Fitting RP6038 retaining nut
I realize that fitting RP6038 applies only to the Delta Series 200 wall mount and that it fits onto a 1/2" IPS supply line.
But I need to know about the (larger) OUTSIDE THREADING of the RP6038 -- inotherwords about the retaining nut that fits onto the outside of the RP6038 fitting.
Please check your files and provide me the specs of the outside threading (i.e. retaining nut).
Hello Alan, Thank you for your question.
The outside thread of the rp6038 is 1 1/16"-18" .
Date published: 2016-09-06
I would like to know the specifications and fitting dimensions for part #RP6038 on the Delta 200 faucet parts diagram.
I need to replace my Delta 200 wall mount faucet with a newer faucet and need to know the dimensions/ specifications for the fitting #RP6038 on the parts diagram to see if it will interface properly with other faucets
Hi Ken W,
Thank you for your question. The RP6038 only work with this unit. However, they are threaded onto to 1/2" IPS supply lines. The supplies will be on 8" centers (+/- 1/4"), and they should extend 1/8" from the finished wall. Please see the attached diagram.
Date published: 2016-08-05
Where can I get parts?
I need part RP19363. Cover insert assembly. Delta 200
Hello Wade, Thank you for your question!
The rp19363 is a discontinued part. There is no replacement for the item.
Date published: 2016-03-10
What does a person do if they have a Single handle wall mount Kitchen Faucets by Delta Model 200
What does a person do if they have a Single handle wall mount Kitchen Faucets by Delta Model 200 I have looked everywhere to find something that will take its place? The whole track of homes where I live has this Delta Model 200 faucet and nothing to replace it guess we’re talking new back splash and counter top. The sad part is that this was specked on the plumbing plan. GEE WIZZ
Hi Mark, Thank you for your question. The model 200 faucet was discontinued in 2009. We offer the Peerless model P299305LF that is a wall mount, 8" centers kitchen faucet.
Date published: 2016-12-24
Does Delta ever plan to bring back the Delta 200 faucet?
Come on, it's the only cool retro faucet ever to have been out there! Please bring it back, my cover is rusting and I love this faucet! Retro is in, there's gotta be a market for this über-cool design!
Hi Deg, Thank you for your question. There are currently no plans to bring the model 200 back into production.
Date published: 2015-12-04
delta 200 faucet leaking from spout
I need to make sure the handle is in a certain place or it leaks from spout. Would taking it apart and cleaning it help or do I need to replace something? Thanks.
Hi dsoaktown, Thank you for your question. Changing out the seats and springs and the o-rings should stop any leaks from the spout. The RP3614 repair kit will have all of the parts that you will need. I have attached a link to the model 200 parts breakdown to help with your repair.
Date published: 2016-09-12
Other similar products to the Delta 200
I currently have a Delta 200 however it is a little too small for my kitchen sink. Do you have any other wall mounts that are similar with pull down technology? Using the mounting bracket and cover are any of your current models interchangeable?
Thank you for your question. At this time, we do not manufacture any kitchen wall mount faucets except the pot filler line and they are not pull-down models. I will pass along your suggestion that you would like a wall-mounted pull-down kitchen faucet to our engineering team.
Date published: 2015-12-04
Do you offer a version of the Delta 200, one that has a similar faceplate?
We took the old one off and the tile in the back is bad, and preference would be to cover it up insteadof fixing the tile. Would prefer the Delta 200 or another one with the face plate.
Thank you for your question. Unfortunately, we no longer manufacture Delta Faucet model # 200 and do not have an escutcheon plate large enough to cover it.
Date published: 2016-04-21