Does the check valve have to be straight up or can it be installed horizontally?
Thank you for your inquiry, JakeUSMC! The check valves should be installed straight up as shown in the Maintenance/Installation document link, below, for the Delta Leland Bar/Prep Touch2O 9678T-SP-DST faucet.
Date published: 2018-04-17
The head of this faucet holes is stooped up, you said to soak it in white vinegar and water, you didn't say for how long and is there a way to open it up to clean it out? Need an answer asap please.
Thank you Lena Pittman
Thank you for your question The sprayer assembly can be soaked in a solution of 50% white vinegar and 50% water mixture for an hour or even overnight!
Date published: 2017-10-16
What is the part number for a 4" center (approx. 6" long) escutcheon plate that matches a Delta Leland 9678T -ST-DST faucet with Spotshield finish? And where can I order one?
Thank you for your inquiry, Chuck! The Delta Leland Bar/Prep 9678T-SP-DST faucet does not have a smaller escutcheon plate designed or available for it. However, this unit does have an optional escutcheon plate RP47274SP for this unit that measures at 10-3/4" .
Date published: 2018-08-26
How to clean the sprayer?
We are having issues with the Leland series bathroom faucets and the aerator clogging up from our well water. You were so gracious to send the tool I was missing to remove the aerator on my 3 bathroom faucets so I can clean them out. All working like new again. So just to see the same tools works on this kitchen sink, removed and cleaned out much better water flow. My question is how do you clean out the sprayer part of the Pull Down faucet? Also on the spa tub Leland faucet the parts list does not show any way to take off the aerator to clean it, does it need a special tool like the others?
Thank you for your question. You can clean the wand by unscrewing it from the hose to check the back. You can soak the head in a 50/50 white vinegar and water solution and flush backwards through it with water.
The high arc Leland Roman Tub Faucet T2775 uses the stream straightener, which takes a wrench tool, RP52593. The stream straightener on lower spout model T2778 will unscrew by hand.
Date published: 2016-01-07
Can the touch20 technology be hard-wired instead of using batteries?
Thanks for your question!
If you have a touch faucet manufactured in 2015 or after, or you have the Generation 3 Solenoid, you will be able to use the EP73954 power supply to connect your Touch 2.0 Technology Faucet to the house electrical current.
I hope this helps!
Date published: 2016-03-04