Single Handle Pull-Out Kitchen Faucet with Soap Dispenser

Download Image

468-SSSD-DST is rated 3.1 out of 5 by 75.
  • y_2019, m_11, d_18, h_13
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.2
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_75
  • loc_en_US, sid_468-SSSD-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 41ms
  • 1, 2, 3, or 4-hole installation
  • DIAMOND Seal Technology: a lifetime of reliable performance
  • Backed by Delta Faucet's Lifetime Limited Warranty
Finish: Stainless
List Price*: $314.95
Base Parts
List Price*: $314.95
Delta® faucets with DIAMOND™ Seal Technology perform like new for life with a patented design which reduces leak points, is less hassle to install and lasts twice as long as the industry standard*. You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty. *Industry standard is based on ASME A112.18.1 of 500,000 cycles.
  • DIAMOND Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
  • Everything you need is together in one convenient box, including integrated InnoFlex PEX supply lines
  • Includes coordinating soap dispenser
  • 1, 2, 3, or 4-hole 8" installation
  • Optional escutcheon included for use with additional mounting configurations and a cohesive look
  • Pull-out spout swivels 120degrees

Installation Information

1, 2, 3, or 4-hole 8" installation

  • Escutcheon: Optional Escutcheon Included
  • Flow Rate: 1.80 gpm @ 60 psi, 6.8 L/min @ 414 kPa
  • Fittings Type: PEX
  • Supply Lines: Included InnoFlex® Pex-C Supply Lines
  • Valve Type: DIAMOND Seal Valve
Rated 4 out of 5 by from 2 cartridges in 10 years Attractive. I just replaced a second cartridge because the shaft broke off in the handle again. This time I had to drill to extract. This left handle "sloppy". Was gonna replace faucet when I found the warranty. OMG! They are sending me a new handle and cartridge! Delta rocks!
Date published: 2019-08-23
Rated 1 out of 5 by from Always Leaks Just like everyone else having the same problem. I put in a new cartridge in and it will start to leak 2 months later.
Date published: 2019-05-02
Rated 3 out of 5 by from Love the Design Purchased this DELTA kitchen faucet the design and easy installation..Having a big problem with huge grinding sound made when the water handle is turned for on and off..and water temperature..Sounds Awful~~ Hoping that DELTA will remedy this issue..still under warranty~~!
Date published: 2019-04-08
Rated 1 out of 5 by from Poor Quality I bought this three years ago. Since then I've had to replace the nozzle because the switch wouldn't work properly. Now I have a problem with the faucet leaking. The lever would need to be moved around to shut off the leak. Good thing there's a lifetime warranty on parts. I just wish it didn't fail sooner.
Date published: 2018-05-09
Rated 2 out of 5 by from Leaks after a few months. I was excited about my new faucet and thought it looked really good with my newly upgraded kitchen, but it has started to leak really bad and now I'm looking to repair it. I see that others are having the same problem as well and now I have a little buyers remorse for this product when I go to Home Depot and walk past other faucets after having it installed :( I've turned the kitchen water pressure down to try to prevent it leaking sometimes until I repair it. Hopefully after the repair, it will no longer leak other than that, I think it looks very nice.
Date published: 2018-04-15
Rated 1 out of 5 by from Leaks every couple of months Product continues to leak even after new cartridge installed. top bonnet nut loosens and has to be retightened every couple months.
Date published: 2018-03-13
Rated 2 out of 5 by from Would not recommend We would like this faucet quite a bit except for some issues we're having with it. The button that controls the spray vs non-spray does not work well. And we're having a problem with black specks in the water. A plumber just told us that we need to clean out the faucet head, but he said we needed a special tool to remove the aerator to achieve this. This unit did not come with a special tool for removing the aerator and there's nothing in the manual about it. Reading some other reviews, it looks like perhaps our aerator can not be removed. He was unable to fully clean out the faucet head without being able to remove it.
Date published: 2018-02-09
Rated 5 out of 5 by from This is a great kitchen sink faucet. It came with a dish soap dispenser. This faucet has a nice finish and matched my stainless steel sink. It came with a liquid dish washing dispenser. The instructions for installing were clear enough that my college son installed it. Delta has bee a great company and we like their products. They have a large variety of products to suit everyone's need.
Date published: 2018-01-13
  • y_2019, m_11, d_18, h_13
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.2
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_75
  • loc_en_US, sid_468-SSSD-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 13ms

