Metal Drain Assembly - Less Lift Rod - Lavatory
Delta
Model#: RP26533MC
Discontinued
Compare
Favorite
Add To A Project
View my Items
Print
Finish: Matte Chrome
Finish: Matte Chrome
List Price (US $):
$37.25
Installation Information
- Drain Type: Less pop-up
- Supply Lines: Not Included
Do I need plumbers putty to install rp26533rb
Dear Don,
Thank you for your question. In the installation instructions for the RP26533RB Delta Metal Drain Assembly, we do recommend using bead of silicone or plumber's putty on the underside of the flange.
Best regards,
Tanya
Delta Consumer Response Specialist
Consumer Care Phone: (800) 345-3358
Date published: 2016-08-27
Can I buy just the washer and the gasket?
Hi Home Plumber, Thank you for your question!
The part number for the seal and gasket is RP6130. Below is a link to the parts:
http://www.deltafaucet.com/repairparts/details/rp6130.html?showPhotoGallery=false
Best regards,
Brandis
Date published: 2017-01-14
Will this drain assembly fit a sink with a 1-1/2" drain hole
I find that none of the plastic drain assemblies will fit a 1-1/2" hole and am looking for options.
Hi Mike,
Thank you for your question. The threaded portion of the flange is 1 3/8" and the top surface diameter is 2 1/8". This assembly should work with a 1 1/2" diameter drain. However, the depth of the hole must be 1 5/8" to 2 3/8".
Thanks,
Jon
Date published: 2015-10-01
How to connect drain assembly to drain pipe?
I have bought the Delta 521 DST-A and I cannot see how I am supposed to fit the drain assembly to the drain pipe. First of all the drain asembly is a 1.25 inch pipe in diameter and my drain pipe is 1.75 inches in diameter. Also there are no threads on the end of the drain assembly piece so even if I had a connecting pipe how would it attach?. The drain assembly piece comes about 6 inches short of the drain pipe. I don't believe I am missing parts so what parts do I need to purchase at the store?
Hi Cfs,
Thank you for your question. You will need to purchase a slip joint extension tube in either 1-1/4" or 1-1/2". You will also need to purchase a 1-1/2" to 1-1/4" reducing bushing. These are compression style fittings that compress onto the pipe to secure, not thread on. These are available at most hardware stores or home centers, not through Delta.
Thanks,
Dave
Date published: 2013-12-24
