Regarding the RP32529 Aerator assembly, can I purchase the rubber washer and plastic filter insert separately? If so, what are the part numbers and
(Continued) and associated costs?
Hi Mike, Thank you for your question!
The gasket and screw can not be ordered separately. You will have to order the complete RP32529 aerator assembly.
Date published: 2016-03-28
Kitchen faucet aerators - 1.8 gallons per minute or less
City is requiring kitchen faucet aerators of 1.8 GPM or less. Does Delta make an aerator that fits this requirement? If so, can I get an part number? Thanks in advance.
Hi Newbie, Thank you for your question!
The RP32529 2.2Gpm aerator thread size of 15/16"-27 Male thread. We do carry the RP70719 1.8gpm aerator which has the same thread size.
Date published: 2016-03-01
what is the diameter of areator rp32529?
Thank you for your question, forpart. This aerator has a thread size of 15/16"-27.
Best regards, Jon
Date published: 2018-10-11
What is the procedure for replacing the aerator?
I have a reduced flow issue and suspect the aerator is clogged with bits of metal from old pipes. Before I replaced the faucet with the new 16997-SD-DST I would simply unscrew my old aerator and clean it. The aerator does not appear to easily unscrew on the new 16997 so I guess my question would be how to get the aerator out of the faucet?
The only other assembly, with the reduced flow issues on both hot and cold water would be the valve assembly, correct?
Thank you for your question. Delta Faucet model # 16997-SD-DST will have an aerator that should unscrew from the wand by using channel locks. We also recommend flushing the lines to remove any metal bits. This can be done by taking the wand off the hose and letting the water run freely for 1-3 minutes.
Date published: 2014-11-26
can't remove aerator
Delta 467-DST Palo Single Handle Pull-Out Kitchen Faucet
similar to this model, but there are three notches in the plastic around the aerator, and when I rotate the aerator with needle nose pliers(a very tight fit) it just turns and doesn't come out. the aerator is plastic and is round with no flats on the end like the one in the description for this model
Hi wisdomtooth, Thank you for your question. The model 467-DST now ships with a cache aerator and a small blue t-shaped wrench that helps remove and install the aerator. This wrench can clip onto the pex supply lines underneath the sink. You can order the wrench and aerator as RP50815.
Date published: 2015-04-16
Where can I buy an aerator for my Cicero model 468-SD-DST?
The aerator on our Model 468-SD-DST disintegrated. How do I remove the aerator and where can I buy the part? I looked all through your website and could not find the aerator part or the tool to remove the broken pieces.
We really like the faucet but with out the aerator, the water comes out with too much force. Would like to keep this faucet.
HI Tom, Thank you for your question. The aerator for the model 468-SD-DST is not available as a separate item. The entire wand assembly RP44652 will need to be replaced. You can order this item online or at your local retailer/wholesaler that sells Delta products.
Date published: 2014-08-05
Will this fit 15/16 outside thread?
Hi Glenda, Thank you for your question!
The RP32529 2.2gpm aerator has a thread size of 15/16"-27 Male thread.
Date published: 2016-03-21
Do I need to purchase a special tool or wrench to install this aerator part # RP32529? If so, please provide the details! Thanks!!
Thank you for your question, Memphis! The RP32529 can be unscrewed by hand. It may help to use a flat rubber jar opener to help grip the aerator.
Date published: 2019-01-01