Single Handle Pull Down


Model#: 16955-SSSD
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 41ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

Download Image

Compare Favorite Add To A Project View my Items image/svg+xml Print
Finish: Stainless
List Price (US $):


  • High-arc spout swings 360º for added convenience
  • Single lever handle for ease of control
  • Matching soap or lotion dispenser included

Special Features

Product Support, Repair Parts & Technical Specifications

View Maintenance & Installation Sheet

View Technical Specifications

Installation Information

3-hole 8" installation

  • Flow Rate: 2.20 gpm @ 60 psi, 8.3 L/min @ 414 kPa
  • Fittings Type: 1/2" IPS connection
  • Valve Type: Washerless ball valve
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 10ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

What size O-rings are on the valve tube nipple and the hose adapter?

Asked by: Migs
Hi Migs, Thanks for your question. The o-rings are RP13938, which have an outside diameter of .44 inches and an inside diameter of .30 inches. Thanks, Jon
Answered by: DeltaFaucet3
Date published: 2015-09-03

Can I still order rp50814 for this model? We have a leak , thx

Asked by: Jas
Hi Jas, Thank you for your question. Unfortunately the RP50814 wand assembly for the model 16955-SD faucet is no longer available and there is no direct replacement. If you are the original purchaser of the faucet please call our toll free Homeowners/Warranty line at 1-800-345-3358 for further assistance. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2015-05-26

turn on handle not sitting properly when tightened down

I am trying to install the turn on/off unit of the delta 16995. when i tighten the nut from below the counter the unit is tilted to the back. How can i correct this problem?
Asked by: Mike
Thank you for your question. Delta Faucet model # 16955-SSSD will tilt to the back if the stud is not pushed all the way to the back of the sink hole before it is tightened down. Try reinstalling the valve and making sure the valve is pushed all the way to the back of hole before tightening it down.
Answered by: Delta1
Date published: 2013-10-22
  • y_2018, m_7, d_19, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_16955-SSSD, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 11ms