Allora®

Single Handle Pull-Down Kitchen Faucet

Download Image

989-AR-DST is rated 4.2 out of 5 by 92.
  • y_2019, m_5, d_25, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_92
  • loc_en_US, sid_989-AR-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 61ms
  • REVIEWS, PRODUCT
  • 1 or 3-hole installation
  • Delta MagnaTite Docking holds spray wand firmly in place
  • Backed by Delta Faucet's Lifetime Limited Warranty
Finish: Arctic Stainless
List Price*: $486.55
Base Parts
989-AR-DST
List Price*: $486.55
Configurable Parts
Delta® MagnaTite® Docking uses a powerful integrated magnet to pull your faucet spray wand precisely into place and hold it there so it stays docked when not in use. Delta® faucets with DIAMOND™ Seal Technology perform like new for life with a patented design which reduces leak points, is less hassle to install and lasts twice as long as the industry standard*. Kitchen faucets with Touch-Clean® Spray Holes allow you to easily wipe away calcium and lime build-up with the touch of a finger. You can install with confidence, knowing that Delta faucets are backed by our Lifetime Limited Warranty. *Industry standard is based on ASME A112.18.1 of 500,000 cycles.
  • MagnaTite Docking uses a powerful integrated magnet to snap your faucet spray wand precisely into place and hold it there so it stays docked when not in use and doesn't droop over time
  • EZ Anchor mounting allows for installation from above the deck, with no need to tighten it under the sink, for a secure fit which prevents loosening over time
  • Soft, rubber Touch-Clean spray holes allow you to easily wipe away calcium and lime build-up with the touch of a finger
  • DIAMOND Seal Technology is less hassle to install and helps your faucet perform like new for life, reducing leak points and lasting twice as long as the industry standard
  • Everything you need is together in one convenient box, including integrated InnoFlex® PEX supply lines
  • 1 or 3-hole 8" installation
  • ADA Compliant
  • High-arc pull-down swivels 360degrees
  • 62 in. long hose provides outstanding reach

Installation Information


1 or 3-hole 8" installation


  • Flow Rate: 1.50 gpm @ 60 psi, 5.7 L/min @ 414 kPa
  • Spout Height: 15-9/16"
  • Spout Length: 9-7/8"
  • Deck to Outlet: 7-3/4"
  • Fittings Type: 3/8" compression fittings
  • Deck Thickness: 2.5"
  • Supply Lines: Included InnoFlex® Pex-C Supply Lines
  • Valve Type: DIAMOND Seal Valve
Rated 5 out of 5 by from 2 Months Now We brough it 2 months ago because we had the first one before!! When we remodel our kitchen 11 yrs ago. The old faucet ware out in side and couldn't replace the parts. We like the style of the faucet!!!
Date published: 2019-03-25
Rated 5 out of 5 by from Replace the same faucet Replace the old faucet(14yrs old) because we have hard water. The old one rusted out were the washer and springs are. The new facuet work a lot better since we had it put in!!!!!
Date published: 2019-02-26
Rated 1 out of 5 by from from warm to super hot and leaking what you pay is what you get - not correct here. Paying this amount of money to get a faucet which goes from warm to hot, it takes good adjustment to get to right temperature. We put this in custom home we have, in 3 years it started leaking.
Date published: 2019-02-01
Rated 3 out of 5 by from nice faucet if you don't use it heavily Small design flaw in that it allows water to enter under the valve assembly cap and over time it makes the bonnet almost impossible to remove. A rubber seal would help keep the water out. Also the attachment hole of the handle to the valve assembly deteriorated and the wobble of the metal handle removed the finish on the cap that is not metal.
Date published: 2018-03-19
Rated 4 out of 5 by from Good product. Durability concerns Faucet works really well and I like the design. My only concern is that over the two years that i've owned it I have seen rust where the head of the unit connects to the magnet. Not sure what is going on but I never would have expected that to happen at all.
Date published: 2018-03-17
Rated 2 out of 5 by from Leaky faucet/Faulty Sprayer I am among those that have written prior. Leaky, on/off valve has a mind of its own, has to be just in the right spot to stop the annoying drip, drip, drip. Sprayer not working properly on the spray function, partially full, partially spray when using the sprayer. Disappointing for an expense faucet
Date published: 2018-01-31
Rated 3 out of 5 by from Allora Faucet Faucet will not shut off without working the faucet handle or it drips. I bought the faucet from York Corragating, York, PA (not a big box company) and it was installed by a licensed plumber. Disappointed.
Date published: 2017-11-24
Rated 4 out of 5 by from Really nice faucet, but it no longer turns off unless handle's in a very specific spot We really like the faucet's features and looks, but have same problem as Noblepower. In last couple of months, the handle has become very sensitive to "off" position and, otherwise, will drip. Advice appreciated. Thanks.
Date published: 2017-10-29
  • y_2019, m_5, d_25, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_92
  • loc_en_US, sid_989-AR-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 11ms
  • REVIEWS, PRODUCT

