List Price*:
$93.60
- Disposal flange and stopper
- 4 1/2" diameter brass flange
Special Features
Brilliance® Finish
Installation Information
Rated 4 out of
5
by
Icare2 from
Updated Review
Thanks to Delta’s prompt reply, they immediately shipped me a new disposal flange set, and it does hold water! I wanted to use it for a couple weeks before replying. If water is swished around much, the stopper does flip out of position, because it is not very heavy. And I cannot see how this one is different from the previous two. I am only reserving a star, because I worry what will happen when the rubber gasket wears out. If Delta provides replacement rubber baskets as needed, I will give 5 stars. Love the matching faucet, and appreciate their outreach very much!
Date published: 2018-02-08
Rated 2 out of
5
by
Icare from
Stopper does not hold water
My disposal drain basket also does not retain water. The seller sent me a replacement, which was no different. I have a gorgeous and expensive new Delta Cassidy champagne bronze faucet with both matching drain basket and disposal basket, but cannot fill one sink with water! I welcome a solution, and I would like to consider Delta for my two forthcoming bath remodels. I hope there has been a design correction.
Date published: 2018-01-07
Rated 2 out of
5
by
gutblue from
We have two sinks with this flange and stopper and both leak around the stopper so quickly we can't do dishes without refilling sink several times.
We have two sinks with this flange and stopper and both leak around the stopper so quickly we can't do dishes without refilling sink several times.
Date published: 2017-12-01
Rated 5 out of
5
by
Leslie Onsager from
Essential and great quality
Delta never fails to deliver quality. This flange and stopper will serve the user well. No drawbacks with this product. Most plumbers appreciate the ease and serviceability of Delta Brand products.
Date published: 2017-06-17
Rated 5 out of
5
by
eLInteriors from
Works well!
This flange is working nicely and looks great!
Date published: 2017-06-13
Rated 5 out of
5
by
AmeliaM from
Quietly doing its job
This is an item that I haven't thought much of once it was installed. It does its job, installed easily, and all is well five years later.
Date published: 2017-06-08
Rated 5 out of
5
by
Leslie01 from
Problem free
Worked perfectly. No problems with installation and was a beautiful addition to the sink
Date published: 2017-06-08
Rated 5 out of
5
by
Smyers from
Nice flange
There isn't a whole lot to say about a flange, unless of course it doesn't perform it's function. This one does a perfect job and looks nice while doing it so no complaints!
Date published: 2017-06-07
I have Kenmore Disposal, Will this Flange and Stopper Fit a Kenmore Disposal
Hi Bruce,
Thank you for your question. Delta Faucet model # 72030-BZ has a diameter of 4 1/2". If your disposal has the same diameter, then it will fit. We suggest checking with Kenmore for their diameter.
Thanks.
Jody
Date published: 2015-11-16
Does this model fit Insinkerator disposers?
Thank you for your question. Delta Faucet model # 72030-AR is 4 1/2" in diameter. You will need to check with the manufacturer of your diposal to see if that will fit.
Date published: 2018-11-15
Do you make disposal flange in Black Stainless? I recently purchased one of your black stainless faucets and soap dispenser and would like a matching flange for the sink.
Hello Swartzx6,
Thank you for your question. We do not manufacture the Delta Kitchen Disposal and Flange 72030 in a Black Stainless finish at this time.
Best regards,
Tanya
Date published: 2019-01-08
Will this fit in a sink drain hole that measures 3-7/8" (98mm)? I also would like to know that about 72010-CZ.
Thank you for your question, Eddi! These will fit most sink drains and should fit a sink hole that is 3 7/8". Please refer to the Technical Specifications for more information:
https://media.deltafaucet.com/SpecSheet/DSP-A-72030_A.pdf
https://media.deltafaucet.com/SpecSheet/DSP-A-72010%20Rev%20B.pdf
Best regards, Jon
Date published: 2018-12-07
Will this work with a granite composite sink? Also, is the 4-1/2" diameter measured from the outer edge to outer edge or interior diameter?
Hi Curious, Thank you for your question. The 4-1/2" diameter on the model 72030-AR is measured from the outer edge to outer edge.
Thanks,
Dave
Date published: 2014-07-01
Will this fit a sink hole that is 3-1/2 inches
Hello Andrea,
Thank you for your inquiry! These will fit most sink drains and should fit a sink hole that is 3 1/2". Please refer to the Technical Specifications for more information:
https://media.deltafaucet.com/SpecSheet/DSP-A-72030_A.pdf
https://media.deltafaucet.com/SpecSheet/DSP-A-72010%20Rev%20B.pdf
Best regards,
Tanya
Date published: 2018-12-03
Will this work with a badger 5 garbage disposal and the drain diamater 3 1/2 inch? I purchased my faucet delta in attic steel and I’d like the falnage and stopper to match.
Hi, Andrea!
Thank you for your question. The Delta 72030-AR Kitchen Disposal and Flange Stopper will fit most sink drains and should fit a sink hole that is 3 1/2". Please refer to the Technical Specifications for more information:
https://media.deltafaucet.com/SpecSheet/DSP-A-72030_A.pdf
https://media.deltafaucet.com/SpecSheet/DSP-A-72010%20Rev%20B.pdf
Best Regards,
Rosanna
Date published: 2018-12-05
Hello, Do you guys offer the extended version of this finish basket? i am putting in disposals on fireclay sinks. if so do you have the part number?
Hi Sergio,
Thank you for your inquiry! The 72030-CZ Disposal Flange and Stopper is the only one we manufacture. Unfortunately, we do not offer an extended or longer flange/basket.
Best regards,
Tanya
Date published: 2018-10-20
