Trinsic®

Single Handle Pull-Down Kitchen Faucet

Download Image

9159-DST is rated 4.2 out of 5 by 159.
  • y_2019, m_11, d_12, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_159
  • loc_en_US, sid_9159-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 69ms
  • REVIEWS, PRODUCT
  • Delta MagnaTite Docking holds spray wand firmly in place
Finish: Chrome
List Price*: $418.05
Base Parts
9159-DST
List Price*: $418.05
Configurable Parts
Delta® MagnaTite® Docking uses a powerful integrated magnet to pull your faucet spray wand precisely into place and hold it there so it stays docked when not in use. Delta® faucets with DIAMOND™ Seal Technology perform like new for life with a patented design which reduces leak points, is less hassle to install and lasts twice as long as the industry standard*. Kitchen faucets with Touch-Clean® Spray Holes allow you to easily wipe away calcium and lime build-up with the touch of a finger. You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty. *Industry standard is based on ASME A112.18.1 of 500,000 cycles.
  • MagnaTite® Docking uses a powerful integrated magnet to snap your faucet spray wand precisely into place and hold it there so it stays docked when not in use and doesn’t droop over time
  • Soft, rubber Touch-Clean spray holes allow you to easily wipe away calcium and lime build-up with the touch of a finger
  • DIAMOND Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
  • Everything you need is together in one convenient box, including integrated InnoFlex PEX supply lines
  • 1 or 3-hole 8" installation
  • Optional escutcheon available for purchase separately
  • ADA Compliant
  • The high-arc, gooseneck design swivels 360 degrees with a 20-in. retractable hose for added convenience during everyday kitchen tasks

Installation Information


1 or 3-hole 6" or 8" installation


  • Escutcheon: Optional Escutcheon Available
  • Flow Rate: 1.80 gpm @ 60 psi, 6.8 L/min @ 414 kPa
  • Spout Height: 15-11/16"
  • Spout Length: 9-1/2"
  • Deck to Outlet: 8-7/16"
  • Fittings Type: 3/8" compression fittings
  • Deck Thickness: 2.5"
  • Supply Lines: Included InnoFlex® Pex-C Supply Lines
  • Valve Type: Euromotion DIAMOND Valve
Rated 4 out of 5 by from Like it a lot I had my new Delta Trinsic faucet installed nearly a month ago and I'm very happy with it. The only complaint I have is that it doesn't reach as far into my large porcelain sink as my previous faucet did. A minor complaint, admittedly.
Date published: 2019-11-06
Rated 3 out of 5 by from Nice Faucet but it is leaking from the supply line The faucet was working fine for a couple of years and then I notice water in the bottom of the cabinet Looks like it is dripping from where the supply lines enter into the facet body What is the fix for this leaking problem This facet is a product that my home builder had chose for our new house
Date published: 2019-11-04
Rated 5 out of 5 by from Love it!!!! I have Had my faucet for 2 1/2 years now and I love it. Still looks and works like it was new.
Date published: 2019-10-27
Rated 5 out of 5 by from Ease of install Replaced a 20 year old faucet and sink. The delta unit was so easy to install and after a month, love it’s function! Nice water flow and it looks so clean. I’ve had delta faucets in my home for many years and have had NO issues with them. I highly recommend this unit and any with the delta name.
Date published: 2019-10-27
Rated 5 out of 5 by from Beautiful and functional Have had other semi professional faucets and they are not better than this one. Simple beautiful design and easy to use
Date published: 2019-09-22
Rated 5 out of 5 by from Touch incredible We've had this Faust for awhile and finally got it installed. Love it. The color is awesome (black stainless) the touch feature is great.
Date published: 2019-09-21
Rated 1 out of 5 by from Horrible Mildew Smell After 9 Months - Bad Aerator After 9 months we started noticing a horrible smell when using the facet. Originally we thought it was the water and called the local water company, Aquos to check our water. Turns out the water was find in master bath and lower bathrooms. Upon further inspection on 2nd visit, they removed the aerator and water coming through was fine. Would NOT recommend this product, especially with households with children which we have.
Date published: 2019-09-14
Rated 5 out of 5 by from Best faucet ever Just had my faucet installed as part of kitchen Reno. Absolutely stunning. Very solid high end faucet. I am so glad we went with Delta and this faucet. Highly recommend.
Date published: 2019-09-08
  • y_2019, m_11, d_12, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_159
  • loc_en_US, sid_9159-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 12ms
  • REVIEWS, PRODUCT

Im trying online to registered my new Faucet but not having any luck doing it. can you please HELP?

