Is body of the Collins 340-WH-DST plastic or metal?
I have a current Delta kitchen faucet that I am replacing. I want to replace it with another faucet that is also of metal construction.
Are the parts and body of the Collins 340-WH-DST mainly made of metal or plastic?
Thank you for your question. Delta Faucet model # 340-WH-DST is composed of metallic and non-metallic components.
Date published: 2018-02-09
What is the difference between the DST 300 and DST 340?
I was looking at both the DST 300 and DST 340 and was wondering what the difference in the kitchen faucet is?
Thank you for your question, Steve. The 400-DST has a side sprayer with a separate support assembly for a 4-hole mount. The 300-DST sprayer mounts directly into the faucet's escutcheon plate for a 3-hole mount.
Date published: 2018-01-04
How long is the spout? and Is a longer than normal spout available?
Thank you for your question. Delta Faucet model # 340-DST has a spout that is 9 3/16 inches. There is not a longer spout available for this model.
Date published: 2013-10-22
Differences between 300-DST and 340-DST?
This question was asked a month ago but was not answered correctly. The Delta response referred to the 300-DST vs. 400-DST. Please explain the differences between the 300 and the 340. Also, metal or plastic?
Thank you for your question. The 300-DST and the 340-DST are mostly the same faucet. The only difference is in the style of the handle and also the spout length. The spout length for the 300-DST is 8", while the spout length for the 340-DST is 9-3/16".
Date published: 2018-01-05
Is there a weight available to improve sprayer hose retraction?
Thank you for your question. Delta does not design any weights to fit on the hose assembly of our vegetable/side sprayer assemblies. Installing a weight on the hose assembly could cause leakage or connection issues.
Date published: 2017-08-01
Mount the Faucet
Can you mount the Collins, Single Handle, 340-SS-DST to the counter WITHOUT the base for the faucet and the sprayer?
Thanks for your question! Unfortunately, you would have to use the 3 hole escutcheon to mount this faucet. If you are looking for a 2 hole install with a side sprayer, I recommend either the 175-DST or the 441-DST. I think these faucets may be the type of unit you are looking for.
Date published: 2015-06-25
I see on the specs that the length from center bolt to center bolt is 8" - but I'm wondering the full length and width (footprint) of the base. Thanks
Thank you for your inquiry! The escutcheon plate on the Delta Collins Kitchen 340-DST faucet model is a 10" long plate for a 3-hole 8" center to center installation.
Date published: 2018-08-09
Do both left and right sides use same threaded mounting tubes?
Or does the left mount, the one without the sprayer, use a solid bolt? I ask because I've installed water filter spigots through the left most sink hole before, but a number of faucets appears to have a bolt that goes through the left-most hole rather than a threaded tube (similar to the threaded tube for a sprayer or 2 handled faucet).
Thank you for your question. Both sides have a threaded mounting tube. Please click the link below to view the parts diagram for reference.
Date published: 2017-07-31