I have a Delta 579 DST with 2.2 gpm (8.3 L/min). I need a new aerator and key. The faucet is about 6 or 7 years old. Thank you
Hi Kay, Thank you for your question. You have an older version of the 579-DST, the 579-WF. This model uses the RP46117 aerator with a 2.2 gpm flow rate and the RP46245 wrench. Here is link to the parts page for this model.
Date published: 2015-01-22
Does DELTA Aerator replacement part contain new O ring/washer?
Does DELTA Aerator replacement part contain new O ring/washer? The picture of Model #:RP32529 shows a black washer but I want to be sure a new washer is included.
Thank you for your question. The black rubber washer will be included with the aerator.
Date published: 2016-01-04
Need to order replacement aerator for my Saxony kitchen faucet Model 473-SD
Does the part come with everything included, i.e. screens and washer and whatever else is needed for proper flow? Thanks.
Thank you for your question! Model# RP32529SS is the aerator only. Please see the attached comprehensive list of parts for the Saxony Kitchen Faucet.
Date published: 2013-10-22
Will this fit 15/16 outside thread?
Hi Glenda, Thank you for your question!
The RP32529 2.2gpm aerator has a thread size of 15/16"-27 Male thread.
Date published: 2016-03-21
Regarding the RP32529 Aerator assembly, can I purchase the rubber washer and plastic filter insert separately? If so, what are the part numbers and
(Continued) and associated costs?
Hi Mike, Thank you for your question!
The gasket and screw can not be ordered separately. You will have to order the complete RP32529 aerator assembly.
Date published: 2016-03-28
Kitchen faucet aerators - 1.8 gallons per minute or less
City is requiring kitchen faucet aerators of 1.8 GPM or less. Does Delta make an aerator that fits this requirement? If so, can I get an part number? Thanks in advance.
Hi Newbie, Thank you for your question!
The RP32529 2.2Gpm aerator thread size of 15/16"-27 Male thread. We do carry the RP70719 1.8gpm aerator which has the same thread size.
Date published: 2016-03-01
what is the diameter of areator rp32529?
Thank you for your question, forpart. This aerator has a thread size of 15/16"-27.
Best regards, Jon
Date published: 2018-10-11
What is the procedure for replacing the aerator?
I have a reduced flow issue and suspect the aerator is clogged with bits of metal from old pipes. Before I replaced the faucet with the new 16997-SD-DST I would simply unscrew my old aerator and clean it. The aerator does not appear to easily unscrew on the new 16997 so I guess my question would be how to get the aerator out of the faucet?
The only other assembly, with the reduced flow issues on both hot and cold water would be the valve assembly, correct?
Thank you for your question. Delta Faucet model # 16997-SD-DST will have an aerator that should unscrew from the wand by using channel locks. We also recommend flushing the lines to remove any metal bits. This can be done by taking the wand off the hose and letting the water run freely for 1-3 minutes.
Date published: 2014-11-26