- Replaces the battery pack for Delta Touch2O faucets
- Plug into any non-switched 115-Volt outlet in your sink cabinet
- Backed by Delta Faucet’s Lifetime Limited Warranty
List Price*:
$48.65
- Upgrades your Delta Touch2O faucet by replacing the battery pack with consistent A/C power
- Grounded plug ensures safe, reliable operation
- Simple installation for any homeowner eliminates the need for an electrician
- In the event of power loss, faucet remains operational
Installation Information
Rated 5 out of
5
by
ron from
Delta
So far it's good, only had it for week. but from the review it has lots of problems, but my wife like it.
Date published: 2018-10-09
Rated 5 out of
5
by
Genol from
No batteries to replace
I opted to purchase this AC adapter for our new faucet as I didn't feel like removing under the sink to replace batteries. This works great & was installed in 1min. It took longer to find a multi plug adapter. If you have only 1 outlet under the sink and have a dishwasher & garbage disposal plugged in, do yourself a favor in advance. Purchase a $6 GE 6-Outlet Tap, Grounded from Amazon/Lowes/Home Depot/Ace etc.
Date published: 2018-08-06
Rated 5 out of
5
by
SuzyBookz from
Worked Perfectly
So my contractor never plugged in the adapter. Luckily, I decided to do major cleaning in my kitchen and found it. The batteries literally just died. After using a flashlight, I found the box and plugged in the adapter. It worked immediately and no need to keep batteries in the other attachment. Super happy this worked.
Date published: 2018-07-31
Rated 5 out of
5
by
michelle from
A must for the corresponding faucet
I don't have to worry about changing batteries out for my touch faucet. An electrician installed this underneath my sink
Date published: 2018-05-20
Rated 5 out of
5
by
bam from
A must have!
I chose to purchase the power supply in addition to the batteries to operate my Delta touchless faucet because I didn't want to worry about the batteries running low and affecting the operation of the faucet. Super easy to install!
Date published: 2018-02-22
Rated 5 out of
5
by
CKeenan from
Good idea
By adding this to my faucet. I do not have to worry about changing batteries. It always works.
Date published: 2018-02-06
Rated 5 out of
5
by
Santa Grandpa from
Save on batteries
By adding this item to the kitchen faucet we will not need to do anything else under the sink. [This review was collected as part of a promotion.]
Date published: 2018-02-03
Rated 5 out of
5
by
tjcrut from
plug and forget
This is gem is a must for your touch faucet. Why would you risk not having batteries for to replace your faucet when you need them. This product is the perfect example of plug it in and forget it. Constant electricity eliminates the need to keep additional batteries on hand. Super happy with my purchase!
Date published: 2018-02-03
Can thist AC Adapter use the same wiring as the dishwasher? Or does it need separate wiring.?
Hello!
Thank you for your question. Delta A/C Power EP73954 adapter has separate wiring from the dishwasher.
Best Regards,
Rosanna
Date published: 2018-11-01
Under our sink is a typical electrical outlet with two spots to plug into (each with 3 prongs). The garbage disposal is plugged into one of the spots. Can I plus this unit into the other?
Thank you for your inquiry, Mike! The Delta A/C Power EP73954 adapter can be plugged in in the same outlet as a garbage disposal as long as the outlet is not controlled with a switch.
Best regards,
Tanya
Date published: 2018-09-19
We just installed the EP73954 AC adapter and our faucet still does not work unless we have the battery pack installed also. The faucet must still be operating off the battery pack. We are about to return the faucet. Solutions?
Hello Peggy,
Thank you for your inquiry! We recommend to keep the battery pack plugged in while the A/C Adapter is in use, as a back up. The battery pack does not have to be installed when using the AC adapter. However, it is recommended to keep it plugged up in the case, there is not enough power it will not work.
Best regards,
Tanya
Date published: 2018-11-01
I installed the power supply EP73954 to my 9113T-RB-DST, however when take off the battery supply the touch feature doesn't work. Is there a trick? Shouldn't it work without the batteries?
Hi Patrick,
Thank you for your inquiry! We recommend to keep the battery pack plugged in while the A/C Adapter is in use, as a back up. The battery pack does not have to be installed when using the AC adapter. However, it is recommended to keep it plugged up in the case, there is not enough power it will not work.
Best regards,
Tanya
Date published: 2018-07-21
Hi, how do I remove the battery pack and install this plug?
Hi, Tricky!
Thank you for your question. We recommend to keep the battery pack plugged in while the A/C Adapter is in use, as a back up. If you do not want to have the battery pack plugged in at all while using the AC Adapter, simply remove the top 'lid' off of the battery pack to remove entirely.
Best Regards,
Rosanna
Date published: 2018-11-01
I purchased a Touch2o model # 9159T-DST several years ago. Will this power supply work for my faucet? If not what power supply should I get?
I want to add an AC power supply to my faucet but I don't know if my faucet has a Gen 3 solenoid or not.
Please help.
Hi, Bill!
Thank you for your question. To find if you have a Gen 3 solenoid is to look at the sticker on the solenoid. If this starts with "X000", you have the Gen 3 solenoid and the EP73954 will work.
Best Regards,
Rosanna
Date published: 2018-01-25
Can this adapter be used with Ashton Touch2o?
Hi LVD,
Thank you for your question. The EP73954 A/C Power Supply can be used with the Ashton 19922T-SSSD-DST model.
Best regards,
Edward
Date published: 2018-09-30
Should the faucet handle have to be turned on in order for the touch function to work? When I touch the faucet the indicator light lights up but the w
I must turn the water handle on in order for the touch feature to work. I thought the water would come on without opening the valve. It works as long as I turn it on first doesn't seem that it should require turning the faucet on.
Thank you for your question Thomas.
The handle on your Touch model will need to be in the "on" position in order to allow water to flow because both the cartridge and solenoid control the water flow. This allows for independent control with the handle for volume and temperature as well as provide a way to turn the water off for general maintenance and cleaning.
Best regards, Edward
Date published: 2017-08-25
