Trinsic®

Single Handle Pull-Down Kitchen Faucet

Download Image

9159-DST is rated 4.2 out of 5 by 150.
  • y_2019, m_7, d_15, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_150
  • loc_en_US, sid_9159-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 52ms
  • REVIEWS, PRODUCT
  • Delta MagnaTite Docking holds spray wand firmly in place
Finish: Chrome
List Price*: $418.05
Base Parts
9159-DST
List Price*: $418.05
Configurable Parts
Delta® MagnaTite® Docking uses a powerful integrated magnet to pull your faucet spray wand precisely into place and hold it there so it stays docked when not in use. Delta® faucets with DIAMOND™ Seal Technology perform like new for life with a patented design which reduces leak points, is less hassle to install and lasts twice as long as the industry standard*. Kitchen faucets with Touch-Clean® Spray Holes allow you to easily wipe away calcium and lime build-up with the touch of a finger. You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty. *Industry standard is based on ASME A112.18.1 of 500,000 cycles.
  • MagnaTite Docking uses a powerful integrated magnet to snap your faucet spray wand precisely into place and hold it there so it stays docked when not in use and doesn't droop over time
  • Soft, rubber Touch-Clean spray holes allow you to easily wipe away calcium and lime build-up with the touch of a finger
  • DIAMOND Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
  • Everything you need is together in one convenient box, including integrated InnoFlex PEX supply lines
  • 1 or 3-hole 8" installation
  • Optional escutcheon available for purchase separately
  • ADA Compliant
  • High-arc pull-down swivels 360degrees
  • 54 in. long hose provides outstanding reach

Installation Information


1 or 3-hole 6" or 8" installation


  • Escutcheon: Optional Escutcheon Available
  • Flow Rate: 1.80 gpm @ 60 psi, 6.8 L/min @ 414 kPa
  • Spout Height: 15-11/16"
  • Spout Length: 9-1/2"
  • Deck to Outlet: 8-7/16"
  • Fittings Type: 3/8" compression fittings
  • Deck Thickness: 2.5"
  • Supply Lines: Included InnoFlex® Pex-C Supply Lines
  • Valve Type: Euromotion DIAMOND Valve
Rated 3 out of 5 by from Love the look but, cannot change aerator The faucet looks good however the aerator needs changed and after googling and contacting delta, I got no help. I bought aerators for my 3 delta bathrooms and easy peasy but this is too thin to fit any aerator tool in and there is a serious lack of online support for how to change it
Date published: 2019-06-10
Rated 5 out of 5 by from Delta Kitchen Faucet So far, I love it. It takes some getting used to, but it looks and works great.
Date published: 2019-05-23
Rated 4 out of 5 by from Good Faucet I installed and started using this faucet around Oct 2018. I like most of the features.I wish there was a better way to slow the movement of the handle to control the water flow volume.
Date published: 2019-05-22
Rated 5 out of 5 by from Perfection at its finest! Loving the champagne bronze faucet we purchased for our basement kitchen! Would highly recommend!
Date published: 2019-05-18
Rated 4 out of 5 by from Really like the faucets! I bought 3 of these and 4 bathroom height faucets. They all are tight and work well. Only complaint is that the 3 kitchen height faucets have cold in the up position. The other 5 have cold in the down position. That's according to the red and blue dots on the faucets.
Date published: 2019-05-11
Rated 5 out of 5 by from Delta Matt Black Love this faucet the style the color and of Course how great it is to use.
Date published: 2019-04-17
Rated 4 out of 5 by from Looks sharp, neck could be sturdier I love the look of the faucet. Very solid components overall, but the neck where it connects to the base is slightly wobbly. It’s no deal breaker, but I wonder if a thicker neck connection to the base could give a bit more confidence when pulling the neck out. Higher end sinks use all metal and braided steel hoses at all connection points, where these use more pex and plastic
Date published: 2019-03-29
Rated 4 out of 5 by from Better than average I’ve used for 3 months. No failure. Build quality is better than average but expected it to be a bit heavier and more streamlined modern. Regret not buying chrome instead of metal blasted look.
Date published: 2019-03-23
  • y_2019, m_7, d_15, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_150
  • loc_en_US, sid_9159-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 12ms
  • REVIEWS, PRODUCT

I see this product is “No Lead Compliant.” Is it NSF 372 certified or just NSF 61? Link to Certification? 

