Will this work with the 600 series round stem?
I have a Delta Brilliance Polished Brass shower and tub spout with pull down diverter that seems to be a 600 series with what Pfister's Universal Trim Kit says is a "round stem." It's like the one pictured, but instead of the circle piece with the slot in it, there is a circle piece with a triangle. The water turns on by lifting the handle, and adjusts hot or cold by moving the handle side to side. Will this kit work with that? And what kind of tub spout can I use to replace the pull down spout? I'm trying to renovate to a different color.
Hi Joby, Thank you for your question. The RP54870 600 series renovation kit comes in chrome, brilliance stainless, and venetian bronze finishes. The kit will come with the necessary parts to convert from the acrylic knob handle to a lever style handle.
We do not recommend using competitors parts with our faucets and doing so will void the product warranty.
The pull down diverter tub spout is available as the RP17543 in the chrome and brilliance stainless finishes.
Date published: 2015-03-29
Re-tiling over existing tiles on shower wall.
I am putting new tiles over existing tiles and this will bring this trim out approx. 5/16". The bonnet nut still shows with about 1/8" clearance behind it and the screws are long enough. The question is; will any of the trim interfere with the movement of the handle and if it does, is there an extension available? The old plastic handle would still work.
Thank you for your question! The new tile should not cause any issue with the operation of the handle.
Date published: 2015-06-29
Is this metal?
Thank you for your question, Cheri! The trim parts and ball assembly are metal.
Best regards, Jon
Date published: 2018-05-11
I would like to get the renovation kit for the 600 series tub and shower, but what tub spout will fit into the existing piping?
The tub spout I have screws on to a male coupling. Are there any delta tub spouts that will go with the 600 series renovation kit in the bronze color? The piping sticks out about 1.5 inches from the wall.
Thank you for your question. Delta Faucet model # RP54870RB does not include the showerhead, tub spout or shower arm and flange in the rennovation kit. We offer a few tub spouts in the Venetian Bronze finish that can be threaded onto a pipe. Here is a list of the model numbers: RP43161RB, RP42915RB, RP34357RB, RP51303RB, RP52148RB, RP53419RB, RP61269RB, and RP72565RB.
Date published: 2013-10-22
Replacement parts for 1992 gold to venetian bronze
Shower/ tub with diverter on tub spout, Installed assume series 600 since escutcheon screw at 7 and 5 o clock positions
Has acrylic knob want something in Oil rubbed bronze with handle. What retro fit parts do we need.,
Master bedroom has shower head only same series of hardware with acrylic knob want to go with a venetian bronze to match delta hand hold shower head already purchased What kit is needed. Want handle here too,
Thank you for your question! The RP54870RB will include all of the needed parts for the valve trim on a 600 series. A 600 series handle will tilt up and down to control the volume and left and right to control temperature, as well has having screws at 5 & 7 o'clock on the plate.
The tub spout, shower head, arm, and flange must be purchased separately. Please click the link below to browse our selection.
Date published: 2015-06-09
I have a picture of my tub and shower handles that were original with our home (1995). Will this renovation kit work to replace these? I see that I will need a plug for the diverter opening in the tub faucet. What other parts do I need?
Thanks so much for your help!
Thank you for your question! You have a 1500 series tub/shower unit. Unfortunately, we do not have a trim kit for 1500 series units with screw holes at 5 and 7 o'clock. However, we do have some replacement parts available. I have attached the parts diagram.
Date published: 2018-09-03
Will this reno kit replace the chrome 132900 that i have now?
Thank you for your question. The Delta RP54870RB renovation kit works with our Delta 600 series trim kits. We recommend any of our Monitor or TempAssure trim kits to change the trim for your Delta 132900 model. Here is a link to these kits:
Date published: 2019-02-02
how do i get a 1-3/4 dia x 1-7/8 long sleeve in venetian bronze
the one supplied in the renovation kit is only 1-3/8 long.
Thank you for your question. Delta Faucet model # RP54870RB has sleeve included in the renovation kit. This is the only sleeve we have available in that finish for the 600 series models.
Date published: 2013-10-22