Regarding the RP32529 Aerator assembly, can I purchase the rubber washer and plastic filter insert separately? If so, what are the part numbers and
(Continued) and associated costs?
Hi Mike, Thank you for your question!
The gasket and screw can not be ordered separately. You will have to order the complete RP32529 aerator assembly.
Date published: 2016-03-28
Will this fit 15/16 outside thread?
Hi Glenda, Thank you for your question!
The RP32529 2.2gpm aerator has a thread size of 15/16"-27 Male thread.
Date published: 2016-03-21
Kitchen faucet aerators - 1.8 gallons per minute or less
City is requiring kitchen faucet aerators of 1.8 GPM or less. Does Delta make an aerator that fits this requirement? If so, can I get an part number? Thanks in advance.
Hi Newbie, Thank you for your question!
The RP32529 2.2Gpm aerator thread size of 15/16"-27 Male thread. We do carry the RP70719 1.8gpm aerator which has the same thread size.
Date published: 2016-03-01
Does DELTA Aerator replacement part contain new O ring/washer?
Does DELTA Aerator replacement part contain new O ring/washer? The picture of Model #:RP32529 shows a black washer but I want to be sure a new washer is included.
Thank you for your question. The black rubber washer will be included with the aerator.
Date published: 2016-01-04
where can i get a wrench for aerator RP32529?
Thank you for your question! This aerator should unscrew by hand. If it is stuck, please try soaking the spout in a 50/50 white vinegar and water solution for about 15 minutes. It may also help to use a rubber jar opener to grip the aerator.
Date published: 2015-10-21
I have a Delta 579 DST with 2.2 gpm (8.3 L/min). I need a new aerator and key. The faucet is about 6 or 7 years old. Thank you
Hi Kay, Thank you for your question. You have an older version of the 579-DST, the 579-WF. This model uses the RP46117 aerator with a 2.2 gpm flow rate and the RP46245 wrench. Here is link to the parts page for this model.
Date published: 2015-01-22
Where can I buy an aerator for my Cicero model 468-SD-DST?
The aerator on our Model 468-SD-DST disintegrated. How do I remove the aerator and where can I buy the part? I looked all through your website and could not find the aerator part or the tool to remove the broken pieces.
We really like the faucet but with out the aerator, the water comes out with too much force. Would like to keep this faucet.
HI Tom, Thank you for your question. The aerator for the model 468-SD-DST is not available as a separate item. The entire wand assembly RP44652 will need to be replaced. You can order this item online or at your local retailer/wholesaler that sells Delta products.
Date published: 2014-08-05
can't remove aerator
Delta 467-DST Palo Single Handle Pull-Out Kitchen Faucet
similar to this model, but there are three notches in the plastic around the aerator, and when I rotate the aerator with needle nose pliers(a very tight fit) it just turns and doesn't come out. the aerator is plastic and is round with no flats on the end like the one in the description for this model
Hi wisdomtooth, Thank you for your question. The model 467-DST now ships with a cache aerator and a small blue t-shaped wrench that helps remove and install the aerator. This wrench can clip onto the pex supply lines underneath the sink. You can order the wrench and aerator as RP50815.
Date published: 2015-04-16