Asked by: Valerie
Hello Valerie, Thank you for your question. There are no lead containing components used in the construction of the Delta Trinsic Kitchen Pull-Out 9159-DST faucet or any of our DST (Diamond Seal Technology) and LF (Lead Free) faucets. Delta Certifies products with a third-party certifier, CSA Group, to the ASME A112.18.1/CSA B125.1, Plumbing Supply Fittings. To be in compliance with ASME A112.18.1/CSA B125.1 Section 4.9.1 (excerpt below), the model is required to be in compliance with the applicable section of NSF 61. 4.9 Toxicity and lead content 4.9.1 Fittings covered by this Standard shall comply with the applicable requirements of NSF/ANSI 61. 4.9.2 Solders and fluxes in contact with potable water shall not exceed, by mass, 0.2% lead content. Metal alloys in contact with potable water shall not exceed 8% lead content. 4.9.3 Fittings intended to convey or dispense water for human consumption through drinking or cooking shall not contain a weighted average lead content in excess of 0.25% when evaluated in accordance with the test method specified in NSF/ANSI 372. The product compliance listing can be found online, see link below. http://www.csagroup.org/services/testing-and-certification/certified-product-listing Best regards, Tanya
Answered by: DeltaFaucet11
Date published: 2018-06-03

How do you replace the aerator on this model? I have this model and it needs cleaning but I have no idea how to remove the aerator for cleaning. Note I do not have the manual or original packaging.

Asked by: Robert
Thank you for your question, Robert. The aerator is not designed to be removed. However, you can unscrew the spray wand from the hose and clean the screen at the hose connection as any debris from the water lines would found here. We also recommend soaking the wand in a 50/50 solution of white vinegar and water to help dissolve mineral buildup. Best regards, Jon
Answered by: Delta Faucet
Date published: 2019-07-09

Is there a coordinating hot water dispenser that would work with the Trinsic kitchen faucet in champagne bronze?

Asked by: RKWL
Dear RKWL, Thank you for your question. Delta does make Beverage faucets that can be connected to a cold or hot water supply valve. The Delta 1977-DST would be the closest matching beverage faucet to your Delta Trinsic kitchen 9159-DST faucet. https://www.deltafaucet.com/kitchen/product/1977-DST Best regards, Tanya
Answered by: Tanya
Date published: 2018-07-11

When I have the faucet on the spray setting, and then I turn the faucet off, will it still be on the spray setting when I turn it back on?

Asked by: Jces
yes
Answered by: plkinsella
Date published: 2018-07-11

Does the Arctic Stainless version atomatically come with a soap dispenser?

Asked by: Bill
Thank you for your question, Bill. The soap dispenser is sold separately. The best match for the Trinsic collection is the RP1001AR or 72065T-AR. https://www.deltafaucet.com/kitchen/product/RP1001AR https://www.deltafaucet.com/kitchen/product/72065T-AR Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-12-12

Retracting hose

We love this new faucet, but seem to have trouble retracting the pull down wand after we pull it out. It pulls out ok and the magnet helps it go back in place, but we find that we have to guide the hose back in. Do we need more weight? Is there anything we can do to improve it? Thanks!
Asked by: Diana
Dear Diana, Thank you for your question. The hose assembly of the Trinsic Kitchen Pull down faucet 9159-DST model, is not designed to self retract back in the faucet. You would need to push it back up into the faucet. Delta does not make self retracting Pullout/down faucets. Best regards, Tanya
Answered by: Tanya
Date published: 2016-09-03

Can the on off handle be on the left as well as the right?

Asked by: Time
Hello Time, Thank you for your question. We recommend installing the faucet with the handle on the right. The handle operates by tilting away from the faucet to turn on and rotating forward to increase the temperature. Unfortunately, there is no way to reverse the movement, so if the handle is installed on the left, it will rotate backwards. Best regards, Jon
Answered by: Delta Faucet
Date published: 2018-08-16

Is the spray head metal or plastic? 

Asked by: Joselyne
Thank you for your question, Joselyne! The sprayer assembly is non-metallic. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2018-06-15

Can this (9159-DST) be installed with on/off handle in front?

Your specifications indicate that 2 1/2 inch clearance is necessary between the spout center and the backsplash. My clearance is only 1 1/2 inch so I am wondering if this particular faucet can be installed so that the handle is positioned in front. Thank you for your help.
Asked by: Mary Jane
It should. The faucet swivels 360 degrees
Answered by: plkinsella
Date published: 2017-09-23

WHAT ARE THE SPRAY OPTIONS FOR THIS FAUCET?

