Delta

Drain Assembly- Plastic Pop-Up - Less Lift Rod - Bathroom

Model#: RP62472BN

Download Image

  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 179ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Finish: Brushed Nickel
List Price*: $37.15
Base Parts
RP62472BN
List Price*: $37.15

Special Features

Product Support, Repair Parts & Technical Specifications


Installation Information


  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 9ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

I need a brush nickle bathroom sink drain ring

I should not have to speed $28.00 for a whole drain assembly when all I need is a drain ring
Asked by: Kenny
Hi Kenny, Thank you for your question. The RP62472BN is only available as the entire drain assembly. We do offer the RP23060BN drain flange as a separate piece that although different than yours will work with your existing drain assembly. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2014-01-24

Washer on the backside of the drain

is the washer on the lever arm on the backside of the drain for the lever/ ball arm available?
Asked by: GJ
Hi Greg, Thank you for your question. The pivot seat and gasket used with the horizontal rod on the back of the drain assembly is available to order as RP6130. http://www.deltafaucet.com/repairparts/details/rp6130.html?showPhotoGallery=false Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2016-06-04

Is there a gasket or seal under the stopper flange? I have a leak between the flange and the bottom of the sink. Instructions call for a silicone bead

Asked by: scoop
Hi scoop, Thank you for your question. We do recommend to use silicone under the flange. Unfortunately, we do not provide a gasket to go between the flange and sink. Please be sure to allow the silicone to fully cure (usually 24 hrs) before running water from the faucet. However, the included gasket should seal against the under side of the sink. If the sink is rough or uneven, you may need to use a thin bead of silicone. Please not that this pop up will only work with sinks with a depth of 1 5/8 - 2 3/8". Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2016-03-28

Can you order the rod for the drain lift?

The end of it rusted off .Tried a short one and its a problem
Asked by: rusty
Hi Rusty, Thank you for your question. The lift rod that will work with the RP62472 drain assembly is the RP6146. If you need the horizontal rod then RP12517 should work. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2014-09-09

Is there a part number for just the nut that hold the horizontal (ball) rod in?

Looking for the nut that holds the ball/rod in for the plastic pop-up assembly.
Asked by: buchanab
Hi buchanab, Thank you for your question. The nut is not available separately. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2016-06-07

How to order longer horizontal rod,one in the box is not long enough,need one with 10 inch long,installed undermount sink ,wide spread

Asked by: Temo
Hi Temo, Thank you for your question. Unfortunately, we do not manufacture a longer horizontal rod for the RP62472 Plastic Pop-Up assembly. However, we do manufacture a Metal Pop-Up assembly and Push Pop-Up assembly. We also do have longer horizontal rod options for the metal pop-up assembly. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP26533 https://www.deltafaucet.com/parts-product-detail?modelNumber=72173 Best regards, Tanya
Answered by: Tanya
Date published: 2018-03-26

Do you have this part in metal not plastic Model#: RP62472. I have (3) of 15741LF-SP that I want to install with metal drain / pop up due to temperature fluctuations here.. Thank you 

Asked by: Val20
Hi, Val20! Thank you for your question. We do have an all Metal Pop Up drain assembly. The model number is RP26533. Here is a link to this assembly: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP26533
Answered by: Delta Faucet
Date published: 2018-06-08

Can I just get the rod with the ball on it?

Can I just get the rod with a ball on it or do I have to buy the whole drain and every thing? The original rusted into two pieces poor design. Just over two years old.
Asked by: John V
Hi John V, Thank you for your question! You will need to order the RP12517 horizontal rod. Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2017-10-24
  • y_2019, m_3, d_18, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_22
  • loc_en_US, sid_RP62472BN, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 185ms
  • QUESTIONS, PRODUCT