- Brass Construction
- Backed by Delta Faucet’s Lifetime Limited Warranty
List Price*:
$79.95
- 90 degree Wall elbow
- Personal shower wall supply
- Can be used for replacement or for new construction installation
- RP32549 and RP3913 Replacement
Special Features
Brilliance® Finish
Installation Information
Rated 5 out of
5
by
DeanTrophyClub from
Shower plumbing elbow
Simple and elegant, completes the handshower installation.
Date published: 2019-01-26
Rated 5 out of
5
by
Denny from
Shower Project
The overall finish and looks of this product completmented the collection I choose the us in my new bath. The finish was outstanding.
Date published: 2018-12-26
Rated 5 out of
5
by
Megan from
Elbow for hand wand
Great product that works perfectly. Matches the trinsic collection perfect. Attaches to the wall easy and the hose was a great fit with all attachments.
Date published: 2017-12-24
Rated 5 out of
5
by
Megan from
Hand Shower elbow
Matches the hand Shower from Delta Trinsic collection perfectly. Works great and attaches to wall easily. It was easy to attach the hose to this elbow.
Date published: 2017-12-24
Rated 5 out of
5
by
Kkho from
Love it!
Fits perfectly with out delta hand shower and rain system
Date published: 2017-09-22
Rated 3 out of
5
by
annie from
Shape?
Function is perfect but why the rounded shape when sold to go with product that is square in design?
Date published: 2017-08-10
Rated 5 out of
5
by
susan from
Best decision
Just bought this part as part of a whole shower system. This part and the others I needed came when promised and installed with ease. My plumber was very happy! Will definitely use your company again!
Date published: 2017-07-18
Rated 4 out of
5
by
Anna M from
Delta 50560 wall elbow
This looks great in my shower! Just the right size.
Date published: 2016-12-13
Is there a part number for the plastic gasket?
Thank you for your question, gr5409! There are no separate repair part numbers for this wall elbow. Please contact us directly if you have questions or need further assistance.
Best regards, Edward
Date published: 2019-04-14
My plumber installed a piece of copper pipe attached to pex. At the top of the copper pipe he installed an elbow 90 degree 1/2 inch copper fitting with tapered threads. Should the tapered thread copper fitting work and seal properly with teflon tape?
Hi, Russ!
Thank you for your question. The Delta 50560-SS Wall Elbow will fit on 1/2" copper fittings with standard threads. We recommend the standard threads be sealed properly with plumber's tape.
Best Regards,
Rosanna
Date published: 2019-07-30
How far away from the corner should it be to allow enough room to rotate in installation?
Hi Doug, Thank you for your question!
You will need to take the length of the entire wall bow in consideration to determine where is needs to be mounted on your wall set up. Below is a link to the technical specifications for the 50560:
http://www.deltafaucet.com/customersupport/documentation/50560.html?document=ts&fromDetailArea=bath&documentIndex=0#flashWrapper
Best regards,
Brandis
Date published: 2017-09-08
My contractor installed the supply elbow with the outlet facing up. Can this be adjusted so it faces down?
Thank you for your review, Jaypro! The wall elbow threads on to a 1/2" (13 mm) iron pipe nipple. This can be unscrewed and threaded on correctly, but please be sure to apply plumbers tape to the pipe thread as per the instructions.
https://media.deltafaucet.com/MandI/43934RevC.pdf
Best regards, Edward
Date published: 2018-07-06
What is this product made of? Plastic?
Also what is the shower bar on the model 57021 made out of? Assuming it's NOT brass?
Thank you for your question. Per the spec sheet (link provided below), the Delta Faucet model #50560 is a solid brass construction.
http://www.deltafaucet.com/customersupport/documentation/50560.html?document=ts&fromDetailArea=bath&documentIndex=0#flashWrapper
Date published: 2013-10-22
Customer wants us to install a diverter and elbow (50560) but wants a cap for the elbow. They do not want a wand at this time but later.
Thank you for your question, SueE! Unfortunately we do not manufacture a cap for this elbow however this model does include a thread-on tool that can be left on as a plasterguard if needed. We would not recommended capping this area to control water flow as the main control valve will do this.
Best regards, Edward
Date published: 2019-04-07
i have a 2 jobs i am installing a 50560 wall elbow on a fiberglass shower on 105 different showers
i need it to end up flush with shower and turned correctly for hose connection ,any suggestions
Thank you for your question. Delta Faucet model # 50560 can easily be installed on your piping. We do not have any "tricks" that we can recommend to make sure that it is turned the correct way.
Date published: 2013-10-22
Observing the plastic gasket, will it be a problem to install the elbow onto a finished tile surface?
This is a Delta 50560-SS supply elbow.
Hi Viic,Thank you for your question!
There should be no issue with installing the 50560 elbow and gasket onto a finished tile.
Best regards,
Brandis
Date published: 2016-07-11