Asked by: THE NEST
THE NEST, Thank you for your question. The pull-down sprayer has a switch for aerated stream and spray. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2018-02-28

Once the 54" hose that it comes with is installed, how much of that hose can be extended from the faucet? If I substitute it with the 62" hose, are you saying that it will only extend 18-22" from the faucet? I am looking for a faucet that has approx. 24" 

Asked by: CMMH
Hi CMMH! Thank you for your inquiry and I apologize for any confusion. With a 62" hose installed, the total length of the pullout hose from the spout will be approximately 22", however, including the wand attached, total length is 24". Best regards, Edward
Answered by: DeltaFaucet234
Date published: 2018-04-11

Is there a version of this faucet with only a 7 or 8 inch reach?

I want something like this for a smaller sink. If a variation on this faucet does not exist, can you point me to a similar pull-out faucet with a 7 or 8 inch reach?
Asked by: Lee
Hi Lee, The model 9959-DST is the smaller version Trinsic Bar/Prep faucet. The faucet has a reach of 6-1/2". Here is a link to the spec sheet for both models. http://www.deltafaucet.com/customersupport/documentation/9959-dst.html?document=ts&fromDetailArea=kitchen&documentIndex=0#flashWrapper Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2015-01-09

Does the Faucet rotate / swivel at the base?

Or is the angle that it is installed in, the permanent angle that it remains.
Asked by: rmichaud
It swivels and if fully mobile.
Answered by: bluefelt
Date published: 2018-07-11

Is there a parts list? I need the clip to connect the pull out hose to the faucet

Asked by: JClark
Hello JClark, Thank you for your question. I have included the Parts Diagram for this Delta Trinsic Pull-Down Kitchen 9159-DST faucet model The Hose Clip part number is RP60911. https://media.deltafaucet.com/PartsDiagram/DPD-K-9159-DST.pdf Best regards, Tanya
Answered by: Delta Faucet
Date published: 2018-10-31

How do you remove the buttom on the handle to then tighten the screw?

The handle of my faucet is very loose. I can't seem to find something to use to pop the screw "cover" off. What do you all suggest we use to remove that cover and then get in to tighten the screw?
Asked by: Courtney
Hi Courtney, Thank you for your question. I'm sorry for any inconvenience! You can carefully remove the button cover using any tool with a point such as a nail file. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-06-02

For stone counter tops. What size does the opening need to be?

I'm having new stone counter tops installed in my kitchen. I'm having a company come over to take measurements. I want to let them know what size hole or opening to make on the counter to install this particular faucet, which would be a single hole application. I would be installing a farmhouse sink in the kitchen and therefore I need to install the faucet on the counter. Thank you
Asked by: John
Hi, John! Thank you for your question. The measurement for your hole size should be 1 1/4" to 1 1/2". Here is the link to our technical specifications for this faucet: https://media.deltafaucet.com/SpecSheet/DSP-K-9159-DST%20Rev%20E.pdf Best Regards, Rosanna
Answered by: Rosanna
Date published: 2017-02-03

Other than price, what is the difference between Trinsic & Trinsic Pro? Both have same model #.

Asked by: Deb1954
Thank you for your question, Deb1954! The Trinsic model, 9159-DST is the standard pull down kitchen faucet model. The Trinsic Pro version is actually model number 9659-DST and has a coiled spout that can be removed from the arm so that you can point the sprayer in any direction. The internal 70" pull-out hose can also be extended from the end of the coiled spout for additional reach. https://www.deltafaucet.com/product-comparison?modelNumber=9159-DST&modelNumber=9659-DST Best regards, Edward
Answered by: Delta Faucet
Date published: 2018-06-08

Will faucet work with a tight backsplash

I have about 2" between the center of my hole and the backsplash of my counter. I was wondering if the faucet would still work in this tight space. For example, does the handle operate only in a pull down fashion or does it require space to push the handle back to turn on either the hot or cold water. Thanks.
Asked by: Dweezle64
The faucet works in pull down only. It is in the off position in the picture, but it moves to half way down to be on hot fully. You move the faucet handle to the right to turn it on and it only moves about an inch or less to the right to be on full force. The answer is yes, you can use this in a tight spot. The faucet does not operate back at all, all the movement in the handle is down and to the right.
Answered by: mitzi421
Date published: 2014-07-19

What is the purpose for the min 2.5" clearance

What is the purpose for the min 2.5" clearance from the center of the faucet to the backsplash? It seems it wouldn't be for the faucet handle since it moves out and forward, not backward. I have about 2" clearance and want to get this faucet but am confused if the 2" clearance would be enough for the faucet to be installed correctly and function properly.
Asked by: kyla
Dear Kyla, Thank you for your question. The Delta Trinsic Kitchen Pull-Down 9159-DST faucet has a recommended minimum 1 1/2" (38 mm) clearance to the back splash, due to the spout being able to swing 360 degrees. Best regards, Tanya
Answered by: Tanya
Date published: 2018-09-05

can you vary the water flow on this faucet by moving the handle lever. If not is there a similar model ?

