Delta

Drain Stopper - Bathroom

Model#: RP5648RB

Download Image

RP5648RB is rated 4.5 out of 5 by 4.
  • y_2018, m_12, d_14, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_RP5648RB, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 14ms
  • REVIEWS, PRODUCT
Finish: Venetian Bronze
List Price*: $28.00
Base Parts
RP5648RB
List Price*: $28.00

Product Support, Repair Parts & Technical Specifications


Installation Information


Rated 3 out of 5 by from True Delta Part?? I found this same generic part at the local hardware store for less after shipping, but didn't get it because I was looking for a true Delta part that said "Delta" on it (so it would match the other sink). I kept it, put it in a bathroom with a single sink, and moved the matching Delta one to the 2-sink bathroom. It looks fine, just was looking for a real match.
Date published: 2011-04-16
Rated 5 out of 5 by from Worked great/saved $ Went to several stores trying to replace this part and was told I needed to replace the entire assembly!!! All generic replacement parts didn't fit. This part wasn't expensive and fit perfectly. Thanks.
Date published: 2010-05-03
Rated 5 out of 5 by from Install With Your Eyes Closed Looks great and could not be easier to install and maintain.
Date published: 2009-12-09
Rated 5 out of 5 by from Simple and elegant Consistent quality and simply constructed...
Date published: 2009-07-25
  • y_2018, m_12, d_14, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_RP5648RB, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 12ms
  • REVIEWS, PRODUCT

how do replace the cap only? The one we have screws on and the remainder to the stopper stays in the drain.

Asked by: ps
Hi ps, Thank you for your question. We do not recommend to remove the cap from the stopper. In some installations, you will first need to remove the horizontal rod to take out the stopper. Simply loosen the nut on the back of the drain, pull out the horizontal rod then lift out the stopper. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2017-02-15

We have the Vessona 25925-RB, will this stopper fit that faucet?

Asked by: Jen
Hi Jen, Thank you for your question! This stopper will work with the pop-up assembly from the 25925-RB. Thanks, Jon
Answered by: DeltaFaucet3
Date published: 2015-06-17

We have Cassidy polished nickel faucet and drains. Does this come in polished nickel? Is another finish term the same as polished nickel? If not what should purchase?

Asked by: Dennis Mac
Hi, Dennis Mac! Thank you for your question. We no longer have the RP5648 available in the Polished Nickel finish. We do have the RP26533 in Polished Nickel, if needed. Here is a link to the unit: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP26533PN Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2018-02-12

How do you remove the stopper to clean the drain?

I have attempted to rotate the stopper while open and it does not disengage from the lever arm.
Asked by: Dennis
Yes, a stopper does have to be removeable in order to clean the gunk that collects on the underside of the stopper and underneath. Delta Customer Service by phone says that although the tailpipe is connected to the lift rod assembly, this stopper can indeed be twisted off in the sink for cleaning purposes. Either Delta has changed the design since a rep answered this question a while back, or CS is wrong. Need to know before purchasing!
Answered by: beulah
Date published: 2017-06-24

is this stopper 1 3/8" by 5"?

Asked by: Ron
Hi Ron, Thank you for your question. The RP5648SS stopper does measure 1-3/8" x 5". Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2015-05-05

I have a stopper that has a stopper cap (the part plugging up the drain) that is only 1.25" in diameter. The four flanges that go down into the drain must be smaller than usual, because I've picked up a couple of universal-sized kits and they're toogbih

Asked by: Robin
Hello Robin, Thank you for your inquiry! The Delta Stopper assembly RP5648PT is designed to work with the RP23060PT flange. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP23060PT Best regards, Tanya
Answered by: Delta Faucet
Date published: 2018-11-24

I need to order this stopper as i have double sinks but lost one, my current one says delta in the middle, the one pictured doesn't is that correct?

Asked by: Becca
Hi Becca, Thank you for your question. You are correct that the RP5648 stopper does not have "Delta" on the stopper. Unfortunately none of our current drain assemblies or stoppers have Delta on them. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2015-07-06

Is the washer/gasket on the Delta Drain Stopper replaceable or must one purchase the entire stopper?

Asked by: Gene
Thank you for your question, Gene! At this time there is not a separate part number for the washer/gasket on Delta Faucet model #RP5648. The entire stopper will need to be ordered. Please feel free to contact our Homeowner/Warranty experts at 800-551-1508.
Answered by: Delta
Date published: 2013-10-22
  • y_2018, m_12, d_14, h_16CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_22
  • loc_en_US, sid_RP5648RB, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 13ms
  • QUESTIONS, PRODUCT