Does the 72172 push pop up less overflow help vessel sinks to drain like a sink with an overflow?
Thank you for your inquiry! The Delta Push Pop-Up Assembly 72172, can be installed in a vessel sink with no overflow holes. It will still work and drain the same as 72173 Push Pop-Up assembly with overflow holes.
Date published: 2017-09-09
Will this fit with this sink?
Thank you for your question. The 72172-CZ drain assembly fits most standard sinks. Here is a technical specifications list to show the measurements for this unit:
Date published: 2017-09-08
How do you adjust the pop up mechanism
The pop up will not latch in the down ( sealed) position.
Thank you for your question. The pop-up drain assemblies are not designed to hold water for long periods of time. If the water is leaking out of the sink bowl right away, then the water may actually be leaking around the flange and running down the drain. If you push down on the stopper with water in the sink bowl and the water still leaks out of the bowl, then the flange is not sealed properly. I would suggest removing the flange from the sink bowl and applying a large bead of clear silicon to the bottom side of the flange to properly seal the flange with your sink bowl before you reinstall it.
Date published: 2017-08-05
Will this work for the cassidy faucet? And if so, can you get the faucet without the pull-up drain part?
Would like the cassidy faucet to match the towel ring and toilet paper holder but like the push-up drain stopper much better.
Thank you for your question. You may use this pop-up assembly with any Delta faucet if the sink does not have an overflow hole. We make several different models in the Cassidy collection. Only the Vessel and Wall-Mount versions do not include a pop-up assembly. However, you can use this unit instead of the included pop-up assembly. The lift rod will be non-functioning.
Date published: 2017-06-15
Will this work on sinks with 2-Inch outlets
I have a stainless laundry sink (Whitehaus Model # WHLS2424-NP) with a 2" drain hole. Will this pop up work? If not what model delta pop up will?
Thank you for your question! The top of the flange has an outer diameter of 2 3/8", so it should work. For other dimensions, please see the Technical Specifications.
Date published: 2016-12-05
72172 push pop assembly- How do you remove the pop up ( drain) to clean?
Tanks for your question. The stopper will unscrew from the flange for cleaning.
Date published: 2016-11-30
Do you recommend silicone for the 72172-RB pop-up drain less overflow?
Hi, I am installing the 72172-RB. I am testing without silicone and only using the washer gasket under the flange. So far, no leaks. However, do you recommend putting silicone under the washer/gasket (between sink and washer/gasket) prior to adding the flange just to be safer?
Hi Dave, Thank you for your question. You can use the supplied gasket or silicone but we do not recommend using both.
Date published: 2015-02-10
What is the finish material of the 1 1/4" drain pipe?
The image shows the 1 1/4" drain pipe that extends down from the pop up drain assembly, but it looks to be a different finish. I need to have all piping and drain pieces finished in polished chrome underneath the exposed vanity. Can you confirm what the finish of this piece is?
Hi Jason, Thank you for your question. The model 72172 push pop up drain will have a chrome finished tail piece.
Date published: 2014-04-24