Debonair®
Single Handle Pull-Out Kitchen Faucet with Soap Dispenser
Model#: 16927-SD-DST
List Price*:
$215.00
- DIAMOND Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
- Everything you need is together in one convenient box, including integrated InnoFlex PEX supply lines
- Includes coordinating soap dispenser
- 1, 2, 3, or 4-hole 8" installation
- Optional escutcheon included for use with additional mounting configurations and a cohesive look
- ADA Compliant
- Pull-out spout swivels 120degrees
MagnaTite® Docking
DIAMOND™ Seal Technology
Touch Clean
Installation Information
1, 2, 3, or 4-hole 8" installation
- Escutcheon: Optional Escutcheon Included
- Flow Rate: 1.80 gpm @ 60 psi, 6.8 L/min @ 414 kPa
- Fittings Type: PEX
- Supply Lines: Included InnoFlex® Pex-C Supply Lines
- Valve Type: DIAMOND™ Seal Valve
Rated 5 out of
5
by
S Hall from
Perfect!!!
I bought this faucet for my new home and I absolutely love it!
Date published: 2018-07-06
Rated 5 out of
5
by
howard from
Replaced a previous delta exactly like this one.
We loved the previous one and wanted one just like it.
Date published: 2018-06-04
Rated 4 out of
5
by
Skrilly247 from
Works good but....
I've had this faucet for the last 6 years and it worked fine for the first 4 years. Over the past two years on two occasions the clip that holds the pull out hose on has broken and has flooded the area under my sink. I would think of a better way for that hose to attach or a better safeguard in place if the hose becomes disconnected. Each time they have sent me a new clip and I have replaced a leaky valve once which they also supplied.
Date published: 2018-05-30
Rated 5 out of
5
by
Marshall from
Sturdy and good functioning
We replaced a Moen and the new Delta is much better and seems to be well built.
Date published: 2018-05-16
Rated 5 out of
5
by
Mike from
Nice faucet
Much nicer than the old faucet that was leaking and had the old vegetable sprayer.
Nice to have the soap dispenser.
Was easy to install and working great.
Date published: 2018-05-02
Rated 5 out of
5
by
WElobo from
Great
I got this a few weeks ago and so fare I love it.
Date published: 2018-03-15
Rated 5 out of
5
by
Marry from
Very Nice!
Love it! Very smooth
Date published: 2018-03-13
Rated 1 out of
5
by
houston_SL from
Started leaking 3 months after Lowes purchase
This unit started leaking 3 months after purchasing from Lowes.
We had 4 (yes, FOUR) leaks because of that. One was major, the cabinet floor is ruined!
I DO NOT RECOMMEND it to anyone. The model quality does not match the name of the Delta brand.
Date published: 2018-03-09
Hello: Our Delta Debonair 16927-SSSD-DSY drips - what would be the part that needs to be replaced to fix this?
Hi, Norm!
Thank you for your question, and I am sorry to hear that you are experiencing a leak from your Delta faucet. There is a bonnet nut that is holding the cartridge down, underneath your handle. We recommend to tighten the bonnet nut to stop the leak. To do this, turn the water off at your shut off valve. Remove the handle. Pull the cartridge out to clean the bottom puck of the cartridge. Reinstall the cartridge assembly. Tighten the bonnet by turning clockwise, to the right. Install the handle back on and turn the water back on. Test the faucet. If the faucet still leaks, we recommend to replace both the valve cartridge assembly, RP50587, and the bonnet nut, RP51503.
Best Regards,
Rosanna
Date published: 2018-05-25
What is causing my faucet to leak? I have a debonair 16927-SSSD-DST. What part do I need to fix it?
Hi, TammyRoy!
Thank you for your question, and I am sorry to hear that you are experiencing a leak from your Delta faucet. There is a bonnet nut that is holding the cartridge down, underneath your handle. We recommend to tighten the bonnet nut to stop the leak. To do this, turn the water off at your shut off valve. Remove the handle. Tighten the bonnet by turning clockwise, to the right. Install the handle back on and turn the water back on. Test the faucet. If the faucet still leaks, we recommend to replace both the valve cartridge assembly, RP50587, and the bonnet nut, RP51503.
Best Regards,
Rosanna
Date published: 2018-03-31
Can I improve the flow in any way?
I just bought and installed this faucet. I like everything about it, the finish, the style and ease of operation. However I am really unhappy with the weak flow. I had no idea there wasn't the usual flow restrictor just behind the aerator. Is there anything I can do to improve the flow on this? Are there any hidden restrictors not shown on the parts blow up sheet? I don't even care if that voids the warranty, I just want some stream.
Thanks for your help!
Eric
Hi, Eric.
Thank you for question. Unfortunately, there is not a restrictor that you can remove to get a higher flow rate. This faucet has a 1.8 gpm. If the faucet is getting less than 1.8 gpm, please contact our Delta Customer Service line at (800)345-3358. We are available Monday-Friday, 7am-7pm, CST and Saturday, 8am-5pm, CST. You may also email at customerservice@deltafaucet.com. We will be happy to assist you further.
Best Regards,
Rosanna
Date published: 2017-10-13
Your spec sheet does not show the height on this faucet. I need something 9inches or under.
The height from base to handle tip is 9.5"
Date published: 2018-01-20
I need a replacement cartridge for this faucet, what is the part #
Thank you for your question, Okie. This faucet uses the RP50587 valve cartridge.
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP50587
Best regards,
Jon
Date published: 2016-12-09
I am getting a new counter top but keeping my delta faucet. What is the size of the hole they will need to cut for the model. 16929-SSSD-DST ?
Hello Tracy, Thank you for your question!
Below is the technical specifications for the 16929-SSSD-DST which will provide the hole size:
http://www.deltafaucet.com/customersupport/documentation/16929-sssd-dst.html?document=ts&fromDetailArea=kitchen&documentIndex=0#flashWrapper
Best regards,
Brandis
Date published: 2016-07-25
What can I do to increase the water flow?
I recently purchased your Debonair 16927-SSSD-DST faucet to replace a similar Moen. I am very disappointed that the water flow rate is very low, much lower than my previous Moen.
Is there a flow restrictor that can be removed? If so, please tell me how to remove it. If it can't be fixed, can I exchange it for another faucet that will deliver a better flow of water?
I need to know how to fix this thing.
Thank you for your question. Delta Faucet model # 16927-SSSD-DST has a 1.5 gpm. There is not a flow restrictor for you to remove. We do offer a few faucets that have a 2.0 gpm that may be better to your liking. The Addison series (Delta Faucet model # 9192-SS-DST) has a multi-flow that dellvers both 1.5 for water effienciecy and 2.0 gmp for high performance.
Date published: 2015-11-02
Featured Accessories
RELATED PRODUCTS View Collection
