fit. The aerator that came with the Bellini screws in and out easily, but the RP51505 won’t screw in. 
Answered by: Delegate
Date published: 2018-04-15

Installed this week. Sprayer won’t turn off when sprayer handle is released. Could the sprayer handle or valve spring at bottom of sprayer tube be defective? I’ve tried partially closing water line valves to regulate pressure but that didn’t work.

Asked by: Be20flyer
Hi, Be20flyer! Thank you for your question, and I am sorry to hear that you are experiencing an issue with your Delta faucet. We recommend to replace the defective sprayer assembly, RP53880SS. To better assist you with warranty information, please contact our Delta Customer Service line at (800)345-3358. We are available Monday-Friday, 7am-7pm, CST and Saturday, 8am-5pm, CST. You may also email at customerservice@deltafaucet.com. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2018-04-01
  • y_2018, m_8, d_17, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_33
  • loc_en_US, sid_11946-SSSD-DST, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 32ms
  • QUESTIONS, PRODUCT