Just purchased the Vessona and my wife is complaining about the slow flow rate. Is there a part available that gives faster flow rates?
Thank you for your inquiry! The Delta Vessona Kitchen 21925LF-SS faucet is designed with a flow rate of 1.80 GPM at 60 PSI. There is no parts that can be removed or added to increase or decrease this design flow rate.
Date published: 2018-05-15
Does model 21925LF come in another finish than stainless steel? if so, What is part number for sprayer?
Thank you for your inquiry, Koze! The Delta Vessona Kitchen 21925LF-SS does also come in the the Venetian Bronze finish and the sprayer assembly listed for it is RP50782RB. Please see the Part Diagram for this faucet, below.
Date published: 2018-04-14
Is it possible to use this faucet without the plate underneath?
Can I remove the plate and install in 4 holes on a granite counter-top?
Thank you for your question. The escutcheon/base plate of the Delta Vessona Kitchen 21925LF-SS faucet, is not a removable part. This plate is apart of the valve body of the faucet.
Date published: 2017-11-21
I'm buying this foucet now, I don't have a whole for the sprayer but I would like to make a whole which size but do I neneed to buy ?
Thank you for your question. The threaded shank for the sprayer support is 1" and the base is 2 1/2". It will fit in standard 1 3/8" installation holes.
Please see the Technical Specifications for more information:
Date published: 2017-09-28
How can we adjust the water pressure?
We love the new faucet but find we have lost a lot of water pressure. The stray hose is great and the pressure is perfect, but the main water pressure is a lot less than we used to have with our old faucet. Is there a way to adjust this?
Adjust the pressure by turning up the water valves under the sink, where your faucet is connected
Date published: 2017-01-14
What year was the LF added into the model number? I noticed all the models of the Vessona are discontinued except that one. Are the others unsafe?
I love everything about this faucet. It has held up great and still looks very nice and I'm picky. One of the handles have become loose over the years. If the set screw is stripped what can I do?
They sell a reverse drill bit which can extract the old set screw if you can't remove it and then replace with a new set screw. Just call delta and have them send a replacement. They are very good about free replacement parts.
Date published: 2017-01-14
Water continues to flow after shutoff for a couple of seconds
This faucet turns on to full pressure slowly and when shut off takes a couple of seconds to completely stop flowing. I liken to to how auto closing drawers operate. When using just the sprayer, it operates normally. So is there an adjustment in the diverter?
Hi Bruce, Thank you for your question.No,there is no adjustment to be made. The water that runs after the faucet is shut off is the residual water that remained in the spout draining out. This is normal for the hi arc spouts.
Date published: 2018-01-17
Does Delta offer a swivel aerator that fits this faucet?
Thank you for your question. The only other swivel aerator we have RP63137 that will fit your faucet is only offered in the chrome finish.
Date published: 2013-10-22