I bought a Delta Model 19933-SD-DST from Lowe's in Prescott,Az on 9/11/2016 and i just would like to register but your system is not very friendly. Thanks for the Help.
Asked by: Marion
Dear Marion, Thank you for your question. I have registered your Delta faucet 19933-SD-DST model for you. Also, we ask that you hold onto the warranty/installation paperwork, that came with the faucet and a copy of your original receipt or proof of purchase for any warranty claims in the future. Best regards, Tanya
Answered by: Tanya
Date published: 2016-09-17

what is the different between the pull down Bar faucet and the kitchen

Asked by: dena
Hi, Dena! Thank you for your question. The Delta 9159-DST faucet is a full-size kitchen faucet while the Bar/Prep faucet is a smaller version of the 9159-DST faucet. Here is a link to the technical specifications sheet to show the different measurements: https://media.deltafaucet.com/SpecSheet/DSP-K-9159-DST%20Rev%20E.pdf Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2019-03-12

How far will the pull-out reach?

Asked by: Chris
Water flow can be very strong, in fact it is hard not to spend so much water. It is not normal to open gently, meaning first you pull out lots of water come out. It doesn't pull out that far to be a problem. I would not recommend the ergonomics of this faucet, I have it and I am stuck with it.
Answered by: Iknow
Date published: 2015-02-28

Is there a water saver disc inside the faucet/spout that can be removed?

Asked by: Steve
Hi, Steve! Thank you for your question. The Delta 9159-DST Faucet does not have a removable aerator assembly in the sprayer. We do apologize for any inconvenience this may cause. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2019-08-21

Is there a similar faucet that is available with a 1.5 gpm flowrate? My project has water usage restrictions.

Asked by: DMeng
Hello DMeng, Thank you for your question. The three Delta Kitchen Pull-Out/Down faucets with a 1.5 GPM at 60 PSI are models 9192-DST, 4153-DST and 4353-DST. https://media.deltafaucet.com/SpecSheet/DSP-K-19992-SD-DST%20Rev%20B.pdf https://media.deltafaucet.com/SpecSheet/DSP-K-4153-DST%20Rev%20C.pdf https://media.deltafaucet.com/SpecSheet/DSP-K-4353-SD-DST%20Rev%20B.pdf Best regards, Tanya
Answered by: Tanya
Date published: 2018-05-15

What is the width (diameter) of the tubing on the trinsic kitchen faucet spout?

Asked by: Brendan
Hi, Brendan! Thank you for your question. The diameter of the spout on the model 9159-DST is 1-3/8". Best Regards, Rosanna
Answered by: Rosanna
Date published: 2017-08-31

i have this faucet (about 1 year old) and the faucet handle is very loose...how to tighten?

Asked by: Susan
Hi, Susan! Thank you for your question. The Delta 9159-DST faucet handle can be tightened by first removing the red/blue temperature indicator. The set screw can be retightened with a 1/8" allen wrench. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2019-01-29

Is there a lower flow aerator available for this faucet? I'd like to reduce splashing.

Asked by: Ktexas
No. I cannot understand why Delta approved this type of aeration in the first place. I constantly splash when trying to rince certain items and it is getting really annoying.
Answered by: plkinsella
Date published: 2017-09-23

What is the warranty on your his faucet?

Asked by: Colin
Hi, Colin! Thank you for your question. Here is a link for the warranty for our Delta faucets: https://www.deltafaucet.com/service-parts/warranty If you are experiencing an issue with your Delta faucet, please contact our Delta customer Service line at (800)345-3358. We are available Monday-Friday, 7am-7pm CST and Saturday, 8am-5pm, CST. Best Regards, Rosanna
Answered by: Rosanna
Date published: 2017-09-11

Kindly provide the overall height and spout heights with and without the escutcheon. Tech specs in "DSP-K-9159-DST Rev E.pdf" for 9159-DST do not provide both--appears only escutcheon measurements given. Kindly clarify.

Asked by: DPaul
Hi, DPaul! Thank you for your question. The escutcheon plate is .45" thick. The 9159-DST faucet with the escutcheon plate is 15 11/16" and without the escutcheon plate it is 15 1/4". Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2018-03-01

Is minimum clearance to backsplash measured from the backsplash to the center of the sink hole or to the edge of the faucet? I have 3" from the backsplash to the center of the sink hole, can I use this faucet?

Asked by: mzack
Thank you for your question, mzack! The recommended clearance to the back splash is 1 1/2" (38mm) is measured from the center of the faucet or handle. https://media.deltafaucet.com/SpecSheet/DSP-K-9159-DST%20Rev%20E.pdf Best regards, Edward
Answered by: Delta Faucet
Date published: 2019-08-17

We have one of these faucets installed in our office and recently the flow on the hot water side is greatly reduced almost to a trickle. The hot water supply valve is wide open. Please advise as to the best option for troubleshoot this problem.

