End Valve Assembly - Roman Tub - R2700 / R4700

Model#: RP40510

Download Image

  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 208ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
California Prop 65 WARNING
Finish: Not Applicable
List Price*: $58.05
Base Parts
List Price*: $58.05

Product Support, Repair Parts & Technical Specifications

Installation Information

  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 15ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

does it make a difference if the hot valve is connected onto the cold water supply and vis-versa?

Asked by: mam
Thank you for your question. Operationally the faucet will work if you switch the hot and cold supply lines. However, your handles will then work backwards. Typically, hot is on the left and cold is on the right. As long as the bathers know the difference, there is not a potential to scald anyone.
Answered by: Delta1
Date published: 2013-10-22

is this covered under Delta's warranty?

Roman Tub End Valve Assembly - R2700 and R4700 Read more:
Asked by: Daniel
Hi Daniel, Thank you for your question. Delta® Non-Electronic Lifetime Faucet and Finish Limited Warranty All parts and finishes of the Delta faucet are warranted to the original consumer purchaser to be free from defects in material and workmanship for as long as the original consumer purchaser owns their home. Delta recommends using a professional plumber for all installation and repair. Delta will replace, FREE OF CHARGE, during the warranty period, any part or finish that proves defective in material and/or workmanship under normal installation, use and service. Replacement parts may be obtained by calling 1‑800‑345‑DELTA (3358). If your faucet meets the above criteria the parts will be covered under the warranty. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2015-01-13

How do you set up the end valve assembly for hot (left side) use vs cold (right side) use?

Asked by: Neal
Thank you for your question! The valve should be installed with the long corrugated tube toward the spout and the supply tube on the outside. The stem should be oriented with the raised plastic piece to the right and the brass stem facing away from the spout. The brass stem can be turned by hand. To flip the stem unit around completely, ensure that the water supply is turned off, then unscrew the bonnet nut, pull out the stem and rotate it 180 degrees. Please refer to the installation guide for your rough-in valve for more information. Best regards, Jon
Answered by: Delta Faucet
Date published: 2018-08-08

Installation instructions

for a RP40510.
Asked by: jkirkpitman
Thank you for your question. Included here is a link the installation instructions for the R4707 which includes the RP40510.
Answered by: Delta1
Date published: 2013-10-22
  • y_2019, m_2, d_21, h_24CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_RP40510, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 70ms