Single Handle Pull-Down Bar/Prep Faucet
Victorian®
Model#: 9955-DST
Victorian Single Handle Pull-Down Bar/Prep Faucet is rated
out of
5 by
10.
-
Water-Efficient
-
No-Lead Compliant
- Exclusive MagnaTite®spray head docking ensures a snug fit of the wand
- Pull-down spout swivels 360 degrees for easy access to all areas
- 32" supply lines below the deck included
- 59" long hose provides a 24" reach
MagnaTite® Docking
DIAMOND™ Seal Technology
Touch Clean
Installation Information
2-hole 4" installation
- Flow Rate: 1.80 gpm @ 60 psi, 6.8 L/min @ 414 kPa
- Spout Height: 14"
- Spout Length: 6-11/16"
- Fittings Type: 3/8" compression fittings
- Deck Thickness: 2.5"
- Supply Lines: Included InnoFlex® Pex-C Supply Lines
- Valve Type: DIAMOND™ Seal Valve
Rated 5 out of
5
by
Lees2 from
We love the faucet
This has been a very good faucet. We've had it for 8 years and have only had a couple of warranty replacement parts needed. Very easy to replace parts and the warranty department was very easy to work with.
Date published: 2017-07-19
Rated 5 out of
5
by
Terry79 from
Great all around.
Totally satisfied. Easy to install. Looks great. Super smooth operation. Pull out nozzle sprayer works perfectly.
Date published: 2017-05-19
Rated 4 out of
5
by
Neena from
Great features and finish
Recently bought for my new home. Love the design and finish. Have not installed yet, but my plumber states good quality.
Date published: 2017-04-11
Rated 5 out of
5
by
Harry25 from
Good design and features - works well
My wife choose the faucet and she is pleased with both the appearance and the features.
Date published: 2016-11-01
Rated 3 out of
5
by
robmyers53 from
Love the faucet, but it drips.
We love our kitchen faucet, but for the second time in less than 3 years it is once again dripping. We had the valve replaced last year while our home was still under warranty. Now in little more than a year it has started leaking again. I have tried to find a valve locally but have been unsuccessful. Will probably have to order one from Delta.
Date published: 2015-11-20
Rated 2 out of
5
by
CLNoble from
Faucet looks great, but drips
We have over 15 Delta Faucets in our home, which was new construction five years ago, we've had no issue with any except the bar prep faucet. It rarely shuts the water off completely on the first and sometimes the second attempt. It was professionally installed so no DIY errors on this one.
Date published: 2014-12-30
dear sirs I have what I belive is a modle #9955-ss-dst Victorian single handle pulldown bar/prep faucet. my situation is the water controller is lose at the counter top. unit is aprox. 10 years old what repair item do I need .
Hi, bBrian!
Thank you for your question. There is a small nut and mounting bracket under the sink that is holding the valve body for the handle. We recommend using a wrench to tighten this. There is a special wrench for this. The part number is RP47030. Here is a link to this part:
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP47030
Best Regards,
Rosanna
Date published: 2018-04-20
Delta Products from big box stores
Is the quality the same if the Delta name in on the faucet whether it comes from Lowes or Home depot, then if it is purchases from you or a local plumbing supplier? I'm on my second Delta Kitchen faucet in 15 years. One was from a plumbing supply company and the last one from Lowes. I had a plumber look at it and he did not think that he could make it work properly.
Hi, Ditner!
Thank you for your question. This faucet, 9955-SS-DST, will be the exact same make and quality if bought from a big box store or a plumbing supply store. There is no difference where you purchase this unit.
Best Regards,
Rosanna
Date published: 2017-08-22
Can I purchase the head only,I already have this model but I want to replace the head
Hi Carter,
Thank you for your question. The wand assembly is available separately as part number RP51478.
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP51478
Best regards,
Jon
Date published: 2017-07-11
I want to replace another faucet set with the Victorian Single Handle Pull-Down Bar/Prep Faucet.
The holes in my sink are 6 inches apart, and I see that the specs on the Delta are 4 inches apart. Can I use it with 6 inches?
Hi ohsharky,
Thank you for your question! This model has 4" minimum spread. It will also work with a 6" installation.
Thanks,
Jon
Date published: 2015-11-23
Accessory inquiry
I am trying to hook up a portable dishwasher to my faucet, but there is no threaded fitting at the nozzle (like in "generic" style faucets). Is there an accessory that would allow me to do this?
Hi Kevin, Thank you for your question. Portable dishwashers and water filters may be connected to any Delta kitchen faucet that is not a Pull-out or Pull-down design. Portable dishwashers should never be connected to Pull-out or Pull-down kitchen faucets due to potential pressure fluctuations during dishwasher operation that may result in rupturing of the hose.
Your model 9955-SS-DST is a pull-down faucet and not recommended to be used with a portable dishwasher.
Thanks,
Dave
Date published: 2018-04-14
Does 9197T-AR-DST swivel at the base or is is stationary?
I just ordered this faucet from a local hardware store and the man is coming to measure the granite. I need to know if this swivels at the base or not for placement in the sink.
Thank you
Hi Suzie, Thank you for your question. The spout on the model 9197-AR-DST swivels a full 360 degrees.
Thanks,
Dave
Date published: 2014-06-23