Asked by: craig1961
Hi, craig1961! Thank you for your question, and I am sorry to hear that you are experiencing low flow from your Delta faucet. Over time, common water debris will settle in the house supply lines. Anytime the water is shut off to a portion of the home, this debris can become dislodged and will move through the pipes to be caught by a faucet. Local construction or the changing of the seasons can also cause this. Flushing the supply lines through the unit should remedy this situation. To flush the unit, we recommend the following: Start with the easy stuff: Remove your aerator, wand or hose to check the flow through the unit without that part installed. If the flow is good, the piece you’ve removed is where the issue is. Soaking the part in a 50/50 mixture of white vinegar and water could help remove any particles or debris blocking the flow. If the water does not have a good flow, the problem could be in the faucet. Next, check the supply lines for debris: Turn the supply off to both the hot and cold-water lines. Once off, turn the handle on the faucet to the on position and leave it there to bleed the lines of any excess water. Next, disconnect the hot water supply line and place it inside of a bucket. Once the line is securely positioned into the bucket, turn on the cold-water supply. Since the handle was left in the on position, the water will flow up the cold supply line, through the faucet cartridge and back down the hot water line into the bucket. Leave this flowing for at least 30 seconds. After flushing, reconnect the hot water line and repeat this process with the cold-water line to ensure all particles have been removed from both supplies. If this does not fix the issue, please contact us back. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2018-03-28

What is the diameter of the faucet neck?

Asked by: Estana
Hi Estana, Thank you for your question! The spout is 1 1/4" in diameter. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2016-06-30

Considering buying this faucet for our new home, but have serious concerns about the leaking under the sink that I'm reading about on the reviews. Has Delta addressed this issue or should I consider another model? What about durability of plastic part?

Asked by: Laurie123
Hi, Laurie123! Thank you for your question. Please know that all of our products undergo rigorous tests to ensure long-lasting use and are made with high-grade materials. If you have any questions or need help, please feel free to contact our customer service department at 1-800-345-3358 or email us at customerservice@deltafaucet.com. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2018-06-30

How do I tighten the handle ?

Asked by: Julie64
Thank you for your question, Julie64! The handle on the model 9159T-DST faucet is held on by a set screw which is located underneath the button opposite the handle lever. You will need to pry off this button to access the screw that uses a 1/8" allen wrench to tighten the screw onto the cartridge. Best regards, Edward
Answered by: Delta Faucet
Date published: 2018-11-13

Is SprayShield available for this? Trinsic Model#: 9159-DST

Asked by: TomL
Thank you for your inquiry, TomL! The Delta Trinsic Pull-Down Kitchen 9159-DST faucet model is not designed with the ShieldSpray Technology. Best regards, Tanya
Answered by: Tanya
Date published: 2018-08-13

Does this product swivel?

Asked by: joannesp
Hi, Joie! Thank you for your question. The Trinsic Single Handle Pull-Down Kitchen Faucet (9159-DST) spout assembly does swing 360 degrees. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2018-06-02

Can the spout of a model 9159T-DTS be removed from this faucet ?

Asked by: Tim W
Hello, Tim W! Thank you for your question. The 9159-DST has a removable spout assembly. To remove the spout, first push in the small button at the back of the spout assembly. At the same time the small button is pushed in, twist and pull the spout assembly up and off of the base of the faucet. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2018-06-07

For the 9159-DST & 9959-DST, is there a nozzle option that doesn't have a pullout hose or a nozzle head option without the sprayer and only aerator. Are there other solutions, not listed, to achieve this?

Asked by: Aaron
Hi, Aaron! Thank you for your question. We do not have Delta Trinsic faucet that does not have pull down sprayer assembly. We also do not have sprayer assemblies that have just the stream mode option. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2019-01-18

Can I attach a water filter to this faucet?

Asked by: Akko
Hi, Akko! Thank you for your question. We do not recommend to install a water filter to the Delta 9159-AR-DST Faucet sprayer assembly, as potential pressure fluctuations during water filter operation may result in the hose rupturing. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2019-10-09

Can this item be shipped to Brooklyn NY 11237.

Asked by: wbcIII
Hi, wbcIII! Thank you for your question. The Delta 9159-BL-DST faucet may not be shipped to Brooklyn, NY 11237 as it has a flow rate of 1.80 GPM @ 60 PSI. The maximum flow rate to be within the NYC Green Code is 1.5 GPM @ 60PSI. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2019-04-26

Is there a particular cleaning product I should use so as not to damage the finish? I have the brass/champagne bronze finish.