Asked by: Shik
Yes, you can vary the water flow be aware that it is a lot easier to pull out open the faucet, you need the patience and small hands to open it gently.
Answered by: Iknow
Date published: 2015-02-28

What is the recommended sink depth for #9159 - DST faucet

Asked by: Anne
Dear Anne, Thank you for your question. Delta does not have any sink depth recommendations for installing the Trinsic kitchen faucet 9159-DST model or any of our other models. Best regards, Tanya
Answered by: Tanya
Date published: 2016-09-03

Can this product be used outside?

We have an unprotected BBQ area and we want to install this sink next to the BBQ grille. Can this product be used outside?
Asked by: ADeschamps
Hi ADeschamps, Thank you for your question. This faucet can be used in an outdoor sink. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-05-11

What is the pull down sprayer head and hose made out of? Is there a ball joint between the hose and the sprayer?

Asked by: Nancy
Thank you for your question, Nancy. The hose and wand assembly are non-metallic. The connection does not have a ball joint. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2016-11-23

what excusion do i need to cover 2 other holes 1 on each side

Asked by: vernon
Thank you for your question, Vernon. The Delta Trinsic Pull-Down Kitchen faucet comes with everything needed for a single hole installation. For a three hole 8" installation, you will need the RP64070 escutcheon plate. https://media.deltafaucet.com/SpecSheet/DSP-K-9159-DST%20Rev%20E.pdf https://www.deltafaucet.com/parts-product-detail?modelNumber=RP64070 Best regards, Tanya
Answered by: Delta Faucet
Date published: 2018-07-31

Does it ship for either one hole or three hole sink, I haven't decided yet. Must I determine b4 ordering.

Asked by: Dave
Thank you for your question, Dave. The faucet comes with everything needed for a single hole installation. For a three hole 8" installation, you will need the RP64070 escutcheon plate. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP64070 Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2016-12-21

What is the difference between aerated stream and spray?

Asked by: AMR Ar
Hi, AMR Ar! Thank you for your question. The Trinsic 9159-DST sprayer assembly does have two modes, spray and stream. The spray mode is a shower-like spray, while the stream mode is a straight stream. Here is a link to a video to show an example of this: https://media.deltafaucet.com/elvis/Video/PRODUCT_9159-DST.mp4 Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2018-03-01

Does anyone know the how far the hand spray extends? I'm looking for one that extends at least 24".

Asked by: CMMH
Once the 54" hose that it comes with is installed, how much of that hose can be extended from the faucet? If I substitute it with the 62" hose, are you saying that it will only extend 18-22" from the faucet? I am looking for a faucet that has approx. 24" extension to reach cooktop next to sink. Thank you.
Answered by: CMMH
Date published: 2018-04-11

How do I adjust the temperature on a single handle faucet like this?

I have one in a new house we bought. It starts out cold but soon turns to hot. We can't figure out how to adjust the temp.
Asked by: Mark
Hi, Mark! Thank you for your question. You will want to make sure to move the handle away from the faucet to turn on the water. When the handle is out, the water should be all cold. When you move the handle closer to you, the water should get warmer until the handle is towards you, it should be at the hottest position. Best Regards, Rosanna
Answered by: Rosanna
Date published: 2017-04-27

Im trying online to registered my new Faucet but not having any luck doing it. can you please HELP?

I bought a Delta Model 19933-SD-DST from Lowe's in Prescott,Az on 9/11/2016 and i just would like to register but your system is not very friendly. Thanks for the Help.
Asked by: Marion
Dear Marion, Thank you for your question. I have registered your Delta faucet 19933-SD-DST model for you. Also, we ask that you hold onto the warranty/installation paperwork, that came with the faucet and a copy of your original receipt or proof of purchase for any warranty claims in the future. Best regards, Tanya
Answered by: Tanya
Date published: 2016-09-17

what is the different between the pull down Bar faucet and the kitchen

Asked by: dena
Hi, Dena! Thank you for your question. The Delta 9159-DST faucet is a full-size kitchen faucet while the Bar/Prep faucet is a smaller version of the 9159-DST faucet. Here is a link to the technical specifications sheet to show the different measurements: https://media.deltafaucet.com/SpecSheet/DSP-K-9159-DST%20Rev%20E.pdf Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2019-03-12
  • y_2019, m_7, d_15, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.12
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_107
  • loc_en_US, sid_9159-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 75ms
  • QUESTIONS, PRODUCT