468 SSSD - incorrect replacement valve assembly?

Our 468 SSSD single handle valve set is several years old but continues to work very well. Recently it has begun to drip intermittently with the valve handle 'off', so I researched and bought what I thought was the correct valve replacement (p/n RP50587) to fix this occasional drip. But when I disassembled the valve (according to the directions in the replacement valve packaging), this new replacement valve does not resemble the original 'bad' valve in any manner. The 'old' valve seems to be just a short lever with a polished perforated ball that is sealed against three 'o-rings' in the bottom of the valve seat/receptacle, while the new one resembles a 'cartridge' made of plastic/nylon that seemingly does not seem to fit this existing valve body. Was there an 'earlier model' valve for some 468 SSSD valve sets that might not be illustrated in the parts list? Or did I simply not disassemble the valve sufficiently to the point where it is possible to install this new valve?
Asked by: billzinn
Thank you for your question. Delta Faucet model 468-SSSD has a ball assembly inside. The part you will need to replace is Delta Faucet part # RP70.
Answered by: Delta1
Date published: 2013-10-22

What can be done about black specks in the water when using this faucet?

Asked by: Dee
Hi, Dee! Thank you for your question and I'm sorry to hear that you're experiencing black debris coming from your faucet. We do recommend to replace the hose assembly, RP50390. Here is the link for the hose assembly: If you need anymore assistance, please call our customer service line at 1(800)345-3358. Best Regards, Rosanna
Answered by: Rosanna
Date published: 2016-11-18

which single handle models come in black and how do I find out when looking at your web site?

Asked by: bob
Hi Bob, Thank you for your question. Two models are available in black. Model 470-BL-DST, and Model 4159-BL-DST. To find them on our web site, click on kitchen, then kitchen faucets. Go to the finishes section and select black and matte black. This will bring up the faucets available in those finishes. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2013-10-22

Is there matching water filter accessory for this faucet?

Asked by: Ray
Hi Ray. No there isn't, and what is more it that you can't service the aerator. That means that your water flow will reduce over time as sediment collects in the aerator. If you like your tap water flavored with sediment this is your faucet. I hope that helps!
Answered by: really
Date published: 2014-10-18

How do you fill the soap dispenser on faucet mdl 468-SD-DST?

Newly purchased.
Asked by: Ace
Hi Ace, Thank you for your question! To fill the soap dispenser, lift off the head assembly and pull out the pump, then use a funnel to pour the soap into the bottle. Please be sure to leave a vent for the air to escape around the funnel as you are filling the bottle. Thanks, Jon
Answered by: DeltaFaucet3
Date published: 2015-09-03

i am trying to remove my old delta which we love but it is leaking, i am having a hard time getting the center nut loose from the copper pipe. please advise

Asked by: Josh
Hello Josh, Thank you for your question. We would recommend using the RP11722 wrench, that came with the faucet, to remove the mounting nut. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2018-11-20

I need the pull out sprayer of my Delta faucet. Where can I get this part please?

Asked by: Mayra
Hi, Mayra! Thank you for your question. The sprayer assembly for the Delta 468-SSSD-DST faucet is part number RP44652SS. Here is a link to the part: Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2019-02-13

I'm replacing the cartrage on my 468 sssd DST. Is the cartrage pull out or screw out

Asked by: Kevin
Thank you for your question, Kevin! The DST cartridge simply pulls out of the valve body, however the cap and bonnet nut that holds this cartridge in place, will need to be unscrewed first. Before removing the bonnet nut, please be sure to first turn off both the hot and cold water supply shut off valves. Best regards, Edward
Answered by: Delta Faucet
Date published: 2018-09-16
  • y_2019, m_11, d_17, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.2
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_28
  • loc_en_US, sid_468-SSSD-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 66ms