How High does the neck reach. Distance from counter to top of neck bend?
Thank you for you question. The Delta 9992T-DST has a spout height of 14 13/32" (366 mm). Here is a link to the technical specifications sheet to show other measurements for this faucet:
Date published: 2018-08-23
Can faucet be used with an escutcheon?
The size of the bar/prep faucet best suits the space in our oral surgery instrument sterilization area, but we will need an escutcheon. Can one be purchased separately and used with this faucet?
Thank you for your inquiry, Jennifer M! The Delta Addison Bar/Prep 9992T-AR-DST faucet is designed as a single only hole installation. However, the RP47274AR can be used with 8" (203 mm) Centers installation.
Date published: 2017-12-19
Can this faucet be used on an under mount sink?
Yes. I don't see any reason why not. The faucet only requires one hole in the counter top. If you have three holes, there is an escutcheon included with the faucet that will allow it to adapt. I currently installed this faucet in a Corian countertop with a seamless Corian sink basin.
Date published: 2017-01-14
Can you use the A/C adaptor?
can you use the A/C adaptor EP73954 with this faucet? or is there another adaptor that works with this faucet?
Yes. That is the A/C adapter listed in the manual as an optional accessory.
Date published: 2017-01-14
which side should the lever go on?
All of your pictures show it on the right, but from a use standpoint, I prefer it on the left due to the fact that I am usually putting something in the sink with my right hand, since I am right handed, and it feels more comfortable using it on the left than on the right. My wife and I are debating this.
Hi Jim, Thank you for your question. The spout on the model 9992T-DST swivels a full 360 degrees so the faucet could be installed with the handle to the left, but it is designed to go on the right. The LED display in the base would face the wall and the handle motion would be cold to the back, hot to the front with the handle to the left side.
Date published: 2015-01-26
Is there a stainless version of this faucet
We have a 9192T-SSSD-DST for main sink and want to add a bar/prep faucet with same finish for our smaller sink, but don't see a stainless finish selection. I don't think the Artic stainless would be the same but not sure. Is there a stainless version like our main faucet? thx
Hi David, Thank you for your question. Unfortunately the (SS) brilliance stainless finish is no longer available on the model 9992T-SS-DST faucet. The (AR) arctic stainless finish is similar but has a blue tint where the SS fiinsh has a more golden tint.
Date published: 2014-12-12
Is the Home Depot version identical to the showroom version?
I have seen reports that the larger "retail stores" (Home Depot, Lowes, etc) version has slightly different finishes to allow different pricing.
Is the Home Depot version similar, or is it identical to the version provided to plumbing specialty stores? I am definitely going with this faucet, I just want to know if I should buy it from a plumbing store instead of Home Depot.
Hi Chris, Thank you for your question. If the model number in this case model 9992-RB-DST is the same at Home Depot and a plumbing specialty store that faucet is exactly the same faucet.
Date published: 2014-04-16
how to adjost duration of flow
for a Delta double handle self closing regulating faucet
Thank you for your question. Delta Faucet model # 9992T-RB-DST is not a double handle self closing regulating faucet. If you do have a two-handle, push-down slow-close faucet, then the way to change the duration of the flow is to turn off the water supply. When the water is off, take off the handles, and adjust the top nut either counter-clockwise or clockwise depending on whether you want to increase or decrease the flow.
Date published: 2013-10-22