Asked by: Becca
Hi there Becca, Thank you for your inquiry! A comprehensive list of cleaners is impossible to recommend because of the variety of materials that are a part of our many models of faucets. What may be fine for a spout may damage a handle. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel. Stubborn hard water spots are best avoided by this daily regime. If extra measure is needed, a solution of 50% white vinegar (never Apple vinegar) could be used by wiping, spraying or soaking. Caution: Vinegar can permanently damage porous rock surfaces such as granite or limestone countertops. Use extreme care if such a surface is in the vicinity. To soak a faucet or part still on a faucet: 1. Mix white vinegar and tap water to a half and half proportion. 2. Put a rag or towel in the solution to soak it up. 3. Wrap the rag or towel around the part. 4. Let sit for up to an hour or so. 5. Use the rag or a clean, soft toothbrush to scrub the remaining hard water buildup. o Avoid harsh abrasives or polish o Avoid bleach-based cleaners o Avoid industrial cleaners and abrasive cleaners, such as those used for toilet bowls, green Scotch-Brite heavy duty scrub sponges, Scrubbing Bubbles Bathroom Cleaner and Lysol Basin Tub, Soft Scrub, and Tile Cleaner. o Avoid products that state on the label that they remove tarnish and rust, and those containing hydrofluoric, hydrochloric and/or phosphoric acids and caustic agents. o Because cleaning formulas can change without notice, Delta Faucet Company does not endorse any specific cleaner. Best regards, Tanya
Answered by: Tanya
Date published: 2018-05-07

does this Trinsic faucet have an aerorator - that softens the stream when not on spray mode?

Asked by: gary
Hi Gary, Thank you for your question. The model 9159-AR-DST does have an aerator that is part of the wand assembly that controls the flow of water when the faucet is in stream mode. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2014-11-24

I would like to purchase this faucet as a replacement for my current one.  I currently have 3 holes drilled and will need to cover the two I don’t need with this faucet.  Do you have hole.covers? Coordinating soap dispenser?

Asked by: pamdem
Hello, pamdem. Thank you for you for your question! The RP64070 Escutcheon Plate will work with this faucet for a 3-hole 8" installation. Otherwise, you may also use a soap/lotion dispenser such as the RP1001 or the RP3816 Hole Cover. RP64070 https://www.deltafaucet.com/parts-product-detail?modelNumber=RP64070 RP1001 https://www.deltafaucet.com/parts-product-detail?modelNumber=RP1001 Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2018-10-11

The distance from the center line of the 9159-DST to a back splash is shown as 1-1/2". Same dimension for the 9159T-DST is shown as 2-1/2". Which is correct?

Asked by: Cheshire
Hi, Cheshire! Thank you for your question. The Delta 9159-DST faucet has minimum clearance to back splash of 2 1/2" (64 mm). Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2019-06-14

Is the Trinsic faucet CSA Approved?

Asked by: Meg
Hi Meg, Thank you for your question! The model 9959-DST is CSA certified. Below is the link to the technical specification for the unit. This provides information on what codes it complies with. http://www.deltafaucet.com/customersupport/documentation/9159-ar-dst.html?document=ts&fromDetailArea=kitchen&documentIndex=0#flashWrapper Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2016-03-28

With the handle installed on the right side in the picture, does it just operate forward for temperature; or both forward and backward?

Asked by: Ron
Hi Ron, Thank you for your question! With the faucet installed with the handle facing the right the handle will rotate forward. Pulling the handle out will turn the unit on and put out cold water and when the handle is pulled forward you will get hot water. Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2016-03-29

Hi there, Can you please confirm if this tap is sold in Ireland or the UK? I’ve looked at hundreds others but keep coming back to this one!! Would love it for the kitchen in our new house here in Cork. Many Thanks, Miriam 

Asked by: Mirs
Hi, Miriam! Thank you for your question. We do recommend to contact our International Department via email at intlservices@deltafaucet.com to inquire if this faucet is available in Ireland or the UK. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2018-02-12

Is the Champagne Bronze tap sealed so the color remains as it looks in the picture or will it wear naturally over time and have a rustic look. 

Asked by: monicat
Hello Monicat, Thank you for your question. All our finishes will have a protective coating to help the finish last a lifetime. We recommend specific cleaning and care instructions in order to keep this faucet look new for a long as possible. https://www.deltafaucet.com/design-innovation/inspiredliving/how-to-clean-a-faucet Best regards, Tanya
Answered by: Delta Faucet
Date published: 2019-02-18

If I purchase online to Hong Kong, any international warranty

If I purchase online to Hong Kong, any international warranty If warranty service wanted in Hong Kong. How can we contact Deltafaucet from my country? Thanks
Asked by: David
Thank you for your question, David. Our Lifetime Limited Warranty applies to faucets installed in the United States of America, Canada and Mexico. We do not send warranty parts to other countries. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-11-13
  • y_2019, m_11, d_12, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.1
  • cp_3, bvpage2n
  • co_hasquestionsanswers, tq_114
  • loc_en_US, sid_9159-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 83ms
  • QUESTIONS, PRODUCT