How do you tighten it? It's coming loose at the base

Asked by: Karen
Hello Karen, Thank you for your question. To tighten the faucet, you would need to access the screws for the EZ Anchor mount. First disconnect the hose from under the sink by removing the clip, then pull out the hose from above the sink. Lift firmly on the spout to remove it (if there is a gray button on the back of the spout, press it in while lifting the spout). Insert the EZ Bar or a screw driver into the holes of the brass tube that the spout attaches to. Turn counter-clockwise to loosen the faucet from the EZ Anchor to reveal the screws. Please note that a previous version of the faucet was mounted with a nut and bracket under the sink. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2018-06-26

I need a replacement soap bottle for my year old Allora soap dispenser

I heard an unidentifiable thud, and started looking around the kitchen to see if I could find what may have caused the noise. I didn't find anything that night ,however the following morning I did find dish detergent ooze coming out onto the floor in my kitchen.The neck of the plastic bottle that contains the detergent had snapped- off . There does not appear to be a part number on my parts"summary" so that I may purchase the plastic bottle only,as the dispenser is intact ,aside from the now useless plastic. As I currently own 8 Delta faucets, and we are not finished with the remodel, and having displayed such loyalty is there any possiblity that I may obtain another bottle to once again make use of the dispenser? Sometimes service is what separates the A companies from all the rest. Thank you . Vickie Allen
Asked by: Boss
Vickie, to follow up with this information, the soap dispenser is on order to ship to your location. Please let us know if you have any additional questions on your Delta Faucet Allora Soap Dispenser.
Answered by: Delta
Date published: 2013-10-22

Is the o-ring only on the flex hose that screws into the spray wan?

Model 989 AR DST
Asked by: Smokie
Hi Smokie, Thank you for your question! Yes, the O-ring is on the hose where it threads into the back of the spray wand. Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2016-04-18

how to tighten loose lever on 989-dst delta faucet

Asked by: Char
Hello Char, Thank you for your question. To tighten the handle of the Allora Kitchen Pull-Down 989-AR-DST faucet, we would recommend removing the red/blue button on the handle and using a 1/8" Allen wrench. Please feel free to call, email, or message us on social, if there is anything else you need. Best regards, Tanya Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet
Answered by: Delta Faucet
Date published: 2019-01-03

Can the handle on the Allora be mounted facing forward?

My wife is left-handed... I am right-handed. If the control handle can be mounted so it faces the the front of the sink, we can both use it with equal ease. But the head must still be able to swing fully to the left, and to the right. Is that possible?
Asked by: Dave
Check that neck swivels enough to work that way. I'm thinking it should. If so, then I don't know why you couldn't mount the control handle in the front. We had interference with the window sill over the sink so our control handle is mounted slightly forward and works without a problem.
Answered by: Oshow
Date published: 2017-01-14

Our kitchen water pressure was good until we installed a new hot water tank, does doing that decrease your pressure?

Asked by: Lisa
It shouldn't. I suspect you have some debris in the line between the tank and your faucet (maybe the aerator?) that was stirred up while replacing the water tank. Another possibility is that if ALL your faucets were affected, maybe the valves to and/or from the water tank are not fully open.
Answered by: dad5084
Date published: 2017-01-14

2 Questions on Operation

1. Which way do you move the side-mounted lever handle to turn the water ON - Up or Down? 2. Does the pull down spray wand have a water shut-off button? That is, can you shut the water flow completely OFF from the pull down?
Asked by: GrumpyGeezer
Down, no the wand doesn't turn off the sprayer. However it does go from a stream to a spray by using the button on the spray head. And it's easy to install.
Answered by: Joe22
Date published: 2017-01-14

Do all 989-DST faucets come with EZ Anchor?

Asked by: JMac
Thank you for your question, JMac! Actually not all 989-DST models offered the EZ Anchor mounting. Depending on when this was installed, you may have a metal mounting bracket or you will see the black EZ Anchor assembly below the counter. https://media.deltafaucet.com/QuickstartDiagram/QS-72848%20Rev%20E.pdf Best regards, Edward
Answered by: Delta Faucet
Date published: 2018-12-24
  • y_2019, m_5, d_25, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_19
  • loc_en_US, sid_989-AR-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 67ms
  • QUESTIONS, PRODUCT