How do I install the sprayer assembly with hose?
I received a new RP51480SP replacement for a leak that I am having. I turned off the water, took the clip off between the hose assembly and water line, and removed the old one. When I try to put the new one through the faucet surround it gets stuck around the area where the "friction spacer" is. How do I get the new hose to go all the way down?
Thank you for your question. To install the hose assembly, you make need to remove the spout arm from your faucet body, then install the hose through the spout and then down the faucet body opening.
Date published: 2017-11-11
Need a replacement wrench to fix this item
When the plumber installed my Delta faucet, he neglected to give me the " small blue T-shaped wrench that will allow you to remove the aerator from the RP51480 wand assembly". I would like to acquire a replacement wrench so that I can clean the screens.
Hi Ray, Thank you for your question. The wrench for the RP51480SS wand assembly is available to order as part of RP50815.
Date published: 2015-04-06
What size O-rings inside
After about 1 year of use, I soaked the wand assembly in a vinegar solution to remove buildup, and after that, the spray select mechanism has started to fail. When i press the button to select spray, some water still drips out the aerator. When I press the button for the aerator, some water still drips out the spray ports. I believe replacing the o-rings on the spray select mechanism inside this assembly would help, but i need to know the part number or specs of the o-ring. Thanks.
Hi Sean, Thank you for your question. Unfortunately we do not offer the internal components of the 51480SS wand assembly as separate items. The entire wand will need to be replaced.
Date published: 2015-02-19
How do you disassemble to clean for low flow?
Hi Matt, Thank you for your question. Your faucet would have came with a small blue T-shaped wrench that will allow you to remove the aerator from the RP51480 wand assembly. Check the supply lines under the sink for the wrench as it can clip onto the pex supply lines. If you need the wrench it can be ordered as part of RP50815.
You can soak the wand assembly in a 50/50 solution of vinegar and water to help clean the mineral build up, be sure to rinse when done.
Date published: 2016-04-30
Repair Aerator for RP51480RB
I am trying to locate the repair aerator for the above model number. I do not need the whole wand assembly. The text on the wand assembly indicates 2.2 GPM. Can you please direct me to the correct part and how can I get a replacement for my faucet? Thank you.
Hi txhawk, Thank you for your question. The RP53998 is a 2.2 gpm cache aerator that will fit the RP51480RB wand assembly. The aerator can be ordered online at deltafaucet.com.
Date published: 2015-03-22